[U-Boot-Users] [PATCH v3 0/10] SATA framework and Freescale SATA controller support patch set
Wolfgang Denk
wd at denx.de
Wed Mar 26 12:27:03 CET 2008
In message <1206524999.3662.4.camel at localhost.localdomain> you wrote:
>
> Dave Liu (10):
> ata: merge the ata_piix driver
> ata: add the support for SATA framework
> ata: make the ata_piix driver using new SATA framework
> ata: add the libata support
> ata: add the fis struct for SATA
> ata: enable the sata init on bootup
> ata: add the readme for SATA command line
> mpc83xx: initialize serdes for MPC837xEMDS boards
> drivers: Add the support for Freescale SATA controller
> mpc83xx: enable the SATA interface on mpc837xemds board
You don't mention anythiong about the sc520 board here, yet...
> board/freescale/mpc837xemds/mpc837xemds.c | 33 +
> common/Makefile | 2 +-
> common/cmd_sata.c | 768 +++
> +--------------------
> disk/part.c | 14 +
> disk/part_dos.c | 2 +
> disk/part_iso.c | 2 +
> disk/part_mac.c | 1 +
> doc/README.sata | 69 +++
> drivers/block/Makefile | 2 +
> drivers/block/ata_piix.c | 585 ++++++++++++++++++-
> drivers/block/fsl_sata.c | 921 ++++++++++++++++++++++
> +++++++
> drivers/block/fsl_sata.h | 374 ++++++++++++
> drivers/block/libata.c | 158 +++++
> include/configs/MPC837XEMDS.h | 28 +
> include/configs/sc520_cdp.h | 27 +-
...you're trying to sneak in configuration changes here.
Have these been tested?
If yes, then please split these off into a separate patch.
If not, then just dump it.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The first thing we do is kill all the lawyers.
(Shakespeare. II Henry VI, Act IV, scene ii)
More information about the U-Boot
mailing list