[U-Boot-Users] [PATCH 2/13] SPARC: Added SPARC board information to bdinfo command

[Daniel Hellstrom]

Hello Wolfgang,

This patch adds support for the U-Boot command 'bdinfo' for SPARC boards,
the output is as shown below.

######################
U-Boot 1.3.2-00273-gf85e20a (Mar 28 2008 - 13:13:48)GAISLER LEON3 
GR-XC3S-1500

CPU: LEON3
Board: GRSIM/TSIM
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   GRETH 10/100

Type "run flash_nfs" to mount root filesystem over NFS

Hit any key to stop autoboot:  0
=> bdinfo
memstart               = 0x40000000
memsize                = 0x04000000
flashstart             = 0x00000000
CFG_MONITOR_BASE       = 0x00000000
CFG_ENV_ADDR           = 0x007F8000
CFG_RELOC_MONITOR_BASE = 0x43f8e000 (262144)
CFG_MALLOC_BASE        = 0x43fce000 (131072)
CFG_INIT_SP_OFFSET     = 0x43ffdfe0 (65504)
CFG_PROM_OFFSET        = 0x43ffe000 (8064)
CFG_GBL_DATA_OFFSET    = 0x43ffff80 (128)
ethaddr                = 00:00:7A:CC:00:12
IP addr                = 192.168.0.80
baudrate               =  38400 bps
=>
######################

This patch is also available at 
ftp://ftp.gaisler.com/gaisler.com/u-boot/patches.

Best Regards,
Daniel Hellstrom




 common/cmd_bdinfo.c |   39 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 39 insertions(+), 0 deletions(-)


diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index bbb0192..731c1d2 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -208,6 +208,45 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int 
argc, char *argv[])
     return 0;
 }
 
+#elif defined(CONFIG_SPARC)    /* SPARC */
+int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+    bd_t *bd = gd->bd;
+#if defined(CONFIG_CMD_NET)
+    int i;
+#endif
+
+#ifdef DEBUG
+    print_num("bd address             ", (ulong) bd);
+#endif
+    print_num("memstart               ", bd->bi_memstart);
+    print_num("memsize                ", bd->bi_memsize);
+    print_num("flashstart             ", bd->bi_flashstart);
+    print_num("CFG_MONITOR_BASE       ", CFG_MONITOR_BASE);
+    print_num("CFG_ENV_ADDR           ", CFG_ENV_ADDR);
+    printf("CFG_RELOC_MONITOR_BASE = 0x%lx (%d)\n", CFG_RELOC_MONITOR_BASE,
+           CFG_MONITOR_LEN);
+    printf("CFG_MALLOC_BASE        = 0x%lx (%d)\n", CFG_MALLOC_BASE,
+           CFG_MALLOC_LEN);
+    printf("CFG_INIT_SP_OFFSET     = 0x%lx (%d)\n", CFG_INIT_SP_OFFSET,
+           CFG_STACK_SIZE);
+    printf("CFG_PROM_OFFSET        = 0x%lx (%d)\n", CFG_PROM_OFFSET,
+           CFG_PROM_SIZE);
+    printf("CFG_GBL_DATA_OFFSET    = 0x%lx (%d)\n", CFG_GBL_DATA_OFFSET,
+           CFG_GBL_DATA_SIZE);
+
+#if defined(CONFIG_CMD_NET)
+    puts("ethaddr                =");
+    for (i = 0; i < 6; ++i) {
+        printf("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
+    }
+    puts("\nIP addr                = ");
+    print_IPaddr(bd->bi_ip_addr);
+#endif
+    printf("\nbaudrate               = %6ld bps\n", bd->bi_baudrate);
+    return 0;
+}
+
 #elif defined(CONFIG_M68K) /* M68K */
 static void print_str(const char *, const char *);