[U-Boot-Users] [PATCH v2] sh: Add support PCI host driver for SH7751/SH7751R
Nobuhiro Iwamatsu
iwamatsu at nigauri.org
Sun Mar 23 18:13:41 CET 2008
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
---
drivers/pci/Makefile | 1 +
drivers/pci/pci_sh7751.c | 199 ++++++++++++++++++++++++++++++++++++++++++++++
include/asm-sh/pci.h | 7 +-
3 files changed, 204 insertions(+), 3 deletions(-)
create mode 100644 drivers/pci/pci_sh7751.c
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ef7781f..ad1b7dd 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -32,6 +32,7 @@ COBJS-y += pci_indirect.o
COBJS-y += tsi108_pci.o
COBJS-y += w83c553f.o
COBJS-$(CONFIG_SH4_PCI) += pci_sh4.o
+COBJS-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
COBJS-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
COBJS := $(COBJS-y)
diff --git a/drivers/pci/pci_sh7751.c b/drivers/pci/pci_sh7751.c
new file mode 100644
index 0000000..13b2193
--- /dev/null
+++ b/drivers/pci/pci_sh7751.c
@@ -0,0 +1,199 @@
+/*
+ * SH7751 PCI Controller (PCIC) for U-Boot.
+ * (C) Dustin McIntire (dustin at sensoria.com)
+ * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+
+/* Register addresses and such */
+#define SH7751_BCR (vu_long *)0xFF800000
+#define SH7751_BCR2 (vu_short*)0xFF800004
+#define SH7751_WCR1 (vu_long *)0xFF800008
+#define SH7751_WCR2 (vu_long *)0xFF80000C
+#define SH7751_WCR3 (vu_long *)0xFF800010
+#define SH7751_MCR (vu_long *)0xFF800014
+#define SH7751_BCR3 (vu_short*)0xFF800050
+#define SH7751_PCICONF0 (vu_long *)0xFE200000
+#define SH7751_PCICONF1 (vu_long *)0xFE200004
+#define SH7751_PCICONF2 (vu_long *)0xFE200008
+#define SH7751_PCICONF3 (vu_long *)0xFE20000C
+#define SH7751_PCICONF4 (vu_long *)0xFE200010
+#define SH7751_PCICONF5 (vu_long *)0xFE200014
+#define SH7751_PCICONF6 (vu_long *)0xFE200018
+#define SH7751_PCICR (vu_long *)0xFE200100
+#define SH7751_PCILSR0 (vu_long *)0xFE200104
+#define SH7751_PCILSR1 (vu_long *)0xFE200108
+#define SH7751_PCILAR0 (vu_long *)0xFE20010C
+#define SH7751_PCILAR1 (vu_long *)0xFE200110
+#define SH7751_PCIMBR (vu_long *)0xFE2001C4
+#define SH7751_PCIIOBR (vu_long *)0xFE2001C8
+#define SH7751_PCIPINT (vu_long *)0xFE2001CC
+#define SH7751_PCIPINTM (vu_long *)0xFE2001D0
+#define SH7751_PCICLKR (vu_long *)0xFE2001D4
+#define SH7751_PCIBCR1 (vu_long *)0xFE2001E0
+#define SH7751_PCIBCR2 (vu_long *)0xFE2001E4
+#define SH7751_PCIWCR1 (vu_long *)0xFE2001E8
+#define SH7751_PCIWCR2 (vu_long *)0xFE2001EC
+#define SH7751_PCIWCR3 (vu_long *)0xFE2001F0
+#define SH7751_PCIMCR (vu_long *)0xFE2001F4
+#define SH7751_PCIBCR3 (vu_long *)0xFE2001F8
+
+#define BCR1_BREQEN 0x00080000
+#define PCI_SH7751_ID 0x35051054
+#define PCI_SH7751R_ID 0x350E1054
+#define SH7751_PCICONF1_WCC 0x00000080
+#define SH7751_PCICONF1_PER 0x00000040
+#define SH7751_PCICONF1_BUM 0x00000004
+#define SH7751_PCICONF1_MES 0x00000002
+#define SH7751_PCICONF1_CMDS 0x000000C6
+#define SH7751_PCI_HOST_BRIDGE 0x6
+#define SH7751_PCICR_PREFIX 0xa5000000
+#define SH7751_PCICR_PRST 0x00000002
+#define SH7751_PCICR_CFIN 0x00000001
+#define SH7751_PCIPINT_D3 0x00000002
+#define SH7751_PCIPINT_D0 0x00000001
+#define SH7751_PCICLKR_PREFIX 0xa5000000
+
+#define SH7751_PCI_MEM_BASE 0xFD000000
+#define SH7751_PCI_MEM_SIZE 0x01000000
+#define SH7751_PCI_IO_BASE 0xFE240000
+#define SH7751_PCI_IO_SIZE 0x00040000
+
+#define SH7751_CS3_BASE_ADDR 0x0C000000
+#define SH7751_P2CS3_BASE_ADDR 0xAC000000
+
+#define SH7751_PCIPAR (vu_long *)0xFE2001C0
+#define SH7751_PCIPDR (vu_long *)0xFE200220
+
+#define p4_in(addr) *(addr)
+#define p4_out(data,addr) *(addr) = (data)
+
+/* Double word */
+int pci_sh4_read_config_dword(struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 * value)
+{
+ u32 par_data = 0x80000000 | dev;
+
+ p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR);
+ *value = p4_in(SH7751_PCIPDR);
+
+ return 0;
+}
+
+int pci_sh4_write_config_dword(struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 * value)
+{
+ u32 par_data = 0x80000000 | dev;
+
+ p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR);
+ p4_out(value, SH7751_PCIPDR);
+
+ return 0;
+}
+
+int pci_sh7751_init(struct pci_controller *hose)
+{
+ /* Double-check that we're a 7751 or 7751R chip */
+ if (p4_in(SH7751_PCICONF0) != PCI_SH7751_ID
+ && p4_in(SH7751_PCICONF0) != PCI_SH7751R_ID) {
+ printf("PCI: Unknown PCI host bridge.\n");
+ return 1;
+ }
+ printf("PCI: SH7751 PCI host bridge found.\n");
+
+ /* Double-check some BSC config settings */
+ /* (Area 3 non-MPX 32-bit, PCI bus pins) */
+ if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) {
+ printf("SH7751_BCR1 0x%08X\n", p4_in(SH7751_BCR1));
+ return 2;
+ }
+ if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) {
+ printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2));
+ return 3;
+ }
+ if (p4_in(SH7751_BCR2) & 0x01) {
+ printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2));
+ return 4;
+ }
+
+ /* Force BREQEN in BCR1 to allow PCIC access */
+ p4_out((p4_in(SH7751_BCR1) | BCR1_BREQEN), SH7751_BCR1);
+
+ /* Toggle PCI reset pin */
+ p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_PRST), SH7751_PCICR);
+ udelay(32);
+ p4_out(SH7751_PCICR_PREFIX, SH7751_PCICR);
+
+ /* Set cmd bits: WCC, PER, BUM, MES */
+ /* (Addr/Data stepping, Parity enabled, Bus Master, Memory enabled) */
+ p4_out(0xfb900047, SH7751_PCICONF1); /* K.Kino */
+
+ /* Define this host as the host bridge */
+ p4_out((SH7751_PCI_HOST_BRIDGE << 24), SH7751_PCICONF2);
+
+ /* Force PCI clock(s) on */
+ p4_out(0, SH7751_PCICLKR);
+ p4_out(0x03, SH7751_PCICLKR);
+
+ /* Clear powerdown IRQs, also mask them (unused) */
+ p4_out((SH7751_PCIPINT_D0 | SH7751_PCIPINT_D3), SH7751_PCIPINT);
+ p4_out(0, SH7751_PCIPINTM);
+
+ p4_out(0xab000001, SH7751_PCICONF4);
+
+ /* Set up target memory mappings (for external DMA access) */
+ /* Map both P0 and P2 range to Area 3 RAM for ease of use */
+ p4_out((64 - 1) << 20, SH7751_PCILSR0);
+ p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCILAR0);
+ p4_out(0, SH7751_PCILSR1);
+ p4_out(0, SH7751_PCILAR1);
+ p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCICONF5);
+ p4_out(0xd0000000, SH7751_PCICONF6);
+
+ /* Map memory window to same address on PCI bus */
+ p4_out(SH7751_PCI_MEM_BASE, SH7751_PCIMBR);
+
+ /* Map IO window to same address on PCI bus */
+ p4_out(0x2000 & 0xfffc0000, SH7751_PCIIOBR);
+
+ /* set BREQEN */
+ p4_out(inl(SH7751_BCR1) | 0x00080000, SH7751_BCR1);
+
+ /* Copy BSC registers into PCI BSC */
+ p4_out(inl(SH7751_BCR1), SH7751_PCIBCR1);
+ p4_out(inl(SH7751_BCR2), SH7751_PCIBCR2);
+ p4_out(inl(SH7751_BCR3), SH7751_PCIBCR3);
+ p4_out(inl(SH7751_WCR1), SH7751_PCIWCR1);
+ p4_out(inl(SH7751_WCR2), SH7751_PCIWCR2);
+ p4_out(inl(SH7751_WCR3), SH7751_PCIWCR3);
+ p4_out(inl(SH7751_MCR), SH7751_PCIMCR);
+
+ /* Finally, set central function init complete */
+ p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN), SH7751_PCICR);
+
+ pci_sh4_init(hose);
+
+ return 0;
+}
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
index 821961f..bc59491 100644
--- a/include/asm-sh/pci.h
+++ b/include/asm-sh/pci.h
@@ -1,7 +1,7 @@
/*
* SH4 PCI Controller (PCIC) for U-Boot.
* (C) Dustin McIntire (dustin at sensoria.com)
- * (C) 2007 Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
+ * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
* (C) 2008 Yusuke Goda <goda.yusuke at renesas.com>
*
* u-boot/include/asm-sh/pci.h
@@ -28,8 +28,9 @@
#define _ASM_PCI_H_
#include <pci.h>
-
-#if defined(CONFIG_CPU_SH7780)
+#if defined(CONFIG_SH7751_PCI)
+int pci_sh7751_init(struct pci_controller *hose);
+#elif defined(CONFIG_SH7780_PCI)
int pci_sh7780_init(struct pci_controller *hose);
#else
#error "Not support PCI."
--
1.5.4.3
More information about the U-Boot
mailing list