[U-Boot-Users] [PATCH] Add support for setting the I2C bus speed in fsl_i2c.c

Luigi 'Comio' Mantellini luigi.mantellini at idf-hit.com
Thu Mar 27 10:11:29 CET 2008


This patch seems incompatible with cf547x/548x cpus because the cpu
specific global data doesn't define the i2c1_clk / i2c2_clk attributes.

Best regards,

luigi

On ven, 2008-03-14 at 17:45 -0500, Timur Tabi wrote:

> Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
> the I2C bus speed.  Current 8[356]xx boards define the CFG_I2C_SPEED macro,
> but fsl_i2c.c ignores it and uses conservative value when programming the
> I2C bus speed.
> 
> Signed-off-by: Timur Tabi <timur at freescale.com>
> ---
> 
> This patch is for U-Boot 1.3.3.  It affects 83xx, 85xx, and 86xx.
> 
>  drivers/i2c/fsl_i2c.c |  114 +++++++++++++++++++++++++++++++++++++++++++++----
>  1 files changed, 105 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
> index 22485ea..dde0571 100644
> --- a/drivers/i2c/fsl_i2c.c
> +++ b/drivers/i2c/fsl_i2c.c
> @@ -32,6 +32,8 @@
>  #define I2C_READ_BIT  1
>  #define I2C_WRITE_BIT 0
>  
> +DECLARE_GLOBAL_DATA_PTR;
> +
>  /* Initialize the bus pointer to whatever one the SPD EEPROM is on.
>   * Default is bus 0.  This is necessary because the DDR initialization
>   * runs from ROM, and we can't switch buses because we can't modify
> @@ -43,24 +45,111 @@ static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS
>  static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
>  #endif
>  
> -static volatile struct fsl_i2c *i2c_dev[2] = {
> +static unsigned int i2c_bus_speed[2] = {CFG_I2C_SPEED, CFG_I2C_SPEED};
> +
> +static const struct fsl_i2c *i2c_dev[2] = {
>  	(struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET),
>  #ifdef CFG_I2C2_OFFSET
>  	(struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET)
>  #endif
>  };
>  
> +/* I2C speed map for a DFSR value of 1 */
> +
> +/*
> + * Map I2C frequency dividers to FDR and DFSR values
> + *
> + * This structure is used to define the elements of a table that maps I2C
> + * frequency divider (I2C clock rate divided by I2C bus speed) to a value to be
> + * programmed into the Frequency Divider Ratio (FDR) and Digital Filter
> + * Sampling Rate (DFSR) registers.
> + *
> + * The actual table should be defined in the board file, and it must be called
> + * fsl_i2c_speed_map[].
> + *
> + * The last entry of the table must have a value of {-1, X}, where X is same
> + * FDR/DFSR values as the second-to-last entry.  This guarantees that any
> + * search through the array will always find a match.
> + *
> + * The values of the divider must be in increasing numerical order, i.e.
> + * fsl_i2c_speed_map[x+1].divider > fsl_i2c_speed_map[x].divider.
> + *
> + * For this table, the values are based on a value of 1 for the DFSR
> + * register.  See the application note AN2919 "Determining the I2C Frequency
> + * Divider Ratio for SCL"
> + */
> +static const struct {
> +	unsigned short divider;
> +	u8 dfsr;
> +	u8 fdr;
> +} fsl_i2c_speed_map[] = {
> +	{160, 1, 32}, {192, 1, 33}, {224, 1, 34}, {256, 1, 35},
> +	{288, 1, 0}, {320, 1, 1}, {352, 6, 1}, {384, 1, 2}, {416, 6, 2},
> +	{448, 1, 38}, {480, 1, 3}, {512, 1, 39}, {544, 11, 3}, {576, 1, 4},
> +	{608, 22, 3}, {640, 1, 5}, {672, 32, 3}, {704, 11, 5}, {736, 43, 3},
> +	{768, 1, 6}, {800, 54, 3}, {832, 11, 6}, {896, 1, 42}, {960, 1, 7},
> +	{1024, 1, 43}, {1088, 22, 7}, {1152, 1, 8}, {1216, 43, 7}, {1280, 1, 9},
> +	{1408, 22, 9}, {1536, 1, 10}, {1664, 22, 10}, {1792, 1, 46},
> +	{1920, 1, 11}, {2048, 1, 47}, {2176, 43, 11}, {2304, 1, 12},
> +	{2560, 1, 13}, {2816, 43, 13}, {3072, 1, 14}, {3328, 43, 14},
> +	{3584, 1, 50}, {3840, 1, 15}, {4096, 1, 51}, {4608, 1, 16},
> +	{5120, 1, 17}, {6144, 1, 18}, {7168, 1, 54}, {7680, 1, 19},
> +	{8192, 1, 55}, {9216, 1, 20}, {10240, 1, 21}, {12288, 1, 22},
> +	{14336, 1, 58}, {15360, 1, 23}, {16384, 1, 59}, {18432, 1, 24},
> +	{20480, 1, 25}, {24576, 1, 26}, {28672, 1, 62}, {30720, 1, 27},
> +	{32768, 1, 63}, {36864, 1, 28}, {40960, 1, 29}, {49152, 1, 30},
> +	{61440, 1, 31}, {-1, 1, 31}
> +};
> +
> +/**
> + * Set the I2C bus speed for a given I2C device
> + *
> + * @param dev: the I2C device
> + * @i2c_clk: I2C bus clock frequency
> + * @speed: the desired speed of the bus
> + *
> + * The I2C device must be stopped before calling this function.
> + *
> + * The return value is the actual bus speed that is set.
> + */
> +static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev,
> +	unsigned int i2c_clk, unsigned int speed)
> +{
> +	unsigned short divider = min(i2c_clk / speed, (unsigned short) -1);
> +	unsigned int i;
> +	u8 fdr, dfsr;
> +
> +	/*
> +	 * We want to choose an FDR/DFSR that generates an I2C bus speed that
> +	 * is equal to or lower than the requested speed.  That means that we
> +	 * want the first divider that is equal to or greater than the
> +	 * calculated divider.
> +	 */
> +
> +	for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++)
> +		if (fsl_i2c_speed_map[i].divider >= divider) {
> +			dfsr = fsl_i2c_speed_map[i].dfsr;
> +			fdr = fsl_i2c_speed_map[i].fdr;
> +			speed = i2c_clk / fsl_i2c_speed_map[i].divider;
> +			break;
> +		}
> +
> +	writeb(fdr, &dev->fdr);			/* set bus speed */
> +	writeb(dfsr, &dev->dfsrr);		/* set default filter */
> +
> +	return speed;
> +}
> +
>  void
>  i2c_init(int speed, int slaveadd)
>  {
> -	volatile struct fsl_i2c *dev;
> +	struct fsl_i2c *dev;
>  
>  	dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET);
>  
>  	writeb(0, &dev->cr);			/* stop I2C controller */
>  	udelay(5);				/* let it shutdown in peace */
> -	writeb(0x3F, &dev->fdr);		/* set bus speed */
> -	writeb(0x3F, &dev->dfsrr);		/* set default filter */
> +	i2c_bus_speed[0] = set_i2c_bus_speed(dev, gd->i2c1_clk, speed);
>  	writeb(slaveadd << 1, &dev->adr);	/* write slave address */
>  	writeb(0x0, &dev->sr);			/* clear status register */
>  	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
> @@ -70,12 +159,11 @@ i2c_init(int speed, int slaveadd)
>  
>  	writeb(0, &dev->cr);			/* stop I2C controller */
>  	udelay(5);				/* let it shutdown in peace */
> -	writeb(0x3F, &dev->fdr);		/* set bus speed */
> -	writeb(0x3F, &dev->dfsrr);		/* set default filter */
> +	i2c_bus_speed[1] = set_i2c_bus_speed(dev, gd->i2c2_clk, speed);
>  	writeb(slaveadd << 1, &dev->adr);	/* write slave address */
>  	writeb(0x0, &dev->sr);			/* clear status register */
>  	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
> -#endif	/* CFG_I2C2_OFFSET */
> +#endif
>  }
>  
>  static __inline__ int
> @@ -279,7 +367,14 @@ int i2c_set_bus_num(unsigned int bus)
>  
>  int i2c_set_bus_speed(unsigned int speed)
>  {
> -	return -1;
> +	unsigned int i2c_clk = (i2c_bus_num == 1) ? gd->i2c2_clk : gd->i2c1_clk;
> +
> +	writeb(0, &i2c_dev[i2c_bus_num]->cr);		/* stop controller */
> +	i2c_bus_speed[i2c_bus_num] =
> +		set_i2c_bus_speed(i2c_dev[i2c_bus_num], i2c_clk, speed);
> +	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);	/* start controller */
> +
> +	return 0;
>  }
>  
>  unsigned int i2c_get_bus_num(void)
> @@ -289,7 +384,8 @@ unsigned int i2c_get_bus_num(void)
>  
>  unsigned int i2c_get_bus_speed(void)
>  {
> -	return 0;
> +	return i2c_bus_speed[i2c_bus_num];
>  }
> +
>  #endif /* CONFIG_HARD_I2C */
>  #endif /* CONFIG_FSL_I2C */

Industrie Dial Face S.p.A.
Luigi Mantellini
R&D - Software
Industrie Dial Face S.p.A.
Via Canzo, 4 
20068 Peschiera Borromeo (MI), Italy
Tel.:   +39 02 5167 2813
Fax:    +39 02 5167 2459
E-mail: luigi.mantellini at idf-hit.com
GPG fingerprint: 3DD1 7B71 FBDF 6376
1B4A
                 B003 175F E979 907E
1650
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080327/e4fdf5d8/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: idf_logo.gif
Type: image/gif
Size: 4122 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20080327/e4fdf5d8/attachment.gif 


More information about the U-Boot mailing list