[U-Boot-Users] [PATCH v2 4/7] add SMSC LAN9x1x Network driver

[Nick Droogh]

Hi Everyone,

Would this driver work with the LAN9218 chip as well?

Nick

Ben Warren wrote:
> Thanks Sascha,
>
> Sascha Hauer wrote:
>   
>> On Thu, Mar 27, 2008 at 10:39:38AM -0000, Peter Pearse wrote:
>>   
>>     
>>>> -----Original Message-----
>>>> From: Ben Warren [mailto:biggerbadderben at gmail.com] 
>>>> Sent: 26 March 2008 20:08
>>>> To: Guennadi Liakhovetski
>>>> Cc: u-boot-users at lists.sourceforge.net; Wolfgang Denk; Peter Pearse
>>>> Subject: Re: [U-Boot-Users] [PATCH v2 4/7] add SMSC LAN9x1x 
>>>> Network driver
>>>>
>>>> Hi Guennadi,
>>>>
>>>> Guennadi Liakhovetski wrote:
>>>>       
>>>>         
>>>>> From: Sascha Hauer <s.hauer at pengutronix.de>
>>>>>
>>>>> This patch adds a driver for the following smsc network controllers:
>>>>> LAN9115
>>>>> LAN9116
>>>>> LAN9117
>>>>> LAN9215
>>>>> LAN9216
>>>>> LAN9217
>>>>>
>>>>>   
>>>>>         
>>>>>           
>>>> How many of these have been tested, and on what platforms.  
>>>> I'm asking because the code seems to assume a 32-bit 
>>>> interface and these aren't all 32-bit chips.
>>>>       
>>>>         
>>> Comments please Sascha.
>>>     
>>>       
>> It's tested on the LAN9217 but I remember using it on one of the 16bit
>> controllers as well, maybe with some register access adjustments. Maybe
>> it's best to abstract the register accesses because I already had a
>> board which had the address lines shifted (somehow SMSC seems to provoke
>> this)
>>
>> Sascha
>>
>>   
>>     
> I have no issue with bringing this in as a 32-bit only driver, leaving 
> 16-bit implementation as a future exercise.  We really should do this 
> right, and the amount of code in the driver is small, so hopefully it 
> can be fixed up for this merge window.  If either you or Guennadi can do 
> the following, I'll try my best to keep up:
>
> 1. Change all register definitions as following:
>     #define RX_DATA_FIFO   __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00)
>        to
>     #define RX_DATA_FIFO   CONFIG_DRIVER_SMC911X_BASE + 0x00
>
> 2.  Implement read/write methods
>     #ifdef CONFIG_DRIVER_SMC911X_32_BIT
>     static inline u32 reg_read(u32 addr) ...
>     static inline void reg_write(u32 addr, u32 val) ...
>     #else
>     #error "SMC911X: Only 32-bit bus is supported"
>     #endif
>
>     or use macros if you insist.  I won't get religious on this, just 
> make it readable and debuggable.
>
>
> thanks,
> Ben
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
>   

-------------- next part --------------
A non-text attachment was scrubbed...
Name: ndroogh.vcf
Type: text/x-vcard
Size: 220 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20080327/41e2aa2f/attachment.vcf