[U-Boot-Users] [PATCH] DM644x: (2nd try) This patch removes all board specific code from the arch. part for DM644x (DaVinci) boards

[Pieter Voorthuijsen]

Hello Jean-Christophe,

Thanks for looking into the code, unfortunatly I cannot use the
git-send-email :( Outlook seems to only be able to wrap so I'll attach
the pacthes as a file... I double checked for spaces and coding style..

Here's the original subject:

In the current implementation of the DM644x (DaVinci) achitecture there
is a lot of code in the /cpu/arm926ejs/davinci folder that is meant to
be board specific. I'm talking about EMIF timing/width configuration for
NAND and NOR but also DRAM timing settings which are of course different
for boards. This patch makes the board config files configure the
architecture files (lowlevel_init.S and nand.c) with defines.

Also there is a small addition to add support for the DVEVM, the only
difference is an Intel NOR instead of an AMD, so blocksizes are
different.

This is tested with the Davinci EVM (Old and new one), the other boards
(Sonata and Schmoogie) are building with these patches.


Best regards,
Pieter

Pieter Voorthuijsen
Prodrive B.V.
Science Park Eindhoven
P.O. box 28030
5602 JA Eindhoven
The Netherlands

Email pieter.voorthuijsen at prodrive.nl
Tel: +31-40-2676258
Fax: +31-40-2676201
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-DM644x-This-patch-removes-all-boardspecific-code-fr.patch
Type: application/octet-stream
Size: 14169 bytes
Desc: 0001-DM644x-This-patch-removes-all-boardspecific-code-fr.patch
Url : http://lists.denx.de/pipermail/u-boot/attachments/20080321/a5ae60bb/attachment.obj