[U-Boot-Users] [PATCH v4 2/9] ata: merge the header of ata_piix driver

Dave Liu r63238 at freescale.com
Wed Mar 26 15:48:18 CET 2008


move the sata.h from include/ to drivers/block/ata_piix.h

Signed-off-by: Dave Liu <daveliu at freescale.com>
---
 drivers/block/ata_piix.c |    2 +-
 drivers/block/ata_piix.h |   92 ++++++++++++++++++++++++++++++++++++++++++++++
 include/sata.h           |   92 ----------------------------------------------
 3 files changed, 93 insertions(+), 93 deletions(-)
 create mode 100644 drivers/block/ata_piix.h
 delete mode 100644 include/sata.h

diff --git a/drivers/block/ata_piix.c b/drivers/block/ata_piix.c
index 806ec1a..9ba6918 100644
--- a/drivers/block/ata_piix.c
+++ b/drivers/block/ata_piix.c
@@ -41,7 +41,7 @@
 
 #define SATA_DECL
 #define DRV_DECL		/*For file specific declarations */
-#include <sata.h>
+#include "ata_piix.h"
 
 /*Macros realted to PCI*/
 #define PCI_SATA_BUS	0x00
diff --git a/drivers/block/ata_piix.h b/drivers/block/ata_piix.h
new file mode 100644
index 0000000..bb1acb3
--- /dev/null
+++ b/drivers/block/ata_piix.h
@@ -0,0 +1,92 @@
+
+#if (DEBUG_SATA)
+#define PRINTF(fmt,args...)	printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+struct sata_ioports {
+	unsigned long cmd_addr;
+	unsigned long data_addr;
+	unsigned long error_addr;
+	unsigned long feature_addr;
+	unsigned long nsect_addr;
+	unsigned long lbal_addr;
+	unsigned long lbam_addr;
+	unsigned long lbah_addr;
+	unsigned long device_addr;
+	unsigned long status_addr;
+	unsigned long command_addr;
+	unsigned long altstatus_addr;
+	unsigned long ctl_addr;
+	unsigned long bmdma_addr;
+	unsigned long scr_addr;
+};
+
+struct sata_port {
+	unsigned char port_no;		/* primary=0, secondary=1	*/
+	struct sata_ioports ioaddr;	/* ATA cmd/ctl/dma reg blks	*/
+	unsigned char ctl_reg;
+	unsigned char last_ctl;
+	unsigned char port_state;	/* 1-port is available and	*/
+					/* 0-port is not available	*/
+	unsigned char dev_mask;
+};
+
+/***********SATA LIBRARY SPECIFIC DEFINITIONS AND DECLARATIONS**************/
+#ifdef SATA_DECL		/*SATA library specific declarations */
+#define ata_id_has_lba48(id)    ((id)[83] & (1 << 10))
+#define ata_id_has_lba(id)      ((id)[49] & (1 << 9))
+#define ata_id_has_dma(id)      ((id)[49] & (1 << 8))
+#define ata_id_u32(id,n)        \
+	(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
+#define ata_id_u64(id,n)        \
+	(((u64) (id)[(n) + 3] << 48) | \
+	((u64) (id)[(n) + 2] << 32) | \
+	((u64) (id)[(n) + 1] << 16) | \
+	((u64) (id)[(n) + 0]) )
+#endif
+
+#ifdef SATA_DECL		/*SATA library specific declarations */
+static inline void
+ata_dump_id (u16 * id)
+{
+	PRINTF ("49==0x%04x  "
+		"53==0x%04x  "
+		"63==0x%04x  "
+		"64==0x%04x  "
+		"75==0x%04x  \n", id[49], id[53], id[63], id[64], id[75]);
+	PRINTF ("80==0x%04x  "
+		"81==0x%04x  "
+		"82==0x%04x  "
+		"83==0x%04x  "
+		"84==0x%04x  \n", id[80], id[81], id[82], id[83], id[84]);
+	PRINTF ("88==0x%04x  " "93==0x%04x\n", id[88], id[93]);
+}
+#endif
+
+#ifdef SATA_DECL		/*SATA library specific declarations */
+int sata_bus_softreset (int num);
+void sata_identify (int num, int dev);
+void sata_port (struct sata_ioports *ioport);
+void set_Feature_cmd (int num, int dev);
+int sata_devchk (struct sata_ioports *ioaddr, int dev);
+void dev_select (struct sata_ioports *ioaddr, int dev);
+u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max);
+u8 sata_chk_status (struct sata_ioports *ioaddr);
+ulong sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buffer);
+ulong sata_write (int device,ulong blknr, lbaint_t blkcnt, void * buffer);
+void msleep (int count);
+#endif
+
+/************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/
+
+#ifdef DRV_DECL			/*Driver specific declaration */
+int init_sata (void);
+#endif
+
+#ifdef DRV_DECL			/*Defines Driver Specific variables */
+struct sata_port port[CFG_SATA_MAXBUS];
+block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES];
+int curr_dev = -1;
+#endif
diff --git a/include/sata.h b/include/sata.h
deleted file mode 100644
index bb1acb3..0000000
--- a/include/sata.h
+++ /dev/null
@@ -1,92 +0,0 @@
-
-#if (DEBUG_SATA)
-#define PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-struct sata_ioports {
-	unsigned long cmd_addr;
-	unsigned long data_addr;
-	unsigned long error_addr;
-	unsigned long feature_addr;
-	unsigned long nsect_addr;
-	unsigned long lbal_addr;
-	unsigned long lbam_addr;
-	unsigned long lbah_addr;
-	unsigned long device_addr;
-	unsigned long status_addr;
-	unsigned long command_addr;
-	unsigned long altstatus_addr;
-	unsigned long ctl_addr;
-	unsigned long bmdma_addr;
-	unsigned long scr_addr;
-};
-
-struct sata_port {
-	unsigned char port_no;		/* primary=0, secondary=1	*/
-	struct sata_ioports ioaddr;	/* ATA cmd/ctl/dma reg blks	*/
-	unsigned char ctl_reg;
-	unsigned char last_ctl;
-	unsigned char port_state;	/* 1-port is available and	*/
-					/* 0-port is not available	*/
-	unsigned char dev_mask;
-};
-
-/***********SATA LIBRARY SPECIFIC DEFINITIONS AND DECLARATIONS**************/
-#ifdef SATA_DECL		/*SATA library specific declarations */
-#define ata_id_has_lba48(id)    ((id)[83] & (1 << 10))
-#define ata_id_has_lba(id)      ((id)[49] & (1 << 9))
-#define ata_id_has_dma(id)      ((id)[49] & (1 << 8))
-#define ata_id_u32(id,n)        \
-	(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
-#define ata_id_u64(id,n)        \
-	(((u64) (id)[(n) + 3] << 48) | \
-	((u64) (id)[(n) + 2] << 32) | \
-	((u64) (id)[(n) + 1] << 16) | \
-	((u64) (id)[(n) + 0]) )
-#endif
-
-#ifdef SATA_DECL		/*SATA library specific declarations */
-static inline void
-ata_dump_id (u16 * id)
-{
-	PRINTF ("49==0x%04x  "
-		"53==0x%04x  "
-		"63==0x%04x  "
-		"64==0x%04x  "
-		"75==0x%04x  \n", id[49], id[53], id[63], id[64], id[75]);
-	PRINTF ("80==0x%04x  "
-		"81==0x%04x  "
-		"82==0x%04x  "
-		"83==0x%04x  "
-		"84==0x%04x  \n", id[80], id[81], id[82], id[83], id[84]);
-	PRINTF ("88==0x%04x  " "93==0x%04x\n", id[88], id[93]);
-}
-#endif
-
-#ifdef SATA_DECL		/*SATA library specific declarations */
-int sata_bus_softreset (int num);
-void sata_identify (int num, int dev);
-void sata_port (struct sata_ioports *ioport);
-void set_Feature_cmd (int num, int dev);
-int sata_devchk (struct sata_ioports *ioaddr, int dev);
-void dev_select (struct sata_ioports *ioaddr, int dev);
-u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max);
-u8 sata_chk_status (struct sata_ioports *ioaddr);
-ulong sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buffer);
-ulong sata_write (int device,ulong blknr, lbaint_t blkcnt, void * buffer);
-void msleep (int count);
-#endif
-
-/************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/
-
-#ifdef DRV_DECL			/*Driver specific declaration */
-int init_sata (void);
-#endif
-
-#ifdef DRV_DECL			/*Defines Driver Specific variables */
-struct sata_port port[CFG_SATA_MAXBUS];
-block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES];
-int curr_dev = -1;
-#endif
-- 
1.5.4.rc4







More information about the U-Boot mailing list