[U-Boot-Users] [PATCH ARM/AT91 05/10] Finish header files reworking

Stelian Pop stelian at popies.net
Wed Mar 26 22:52:31 CET 2008


Replace AT91CAP9.h file with several splitted header files coming
from the Linux kernel.

This is part 3 of the replacement: more header imports and edits.

Signed-off-by: Stelian Pop <stelian at popies.net>
---
 include/asm-arm/arch-at91sam9/at91_spi.h   |   24 ++
 include/asm-arm/arch-at91sam9/clk.h        |    4 +-
 include/asm-arm/arch-at91sam9/gpio.h       |  368 ++++++++++++++++++++++++++++
 include/asm-arm/arch-at91sam9/hardware.h   |   38 ++-
 include/asm-arm/arch-at91sam9/io.h         |   40 +++
 include/asm-arm/arch-at91sam9/memory-map.h |   10 +-
 6 files changed, 465 insertions(+), 19 deletions(-)
 create mode 100644 include/asm-arm/arch-at91sam9/gpio.h
 create mode 100644 include/asm-arm/arch-at91sam9/io.h

diff --git a/include/asm-arm/arch-at91sam9/at91_spi.h b/include/asm-arm/arch-at91sam9/at91_spi.h
index f9b9a84..aaad926 100644
--- a/include/asm-arm/arch-at91sam9/at91_spi.h
+++ b/include/asm-arm/arch-at91sam9/at91_spi.h
@@ -78,4 +78,28 @@
 #define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
 #define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
 
+#define AT91_SPI_RPR		0x0100			/* Receive Pointer Register */
+
+#define AT91_SPI_RCR		0x0104			/* Receive Counter Register */
+
+#define AT91_SPI_TPR		0x0108			/* Transmit Pointer Register */
+
+#define AT91_SPI_TCR		0x010c			/* Transmit Counter Register */
+
+#define AT91_SPI_RNPR		0x0110			/* Receive Next Pointer Register */
+
+#define AT91_SPI_RNCR		0x0114			/* Receive Next Counter Register */
+
+#define AT91_SPI_TNPR		0x0118			/* Transmit Next Pointer Register */
+
+#define AT91_SPI_TNCR		0x011c			/* Transmit Next Counter Register */
+
+#define AT91_SPI_PTCR		0x0120			/* PDC Transfer Control Register */
+#define		AT91_SPI_RXTEN		(0x1 << 0)		/* Receiver Transfer Enable */
+#define		AT91_SPI_RXTDIS		(0x1 << 1)		/* Receiver Transfer Disable */
+#define		AT91_SPI_TXTEN		(0x1 << 8)		/* Transmitter Transfer Enable */
+#define		AT91_SPI_TXTDIS		(0x1 << 9)		/* Transmitter Transfer Disable */
+
+#define AT91_SPI_PTSR		0x0124			/* PDC Transfer Status Register */
+
 #endif
diff --git a/include/asm-arm/arch-at91sam9/clk.h b/include/asm-arm/arch-at91sam9/clk.h
index ca65a2a..86da9a6 100644
--- a/include/asm-arm/arch-at91sam9/clk.h
+++ b/include/asm-arm/arch-at91sam9/clk.h
@@ -28,12 +28,12 @@
 
 static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
 {
-	return AT91C_MASTER_CLOCK;
+	return AT91_MASTER_CLOCK;
 }
 
 static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
 {
-	return AT91C_MASTER_CLOCK;
+	return AT91_MASTER_CLOCK;
 }
 
 #endif /* __ASM_ARM_ARCH_CLK_H__ */
diff --git a/include/asm-arm/arch-at91sam9/gpio.h b/include/asm-arm/arch-at91sam9/gpio.h
new file mode 100644
index 0000000..cdd9cc2
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/gpio.h
@@ -0,0 +1,368 @@
+/*
+ * include/asm-arm/arch-at91/gpio.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91_GPIO_H
+#define __ASM_ARCH_AT91_GPIO_H
+
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/at91_pio.h>
+
+#define PIN_BASE		32
+
+#define MAX_GPIO_BANKS		5
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
+#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
+#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
+#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
+#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
+#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
+#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
+#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
+#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
+#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
+#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
+#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
+#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
+#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
+#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
+#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
+#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
+#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
+#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
+#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
+#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
+#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
+#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
+#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
+#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
+#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
+#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
+#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
+#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
+#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
+#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
+#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
+
+#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
+#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
+#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
+#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
+#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
+#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
+#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
+#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
+#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
+#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
+#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
+#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
+#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
+#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
+#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
+#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
+#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
+#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
+#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
+#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
+#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
+#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
+#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
+#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
+#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
+#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
+#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
+#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
+#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
+#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
+#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
+#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
+
+#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
+#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
+#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
+#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
+#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
+#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
+#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
+#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
+#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
+#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
+#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
+#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
+#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
+#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
+#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
+#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
+#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
+#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
+#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
+#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
+#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
+#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
+#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
+#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
+#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
+#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
+#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
+#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
+#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
+#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
+#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
+#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
+
+#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
+#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
+#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
+#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
+#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
+#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
+#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
+#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
+#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
+#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
+#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
+#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
+#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
+#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
+#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
+#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
+#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
+#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
+#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
+#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
+#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
+#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
+#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
+#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
+#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
+#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
+#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
+#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
+#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
+#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
+#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
+#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
+
+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
+
+static unsigned long at91_pios[] = {
+	AT91_PIOA,
+	AT91_PIOB,
+	AT91_PIOC,
+#ifdef AT91_PIOD
+	AT91_PIOD,
+#ifdef AT91_PIOE
+	AT91_PIOE
+#endif
+#endif
+};
+
+
+static inline void *pin_to_controller(unsigned pin)
+{
+	pin -= PIN_BASE;
+	pin /= 32;
+	return (void *)(AT91_BASE_SYS + at91_pios[pin]);
+}
+
+static inline unsigned pin_to_mask(unsigned pin)
+{
+	pin -= PIN_BASE;
+	return 1 << (pin % 32);
+}
+
+/*
+ * mux the pin to the "GPIO" peripheral role.
+ */
+static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup)
+{
+	void 		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+	__raw_writel(mask, pio + PIO_PER);
+	return 0;
+}
+
+
+/*
+ * mux the pin to the "A" internal peripheral role.
+ */
+static inline int at91_set_A_periph(unsigned pin, int use_pullup)
+{
+	void 		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+	__raw_writel(mask, pio + PIO_ASR);
+	__raw_writel(mask, pio + PIO_PDR);
+	return 0;
+}
+
+/*
+ * mux the pin to the "B" internal peripheral role.
+ */
+static inline int at91_set_B_periph(unsigned pin, int use_pullup)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+	__raw_writel(mask, pio + PIO_BSR);
+	__raw_writel(mask, pio + PIO_PDR);
+	return 0;
+}
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
+ * configure it for an input.
+ */
+static inline int at91_set_gpio_input(unsigned pin, int use_pullup)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+	__raw_writel(mask, pio + PIO_ODR);
+	__raw_writel(mask, pio + PIO_PER);
+	return 0;
+}
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
+ * and configure it for an output.
+ */
+static inline int at91_set_gpio_output(unsigned pin, int value)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + PIO_PUDR);
+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+	__raw_writel(mask, pio + PIO_OER);
+	__raw_writel(mask, pio + PIO_PER);
+	return 0;
+}
+
+/*
+ * enable/disable the glitch filter; mostly used with IRQ handling.
+ */
+static inline int at91_set_deglitch(unsigned pin, int is_on)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
+	return 0;
+}
+
+/*
+ * enable/disable the multi-driver; This is only valid for output and
+ * allows the output pin to run as an open collector output.
+ */
+static inline int at91_set_multi_drive(unsigned pin, int is_on)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
+	return 0;
+}
+
+static inline int gpio_direction_input(unsigned pin)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!(__raw_readl(pio + PIO_PSR) & mask))
+		return -EINVAL;
+	__raw_writel(mask, pio + PIO_ODR);
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned pin, int value)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!(__raw_readl(pio + PIO_PSR) & mask))
+		return -EINVAL;
+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+	__raw_writel(mask, pio + PIO_OER);
+	return 0;
+}
+
+/*
+ * assuming the pin is muxed as a gpio output, set its value.
+ */
+static inline int at91_set_gpio_value(unsigned pin, int value)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+	return 0;
+}
+
+/*
+ * read the pin's value (works even if it's not muxed as a gpio).
+ */
+static inline int at91_get_gpio_value(unsigned pin)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+	u32		pdsr;
+
+	pdsr = __raw_readl(pio + PIO_PDSR);
+	return (pdsr & mask) != 0;
+}
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/hardware.h b/include/asm-arm/arch-at91sam9/hardware.h
index ec0a671..0d889ff 100644
--- a/include/asm-arm/arch-at91sam9/hardware.h
+++ b/include/asm-arm/arch-at91sam9/hardware.h
@@ -1,28 +1,42 @@
 /*
- * (C) Copyright 2007
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
+ * include/asm-arm/arch-at91/hardware.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *  Copyright (C) 2003 ATMEL
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
+
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
 
-#include <asm/arch/AT91CAP9.h>
+#if defined(CONFIG_AT91RM9200)
+#include <asm/arch/at91rm9200.h>
+#elif defined(CONFIG_AT91SAM9260)
+#include <asm/arch/at91sam9260.h>
+#elif defined(CONFIG_AT91SAM9261)
+#include <asm/arch/at91sam9261.h>
+#elif defined(CONFIG_AT91SAM9263)
+#include <asm/arch/at91sam9263.h>
+#elif defined(CONFIG_AT91SAM9RL)
+#include <asm/arch/at91sam9rl.h>
+#elif defined(CONFIG_AT91CAP9)
+#include <asm/arch/at91cap9.h>
+#define AT91_BASE_EMAC	AT91CAP9_BASE_EMAC
+#define AT91_BASE_SPI	AT91CAP9_BASE_SPI0
+#define AT91_ID_UHP	AT91CAP9_ID_UHP
+#define AT91_PMC_UHP	AT91CAP9_PMC_UHP
+#elif defined(CONFIG_AT91X40)
+#include <asm/arch/at91x40.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
 
 /*
  * container_of - cast a member of a structure out to the containing structure
diff --git a/include/asm-arm/arch-at91sam9/io.h b/include/asm-arm/arch-at91sam9/io.h
new file mode 100644
index 0000000..be9e9ab
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/io.h
@@ -0,0 +1,40 @@
+/*
+ * include/asm-arm/arch-at91/io.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <asm/io.h>
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+	void *addr = (void *)AT91_BASE_SYS;
+
+	return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+	void *addr = (void *)AT91_BASE_SYS;
+
+	__raw_writel(value, addr + reg_offset);
+}
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/memory-map.h b/include/asm-arm/arch-at91sam9/memory-map.h
index eee7bd6..da98822 100644
--- a/include/asm-arm/arch-at91sam9/memory-map.h
+++ b/include/asm-arm/arch-at91sam9/memory-map.h
@@ -24,11 +24,11 @@
 #ifndef __ASM_ARM_ARCH_MEMORYMAP_H__
 #define __ASM_ARM_ARCH_MEMORYMAP_H__
 
-#include <asm/arch/AT91CAP9.h>
+#include <asm/arch/hardware.h>
 
-#define USART0_BASE AT91C_BASE_US0
-#define USART1_BASE AT91C_BASE_US1
-#define USART2_BASE AT91C_BASE_US2
-#define USART3_BASE AT91C_BASE_DBGU
+#define USART0_BASE AT91_USART0
+#define USART1_BASE AT91_USART1
+#define USART2_BASE AT91_USART2
+#define USART3_BASE (AT91_BASE_SYS + AT91_DBGU)
 
 #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */
-- 
1.5.3.3





More information about the U-Boot mailing list