[U-Boot-Users] [PATCH 07/13] SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
Daniel Hellstrom
daniel at gaisler.com
Fri Mar 28 20:22:53 CET 2008
Hello Wolfgang,
GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
a debug link (EDCL). The GRETH core is documented in GRIP.pdf
available at www.gaisler.com.
If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
offloading etc.) can be determined by a bit in the control register.
The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
This patch is also available at ftp://ftp.gaisler.com/gaisler.com/u-boot/patches.
Best Regards,
Daniel Hellstrom
Signed-off-by: Daniel Hellstrom <daniel at gaisler.com>
---
drivers/net/Makefile | 1 +
drivers/net/greth.c | 661 ++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/greth.h | 97 ++++++++
net/eth.c | 4 +
4 files changed, 763 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/greth.c
create mode 100644 drivers/net/greth.h
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 320dc3e..eafd267 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -35,6 +35,7 @@ COBJS-y += e1000.o
COBJS-y += eepro100.o
COBJS-y += enc28j60.o
COBJS-y += fsl_mcdmafec.o
+COBJS-$(CONFIG_GRETH) += greth.o
COBJS-y += inca-ip_sw.o
COBJS-y += ks8695eth.o
COBJS-y += lan91c96.o
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
new file mode 100644
index 0000000..76ece59
--- /dev/null
+++ b/drivers/net/greth.c
@@ -0,0 +1,661 @@
+/* Gaisler.com GRETH 10/100/1000 Ethernet MAC driver
+ *
+ * Driver use polling mode (no Interrupt)
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <ambapp.h>
+#include <asm/leon.h>
+
+/* #define DEBUG */
+
+#include "greth.h"
+
+/* Default to 3s timeout on autonegotiation */
+#ifndef GRETH_PHY_TIMEOUT_MS
+#define GRETH_PHY_TIMEOUT_MS 3000
+#endif
+
+/* ByPass Cache when reading regs */
+#define GRETH_REGLOAD(addr) SPARC_NOCACHE_READ(addr)
+/* Write-through cache ==> no bypassing needed on writes */
+#define GRETH_REGSAVE(addr,data) (*(unsigned int *)(addr) = (data))
+#define GRETH_REGORIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)|data)
+#define GRETH_REGANDIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)&data)
+
+#define GRETH_RXBD_CNT 4
+#define GRETH_TXBD_CNT 1
+
+#define GRETH_RXBUF_SIZE 1540
+#define GRETH_BUF_ALIGN 4
+#define GRETH_RXBUF_EFF_SIZE \
+ ( (GRETH_RXBUF_SIZE&~(GRETH_BUF_ALIGN-1))+GRETH_BUF_ALIGN )
+
+typedef struct {
+ greth_regs *regs;
+ int irq;
+ struct eth_device *dev;
+
+ /* Hardware info */
+ unsigned char phyaddr;
+ int gbit_mac;
+
+ /* Current operating Mode */
+ int gb; /* GigaBit */
+ int fd; /* Full Duplex */
+ int sp; /* 10/100Mbps speed (1=100,0=10) */
+ int auto_neg; /* Auto negotiate done */
+
+ unsigned char hwaddr[6]; /* MAC Address */
+
+ /* Descriptors */
+ greth_bd *rxbd_base, *rxbd_max;
+ greth_bd *txbd_base, *txbd_max;
+
+ greth_bd *rxbd_curr;
+
+ /* rx buffers in rx descriptors */
+ void *rxbuf_base; /* (GRETH_RXBUF_SIZE+ALIGNBYTES) * GRETH_RXBD_CNT */
+
+ /* unused for gbit_mac, temp buffer for sending packets with unligned
+ * start.
+ * Pointer to packet allocated with malloc.
+ */
+ void *txbuf;
+
+ struct {
+ /* rx status */
+ unsigned int rx_packets,
+ rx_crc_errors, rx_frame_errors, rx_length_errors, rx_errors;
+
+ /* tx stats */
+ unsigned int tx_packets,
+ tx_latecol_errors,
+ tx_underrun_errors, tx_limit_errors, tx_errors;
+ } stats;
+} greth_priv;
+
+/* Read MII register 'addr' from core 'regs' */
+static int read_mii(int addr, volatile greth_regs * regs)
+{
+ while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
+ }
+
+ GRETH_REGSAVE(®s->mdio, (0 << 11) | ((addr & 0x1F) << 6) | 2);
+
+ while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
+ }
+
+ if (!(GRETH_REGLOAD(®s->mdio) & GRETH_MII_NVALID)) {
+ return (GRETH_REGLOAD(®s->mdio) >> 16) & 0xFFFF;
+ } else {
+ return -1;
+ }
+}
+
+static void write_mii(int addr, int data, volatile greth_regs * regs)
+{
+ while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
+ }
+
+ GRETH_REGSAVE(®s->mdio,
+ ((data & 0xFFFF) << 16) | (0 << 11) | ((addr & 0x1F) << 6)
+ | 1);
+
+ while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
+ }
+
+}
+
+/* init/start hardware and allocate descriptor buffers for rx side
+ *
+ */
+int greth_init(struct eth_device *dev, bd_t * bis)
+{
+ int i;
+
+ greth_priv *greth = dev->priv;
+ greth_regs *regs = greth->regs;
+#ifdef DEBUG
+ printf("greth_init\n");
+#endif
+
+ GRETH_REGSAVE(®s->control, 0);
+
+ if (!greth->rxbd_base) {
+
+ /* allocate descriptors */
+ greth->rxbd_base = (greth_bd *)
+ memalign(0x1000, GRETH_RXBD_CNT * sizeof(greth_bd));
+ greth->txbd_base = (greth_bd *)
+ memalign(0x1000, GRETH_RXBD_CNT * sizeof(greth_bd));
+
+ /* allocate buffers to all descriptors */
+ greth->rxbuf_base =
+ malloc(GRETH_RXBUF_EFF_SIZE * GRETH_RXBD_CNT);
+ }
+
+ /* initate rx decriptors */
+ for (i = 0; i < GRETH_RXBD_CNT; i++) {
+ greth->rxbd_base[i].addr = (unsigned int)
+ greth->rxbuf_base + (GRETH_RXBUF_EFF_SIZE * i);
+ /* enable desciptor & set wrap bit if last descriptor */
+ if (i >= (GRETH_RXBD_CNT - 1)) {
+ greth->rxbd_base[i].stat = GRETH_BD_EN | GRETH_BD_WR;
+ } else {
+ greth->rxbd_base[i].stat = GRETH_BD_EN;
+ }
+ }
+
+ /* initiate indexes */
+ greth->rxbd_curr = greth->rxbd_base;
+ greth->rxbd_max = greth->rxbd_base + (GRETH_RXBD_CNT - 1);
+ greth->txbd_max = greth->txbd_base + (GRETH_TXBD_CNT - 1);
+ /*
+ * greth->txbd_base->addr = 0;
+ * greth->txbd_base->stat = GRETH_BD_WR;
+ */
+
+ /* initate tx decriptors */
+ for (i = 0; i < GRETH_TXBD_CNT; i++) {
+ greth->txbd_base[i].addr = 0;
+ /* enable desciptor & set wrap bit if last descriptor */
+ if (i >= (GRETH_RXBD_CNT - 1)) {
+ greth->txbd_base[i].stat = GRETH_BD_WR;
+ } else {
+ greth->txbd_base[i].stat = 0;
+ }
+ }
+
+ /**** SET HARDWARE REGS ****/
+
+ /* Set pointer to tx/rx descriptor areas */
+ GRETH_REGSAVE(®s->rx_desc_p, (unsigned int)&greth->rxbd_base[0]);
+ GRETH_REGSAVE(®s->tx_desc_p, (unsigned int)&greth->txbd_base[0]);
+
+ /* Enable Transmitter, GRETH will now scan descriptors for packets
+ * to transmitt */
+#ifdef DEBUG
+ printf("greth_init: enabling receiver\n");
+#endif
+ GRETH_REGORIN(®s->control, GRETH_RXEN);
+
+ return 0;
+}
+
+/* Initiate PHY to a relevant speed
+ * return:
+ * - 0 = success
+ * - 1 = timeout/fail
+ */
+int greth_init_phy(greth_priv * dev, bd_t * bis)
+{
+ greth_regs *regs = dev->regs;
+ int tmp, tmp1, tmp2, i;
+ unsigned int start, timeout;
+
+ /* X msecs to ticks */
+ timeout = usec2ticks(GRETH_PHY_TIMEOUT_MS * 1000);
+
+ /* Get system timer0 current value
+ * Total timeout is 5s
+ */
+ start = get_timer(0);
+
+ /* get phy control register default values */
+
+ while ((tmp = read_mii(0, regs)) & 0x8000) {
+ if (get_timer(start) > timeout)
+ return 1; /* Fail */
+ }
+
+ /* reset PHY and wait for completion */
+ write_mii(0, 0x8000 | tmp, regs);
+
+ while (((tmp = read_mii(0, regs))) & 0x8000) {
+ if (get_timer(start) > timeout)
+ return 1; /* Fail */
+ }
+
+ /* Check if PHY is autoneg capable and then determine operating
+ * mode, otherwise force it to 10 Mbit halfduplex
+ */
+ dev->gb = 0;
+ dev->fd = 0;
+ dev->sp = 0;
+ dev->auto_neg = 0;
+ if (!((tmp >> 12) & 1)) {
+ write_mii(0, 0, regs);
+ } else {
+ /* wait for auto negotiation to complete and then check operating mode */
+ dev->auto_neg = 1;
+ i = 0;
+ while (!(((tmp = read_mii(1, regs)) >> 5) & 1)) {
+ if (get_timer(start) > timeout) {
+ printf("Auto negotiation timed out. "
+ "Selecting default config\n");
+ tmp = read_mii(0, regs);
+ dev->gb = ((tmp >> 6) & 1)
+ && !((tmp >> 13) & 1);
+ dev->sp = !((tmp >> 6) & 1)
+ && ((tmp >> 13) & 1);
+ dev->fd = (tmp >> 8) & 1;
+ goto auto_neg_done;
+ }
+ }
+ if ((tmp >> 8) & 1) {
+ tmp1 = read_mii(9, regs);
+ tmp2 = read_mii(10, regs);
+ if ((tmp1 & GRETH_MII_EXTADV_1000FD) &&
+ (tmp2 & GRETH_MII_EXTPRT_1000FD)) {
+ dev->gb = 1;
+ dev->fd = 1;
+ }
+ if ((tmp1 & GRETH_MII_EXTADV_1000HD) &&
+ (tmp2 & GRETH_MII_EXTPRT_1000HD)) {
+ dev->gb = 1;
+ dev->fd = 0;
+ }
+ }
+ if ((dev->gb == 0) || ((dev->gb == 1) && (dev->gbit_mac == 0))) {
+ tmp1 = read_mii(4, regs);
+ tmp2 = read_mii(5, regs);
+ if ((tmp1 & GRETH_MII_100TXFD) &&
+ (tmp2 & GRETH_MII_100TXFD)) {
+ dev->sp = 1;
+ dev->fd = 1;
+ }
+ if ((tmp1 & GRETH_MII_100TXHD) &&
+ (tmp2 & GRETH_MII_100TXHD)) {
+ dev->sp = 1;
+ dev->fd = 0;
+ }
+ if ((tmp1 & GRETH_MII_10FD) && (tmp2 & GRETH_MII_10FD)) {
+ dev->fd = 1;
+ }
+ if ((dev->gb == 1) && (dev->gbit_mac == 0)) {
+ dev->gb = 0;
+ dev->fd = 0;
+ write_mii(0, dev->sp << 13, regs);
+ }
+ }
+
+ }
+ auto_neg_done:
+#ifdef DEBUG
+ printf("%s GRETH Ethermac at [0x%x] irq %d. Running \
+ %d Mbps %s duplex\n", dev->gbit_mac ? "10/100/1000" : "10/100", (unsigned int)(regs), (unsigned int)(dev->irq), dev->gb ? 1000 : (dev->sp ? 100 : 10), dev->fd ? "full" : "half");
+#endif
+ /* Read out PHY info if extended registers are available */
+ if (tmp & 1) {
+ tmp1 = read_mii(2, regs);
+ tmp2 = read_mii(3, regs);
+ tmp1 = (tmp1 << 6) | ((tmp2 >> 10) & 0x3F);
+ tmp = tmp2 & 0xF;
+
+ tmp2 = (tmp2 >> 4) & 0x3F;
+#ifdef DEBUG
+ printf("PHY: Vendor %x Device %x Revision %d\n", tmp1,
+ tmp2, tmp);
+#endif
+ } else {
+ printf("PHY info not available\n");
+ }
+
+ /* set speed and duplex bits in control register */
+ GRETH_REGORIN(®s->control,
+ (dev->gb << 8) | (dev->sp << 7) | (dev->fd << 4));
+
+ return 0;
+}
+
+void greth_halt(struct eth_device *dev)
+{
+ greth_priv *greth;
+ greth_regs *regs;
+ int i;
+#ifdef DEBUG
+ printf("greth_halt\n");
+#endif
+ if (!dev || !dev->priv)
+ return;
+
+ greth = dev->priv;
+ regs = greth->regs;
+
+ if (!regs)
+ return;
+
+ /* disable receiver/transmitter by clearing the enable bits */
+ GRETH_REGANDIN(®s->control, ~(GRETH_RXEN | GRETH_TXEN));
+
+ /* reset rx/tx descriptors */
+ if (greth->rxbd_base) {
+ for (i = 0; i < GRETH_RXBD_CNT; i++) {
+ greth->rxbd_base[i].stat =
+ (i >= (GRETH_RXBD_CNT - 1)) ? GRETH_BD_WR : 0;
+ }
+ }
+
+ if (greth->txbd_base) {
+ for (i = 0; i < GRETH_TXBD_CNT; i++) {
+ greth->txbd_base[i].stat =
+ (i >= (GRETH_TXBD_CNT - 1)) ? GRETH_BD_WR : 0;
+ }
+ }
+}
+
+int greth_send(struct eth_device *dev, volatile void *eth_data, int data_length)
+{
+ greth_priv *greth = dev->priv;
+ greth_regs *regs = greth->regs;
+ greth_bd *txbd;
+ void *txbuf;
+ unsigned int status;
+#ifdef DEBUG
+ printf("greth_send\n");
+#endif
+ /* send data, wait for data to be sent, then return */
+ if (((unsigned int)eth_data & (GRETH_BUF_ALIGN - 1))
+ && !greth->gbit_mac) {
+ /* data not aligned as needed by GRETH 10/100, solve this by allocating 4 byte aligned buffer
+ * and copy data to before giving it to GRETH.
+ */
+ if (!greth->txbuf) {
+ greth->txbuf = malloc(GRETH_RXBUF_SIZE);
+#ifdef DEBUG
+ printf("GRETH: allocated aligned tx-buf\n");
+#endif
+ }
+
+ txbuf = greth->txbuf;
+
+ /* copy data info buffer */
+ memcpy((char *)txbuf, (char *)eth_data, data_length);
+
+ /* keep buffer to next time */
+ } else {
+ txbuf = (void *)eth_data;
+ }
+ /* get descriptor to use, only 1 supported... hehe easy */
+ txbd = greth->txbd_base;
+
+ /* setup descriptor to wrap around to it self */
+ txbd->addr = (unsigned int)txbuf;
+ txbd->stat = GRETH_BD_EN | GRETH_BD_WR | data_length;
+
+ /* Remind Core which descriptor to use when sending */
+ GRETH_REGSAVE(®s->tx_desc_p, (unsigned int)txbd);
+
+ /* initate send by enabling transmitter */
+ GRETH_REGORIN(®s->control, GRETH_TXEN);
+
+ /* Wait for data to be sent */
+ while ((status = GRETH_REGLOAD(&txbd->stat)) & GRETH_BD_EN) {
+ ;
+ }
+
+ /* was the packet transmitted succesfully? */
+ if (status & GRETH_TXBD_ERR_AL) {
+ greth->stats.tx_limit_errors++;
+ }
+
+ if (status & GRETH_TXBD_ERR_UE) {
+ greth->stats.tx_underrun_errors++;
+ }
+
+ if (status & GRETH_TXBD_ERR_LC) {
+ greth->stats.tx_latecol_errors++;
+ }
+
+ if (status &
+ (GRETH_TXBD_ERR_LC | GRETH_TXBD_ERR_UE | GRETH_TXBD_ERR_AL)) {
+ /* any error */
+ greth->stats.tx_errors++;
+ return -1;
+ }
+
+ /* bump tx packet counter */
+ greth->stats.tx_packets++;
+
+ /* return succefully */
+ return 0;
+}
+
+int greth_recv(struct eth_device *dev)
+{
+ greth_priv *greth = dev->priv;
+ greth_regs *regs = greth->regs;
+ greth_bd *rxbd;
+ unsigned int status, len = 0, bad;
+ unsigned char *d;
+ int enable = 0;
+ int i;
+#ifdef DEBUG
+/* printf("greth_recv\n"); */
+#endif
+ /* Receive One packet only, but clear as many error packets as there are
+ * available.
+ */
+ {
+ /* current receive descriptor */
+ rxbd = greth->rxbd_curr;
+
+ /* get status of next received packet */
+ status = GRETH_REGLOAD(&rxbd->stat);
+
+ bad = 0;
+
+ /* stop if no more packets received */
+ if (status & GRETH_BD_EN) {
+ goto done;
+ }
+#ifdef DEBUG
+ printf("greth_recv: packet 0x%lx, 0x%lx, len: %d\n",
+ (unsigned int)rxbd, status, status & GRETH_BD_LEN);
+#endif
+
+ /* Check status for errors.
+ */
+ if (status & GRETH_RXBD_ERR_FT) {
+ greth->stats.rx_length_errors++;
+ bad = 1;
+ }
+ if (status & (GRETH_RXBD_ERR_AE | GRETH_RXBD_ERR_OE)) {
+ greth->stats.rx_frame_errors++;
+ bad = 1;
+ }
+ if (status & GRETH_RXBD_ERR_CRC) {
+ greth->stats.rx_crc_errors++;
+ bad = 1;
+ }
+ if (bad) {
+ greth->stats.rx_errors++;
+ printf
+ ("greth_recv: Bad packet (%d, %d, %d, 0x%08x, %d)\n",
+ greth->stats.rx_length_errors,
+ greth->stats.rx_frame_errors,
+ greth->stats.rx_crc_errors, status,
+ greth->stats.rx_packets);
+ /* print all rx descriptors */
+ for (i = 0; i < GRETH_RXBD_CNT; i++) {
+ printf("[%d]: Stat=0x%lx, Addr=0x%lx\n", i,
+ GRETH_REGLOAD(&greth->rxbd_base[i].stat),
+ GRETH_REGLOAD(&greth->rxbd_base[i].
+ addr));
+ }
+ } else {
+ /* Process the incoming packet. */
+ len = status & GRETH_BD_LEN;
+ d = (char *)rxbd->addr;
+#ifdef DEBUG
+ printf
+ ("greth_recv: new packet, length: %d. data: %x %x %x %x %x %x %x %x\n",
+ len, d[0], d[1], d[2], d[3], d[4], d[5], d[6],
+ d[7]);
+#endif
+ /* flush all data cache to make sure we're not reading old packet data */
+ sparc_dcache_flush_all();
+
+ /* pass packet on to network subsystem */
+ NetReceive((void *)d, len);
+
+ /* bump stats counters */
+ greth->stats.rx_packets++;
+
+ /* bad is now 0 ==> will stop loop */
+ }
+
+ /* reenable descriptor to receive more packet with this descriptor, wrap around if needed */
+ rxbd->stat =
+ GRETH_BD_EN |
+ (((unsigned int)greth->rxbd_curr >=
+ (unsigned int)greth->rxbd_max) ? GRETH_BD_WR : 0);
+ enable = 1;
+
+ /* increase index */
+ greth->rxbd_curr =
+ ((unsigned int)greth->rxbd_curr >=
+ (unsigned int)greth->rxbd_max) ? greth->
+ rxbd_base : (greth->rxbd_curr + 1);
+
+ };
+
+ if (enable) {
+ GRETH_REGORIN(®s->control, GRETH_RXEN);
+ }
+ done:
+ /* return positive length of packet or 0 if non recieved */
+ return len;
+}
+
+void greth_set_hwaddr(greth_priv * greth, unsigned char *mac)
+{
+ /* save new MAC address */
+ greth->dev->enetaddr[0] = greth->hwaddr[0] = mac[0];
+ greth->dev->enetaddr[1] = greth->hwaddr[1] = mac[1];
+ greth->dev->enetaddr[2] = greth->hwaddr[2] = mac[2];
+ greth->dev->enetaddr[3] = greth->hwaddr[3] = mac[3];
+ greth->dev->enetaddr[4] = greth->hwaddr[4] = mac[4];
+ greth->dev->enetaddr[5] = greth->hwaddr[5] = mac[5];
+ greth->regs->esa_msb = (mac[0] << 8) | mac[1];
+ greth->regs->esa_lsb =
+ (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5];
+#ifdef DEBUG
+ printf("GRETH: New MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+#endif
+}
+
+int greth_initialize(bd_t * bis)
+{
+ greth_priv *greth;
+ ambapp_apbdev apbdev;
+ struct eth_device *dev;
+ int i;
+ char *addr_str, *end;
+ unsigned char addr[6];
+#ifdef DEBUG
+ printf("Scanning for GRETH\n");
+#endif
+ /* Find Device & IRQ via AMBA Plug&Play information */
+ if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_ETHMAC, &apbdev) != 1) {
+ return -1; /* GRETH not found */
+ }
+
+ greth = (greth_priv *) malloc(sizeof(greth_priv));
+ dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+ memset(dev, 0, sizeof(struct eth_device));
+ memset(greth, 0, sizeof(greth_priv));
+
+ greth->regs = (greth_regs *) apbdev.address;
+ greth->irq = apbdev.irq;
+#ifdef DEBUG
+ printf("Found GRETH at 0x%lx, irq %d\n", greth->regs, greth->irq);
+#endif
+ dev->priv = (void *)greth;
+ dev->iobase = (unsigned int)greth->regs;
+ dev->init = greth_init;
+ dev->halt = greth_halt;
+ dev->send = greth_send;
+ dev->recv = greth_recv;
+ greth->dev = dev;
+
+ /* Reset Core */
+ GRETH_REGSAVE(&greth->regs->control, GRETH_RESET);
+
+ /* Wait for core to finish reset cycle */
+ while (GRETH_REGLOAD(&greth->regs->control) & GRETH_RESET) ;
+
+ /* Get the phy address which assumed to have been set
+ correctly with the reset value in hardware */
+ greth->phyaddr = (GRETH_REGLOAD(&greth->regs->mdio) >> 11) & 0x1F;
+
+ /* Check if mac is gigabit capable */
+ greth->gbit_mac = (GRETH_REGLOAD(&greth->regs->control) >> 27) & 1;
+
+ /* Make descriptor string */
+ if (greth->gbit_mac) {
+ sprintf(dev->name, "GRETH 10/100/GB");
+ } else {
+ sprintf(dev->name, "GRETH 10/100");
+ }
+
+ /* initiate PHY, select speed/duplex depending on connected PHY */
+ if (greth_init_phy(greth, bis)) {
+ /* Failed to init PHY (timedout) */
+ return -1;
+ }
+
+ /* Register Device to EtherNet subsystem */
+ eth_register(dev);
+
+ /* Get MAC address */
+ if ((addr_str = getenv("ethaddr")) != NULL) {
+ for (i = 0; i < 6; i++) {
+ addr[i] =
+ addr_str ? simple_strtoul(addr_str, &end, 16) : 0;
+ if (addr_str) {
+ addr_str = (*end) ? end + 1 : end;
+ }
+ }
+ } else {
+ /* HW Address not found in environment, Set default HW address */
+ addr[0] = GRETH_HWADDR_0; /* MSB */
+ addr[1] = GRETH_HWADDR_1;
+ addr[2] = GRETH_HWADDR_2;
+ addr[3] = GRETH_HWADDR_3;
+ addr[4] = GRETH_HWADDR_4;
+ addr[5] = GRETH_HWADDR_5; /* LSB */
+ }
+
+ /* set and remember MAC address */
+ greth_set_hwaddr(greth, addr);
+
+ return 1;
+}
diff --git a/drivers/net/greth.h b/drivers/net/greth.h
new file mode 100644
index 0000000..7d5fbd3
--- /dev/null
+++ b/drivers/net/greth.h
@@ -0,0 +1,97 @@
+/* Gaisler.com GRETH 10/100/1000 Ethernet MAC driver
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define GRETH_FD 0x10
+#define GRETH_RESET 0x40
+#define GRETH_MII_BUSY 0x8
+#define GRETH_MII_NVALID 0x10
+
+/* MII registers */
+#define GRETH_MII_EXTADV_1000FD 0x00000200
+#define GRETH_MII_EXTADV_1000HD 0x00000100
+#define GRETH_MII_EXTPRT_1000FD 0x00000800
+#define GRETH_MII_EXTPRT_1000HD 0x00000400
+
+#define GRETH_MII_100T4 0x00000200
+#define GRETH_MII_100TXFD 0x00000100
+#define GRETH_MII_100TXHD 0x00000080
+#define GRETH_MII_10FD 0x00000040
+#define GRETH_MII_10HD 0x00000020
+
+#define GRETH_BD_EN 0x800
+#define GRETH_BD_WR 0x1000
+#define GRETH_BD_IE 0x2000
+#define GRETH_BD_LEN 0x7FF
+
+#define GRETH_TXEN 0x1
+#define GRETH_INT_TX 0x8
+#define GRETH_TXI 0x4
+#define GRETH_TXBD_STATUS 0x0001C000
+#define GRETH_TXBD_MORE 0x20000
+#define GRETH_TXBD_IPCS 0x40000
+#define GRETH_TXBD_TCPCS 0x80000
+#define GRETH_TXBD_UDPCS 0x100000
+#define GRETH_TXBD_ERR_LC 0x10000
+#define GRETH_TXBD_ERR_UE 0x4000
+#define GRETH_TXBD_ERR_AL 0x8000
+#define GRETH_TXBD_NUM 128
+#define GRETH_TXBD_NUM_MASK (GRETH_TXBD_NUM-1)
+#define GRETH_TX_BUF_SIZE 2048
+
+#define GRETH_INT_RX 0x4
+#define GRETH_RXEN 0x2
+#define GRETH_RXI 0x8
+#define GRETH_RXBD_STATUS 0xFFFFC000
+#define GRETH_RXBD_ERR_AE 0x4000
+#define GRETH_RXBD_ERR_FT 0x8000
+#define GRETH_RXBD_ERR_CRC 0x10000
+#define GRETH_RXBD_ERR_OE 0x20000
+#define GRETH_RXBD_ERR_LE 0x40000
+#define GRETH_RXBD_IP_DEC 0x80000
+#define GRETH_RXBD_IP_CSERR 0x100000
+#define GRETH_RXBD_UDP_DEC 0x200000
+#define GRETH_RXBD_UDP_CSERR 0x400000
+#define GRETH_RXBD_TCP_DEC 0x800000
+#define GRETH_RXBD_TCP_CSERR 0x1000000
+
+#define GRETH_RXBD_NUM 128
+#define GRETH_RXBD_NUM_MASK (GRETH_RXBD_NUM-1)
+#define GRETH_RX_BUF_SIZE 2048
+
+/* Ethernet configuration registers */
+typedef struct _greth_regs {
+ volatile unsigned int control;
+ volatile unsigned int status;
+ volatile unsigned int esa_msb;
+ volatile unsigned int esa_lsb;
+ volatile unsigned int mdio;
+ volatile unsigned int tx_desc_p;
+ volatile unsigned int rx_desc_p;
+} greth_regs;
+
+/* Ethernet buffer descriptor */
+typedef struct _greth_bd {
+ volatile unsigned int stat;
+ unsigned int addr; /* Buffer address not changed by HW */
+} greth_bd;
diff --git a/net/eth.c b/net/eth.c
index 16a6dcb..3b86f87 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -60,6 +60,7 @@ extern int npe_initialize(bd_t *);
extern int uec_initialize(int);
extern int bfin_EMAC_initialize(bd_t *);
extern int atstk1000_eth_initialize(bd_t *);
+extern int greth_initialize(bd_t *);
extern int atngw100_eth_initialize(bd_t *);
extern int mcffec_initialize(bd_t*);
extern int mcdmafec_initialize(bd_t*);
@@ -275,6 +276,9 @@ int eth_initialize(bd_t *bis)
#if defined(CONFIG_ATSTK1000)
atstk1000_eth_initialize(bis);
#endif
+#if defined(CONFIG_GRETH)
+ greth_initialize(bis);
+#endif
#if defined(CONFIG_ATNGW100)
atngw100_eth_initialize(bis);
#endif
--
1.5.4
More information about the U-Boot
mailing list