[U-Boot-Users] [PATCH 1/3] mpc8323erdb: use readable DDR config macros

[Michael Barkowski]

Use available shift/mask macros to define DDR configuration.

Signed-off-by: Michael Barkowski <michael.barkowski at freescale.com>
Acked-by: Kim Phillips <kim.phillips at freescale.com>
---
 include/configs/MPC8323ERDB.h |   50 ++++++++++++++++++++++++++++++++++------
 1 files changed, 42 insertions(+), 8 deletions(-)

diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index bf5ef4b..53322d6 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -82,17 +82,51 @@
 /* Manually set up DDR parameters
  */
 #define CFG_DDR_SIZE		64	/* MB */
-#define CFG_DDR_CS0_CONFIG	0x80840101
-#define CFG_DDR_TIMING_0	0x00220802
-#define CFG_DDR_TIMING_1	0x3935d322
-#define CFG_DDR_TIMING_2	0x0f9048ca
+#define CFG_DDR_CS0_CONFIG	( CSCONFIG_EN \
+				| CSCONFIG_AP \
+				| 0x00040000 /* TODO */ \
+				| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9 )
+				/* 0x80840101 */
+#define CFG_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
+				| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+				/* 0x00220802 */
+#define CFG_DDR_TIMING_1	( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
+				| ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+				| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
+				| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
+				| (13 << TIMING_CFG1_REFREC_SHIFT ) \
+				| ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
+				| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
+				| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+				/* 0x3935d322 */
+#define CFG_DDR_TIMING_2	( (31 << TIMING_CFG2_CPO_SHIFT ) \
+				| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
+				| ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
+				| ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
+				| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
+				| (10 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+				/* 0x0f9048ca */
 #define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_CLK_CNTL	0x02000000
-#define CFG_DDR_MODE		0x44400232
+#define CFG_DDR_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+				/* 0x02000000 */
+#define CFG_DDR_MODE		( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \
+				| ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
+				/* 0x44400232 */
 #define CFG_DDR_MODE2		0x8000c000
-#define CFG_DDR_INTERVAL	0x03200064
+#define CFG_DDR_INTERVAL	( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+				| ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+				/* 0x03200064 */
 #define CFG_DDR_CS0_BNDS	0x00000003
-#define CFG_DDR_SDRAM_CFG	0x43080000
+#define CFG_DDR_SDRAM_CFG	( SDRAM_CFG_SREN \
+				| SDRAM_CFG_SDRAM_TYPE_DDR2 \
+				| SDRAM_CFG_32_BE )
+				/* 0x43080000 */
 #define CFG_DDR_SDRAM_CFG2	0x00401000
 #endif
 
-- 
1.5.3.6