[U-Boot-Users] [PATCH] 4xx: Cleanup PMC440 board support
Matthias Fuchs
matthias.fuchs at esd-electronics.com
Sun Mar 30 18:52:44 CEST 2008
Signed-off-by: Matthias Fuchs <matthias.fuchs at esd-electronics.com>
---
board/esd/pmc440/cmd_pmc440.c | 53 +++++-----
board/esd/pmc440/pmc440.c | 227 +++++++++++++++++++----------------------
2 files changed, 132 insertions(+), 148 deletions(-)
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index 350af48..e9e9746 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Matthias Fuchs, esd Gmbh, matthias.fuchs at esd-electronics.com.
*
* See file CREDITS for list of people who contributed to this
@@ -21,7 +21,6 @@
* MA 02111-1307 USA
*
*/
-
#include <common.h>
#include <command.h>
#include <asm/io.h>
@@ -31,7 +30,8 @@
#include "pmc440.h"
int is_monarch(void);
-int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
+int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt);
int eeprom_write_enable(unsigned dev_addr, int state);
DECLARE_GLOBAL_DATA_PTR;
@@ -64,7 +64,6 @@ int fpga_interrupt(u32 arg)
return rc;
}
-
int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
@@ -100,7 +99,6 @@ U_BOOT_CMD(
NULL
);
-
void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
{
u32 ctrl;
@@ -117,7 +115,6 @@ void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
}
}
-
int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
@@ -200,7 +197,8 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
got_fifoirq = 0;
/* unmask global fifo irq */
FPGA_OUT32(&fpga->hostctrl,
- HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG);
+ HOSTCTRL_FIFOIE_GATE |
+ HOSTCTRL_FIFOIE_FLAG);
}
}
@@ -237,7 +235,8 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
for (i=0; i<n; i++)
FPGA_OUT32(&fpga->fifo[f].data, data);
} else {
- printf("writing %d x %08x to fifo port at address %08x\n",
+ printf("writing %d x %08x to fifo port at "
+ "address %08x\n",
n, data, f);
for (i=0; i<n; i++)
out32(f, data);
@@ -263,10 +262,10 @@ U_BOOT_CMD(
" - without arguments: print all fifo's status\n"
" - with 'wait' argument: interrupt driven read from all fifos\n"
" - with 'read' argument: read current contents from all fifos\n"
- " - with 'write' argument: write 'data' 'cnt' times to 'fifo' or 'address'\n"
+ " - with 'write' argument: write 'data' 'cnt' times to "
+ "'fifo' or 'address'\n"
);
-
int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong sdsdp[5];
@@ -301,10 +300,12 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
sdsdp[2]=0x40082350;
sdsdp[3]=0x0d050000;
} else if (!strcmp(argv[1], "test")) {
- /* TODO: this will replace the 667 MHz config above.
+ /*
+ * TODO: this will replace the 667 MHz config above.
* But it needs some more testing on a real 667 MHz CPU.
*/
- printf("Bootstrapping for test (667MHz PLB=133PLB PLB/PCI=3)\n");
+ printf("Bootstrapping for test"
+ " (667MHz PLB=133PLB PLB/PCI=3)\n");
sdsdp[0]=0x8778a256;
sdsdp[1]=0x095fa030;
sdsdp[2]=0x40082350;
@@ -347,7 +348,6 @@ U_BOOT_CMD(
"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
);
-
#if defined(CONFIG_PRAM)
#include <environment.h>
extern env_t *env_ptr;
@@ -394,7 +394,6 @@ U_BOOT_CMD(
);
#endif /* CONFIG_PRAM */
-
int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
if (argc > 1) {
@@ -423,7 +422,6 @@ U_BOOT_CMD(
NULL
);
-
int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
@@ -444,7 +442,8 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
/* deassert */
printf("PMC-RESETOUT# deasserted\n");
FPGA_OUT32(&fpga->hostctrl,
- HOSTCTRL_PMCRSTOUT_GATE | HOSTCTRL_PMCRSTOUT_FLAG);
+ HOSTCTRL_PMCRSTOUT_GATE |
+ HOSTCTRL_PMCRSTOUT_FLAG);
}
} else {
printf("PMC-RESETOUT# is %s\n",
@@ -460,7 +459,6 @@ U_BOOT_CMD(
NULL
);
-
int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
if (is_monarch()) {
@@ -481,7 +479,9 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE);
}
} else {
- printf("inta# is %s\n", in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ? "active" : "inactive");
+ printf("inta# is %s\n",
+ in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ?
+ "active" : "inactive");
}
return 0;
}
@@ -491,7 +491,6 @@ U_BOOT_CMD(
NULL
);
-
/* test-only */
int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -503,11 +502,17 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
pciaddr &= 0xf0000000;
/* map PCI address at 0xc0000000 in PLB space */
- out32r(PCIX0_PMM1MA, 0x00000000); /* PMM1 Mask/Attribute - disabled b4 setting */
- out32r(PCIX0_PMM1LA, 0xc0000000); /* PMM1 Local Address */
- out32r(PCIX0_PMM1PCILA, pciaddr); /* PMM1 PCI Low Address */
- out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM1 PCI High Address */
- out32r(PCIX0_PMM1MA, 0xf0000001); /* 256MB + No prefetching, and enable region */
+
+ /* PMM1 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1MA, 0x00000000);
+ /* PMM1 Local Address */
+ out32r(PCIX0_PMM1LA, 0xc0000000);
+ /* PMM1 PCI Low Address */
+ out32r(PCIX0_PMM1PCILA, pciaddr);
+ /* PMM1 PCI High Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000);
+ /* 256MB + No prefetching, and enable region */
+ out32r(PCIX0_PMM1MA, 0xf0000001);
} else {
printf("Usage:\npmm %s\n", cmdtp->help);
}
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index f1cfef2..7fadc42 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Matthias Fuchs, esd gmbh, matthias.fuchs at esd-electronics.com.
* Based on board/amcc/sequoia/sequoia.c
*
@@ -32,6 +32,7 @@
#include <ppc440.h>
#include <asm/processor.h>
#include <asm/io.h>
+#include <asm/bitops.h>
#include <command.h>
#include <i2c.h>
#ifdef CONFIG_RESET_PHY_R
@@ -43,12 +44,12 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
ulong flash_get_size(ulong base, int banknum);
int pci_is_66mhz(void);
-int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
-
+int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt);
struct serial_device *default_serial_console(void)
{
@@ -70,7 +71,8 @@ struct serial_device *default_serial_console(void)
/* mark scratchreg valid */
scratchreg = (scratchreg & 0xffffff00) | 0x80;
- i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR, 0x10, buf, 4);
+ i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR,
+ 0x10, buf, 4);
if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
scratchreg |= buf[2];
@@ -99,10 +101,10 @@ int board_early_init_f(void)
mtdcr(ebccfga, xbcfg);
mtdcr(ebccfgd, 0xf8400000);
- /*--------------------------------------------------------------------
+ /*
* Setup the GPIO pins
* TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file
- *-------------------------------------------------------------------*/
+ */
out32(GPIO0_OR, 0x40000002);
out32(GPIO0_TCR, 0x4c90011f);
out32(GPIO0_OSRL, 0x28011400);
@@ -141,9 +143,9 @@ int board_early_init_f(void)
mtspr(dbcr0, 0x20000000); /* do chip reset */
}
- /*--------------------------------------------------------------------
+ /*
* Setup the interrupt controller polarities, triggers, etc.
- *-------------------------------------------------------------------*/
+ */
mtdcr(uic0sr, 0xffffffff); /* clear all */
mtdcr(uic0er, 0x00000000); /* disable all */
mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
@@ -170,9 +172,11 @@ int board_early_init_f(void)
/* select Ethernet pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);
- sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
+ SDR0_PFC1_SELECT_CONFIG_4;
mfsdr(SDR0_PFC2, sdr0_pfc2);
- sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
+ sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
+ SDR0_PFC2_SELECT_CONFIG_4;
/* enable 2nd IIC */
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL;
@@ -192,9 +196,9 @@ int board_early_init_f(void)
return 0;
}
-/*---------------------------------------------------------------------------+
- | misc_init_r.
- +---------------------------------------------------------------------------*/
+/*
+ * misc_init_r.
+ */
int misc_init_r(void)
{
uint pbcr;
@@ -221,32 +225,7 @@ int misc_init_r(void)
mtdcr(ebccfga, pb0cr);
#endif
pbcr = mfdcr(ebccfgd);
- switch (gd->bd->bi_flashsize) {
- case 1 << 20:
- size_val = 0;
- break;
- case 2 << 20:
- size_val = 1;
- break;
- case 4 << 20:
- size_val = 2;
- break;
- case 8 << 20:
- size_val = 3;
- break;
- case 16 << 20:
- size_val = 4;
- break;
- case 32 << 20:
- size_val = 5;
- break;
- case 64 << 20:
- size_val = 6;
- break;
- case 128 << 20:
- size_val = 7;
- break;
- }
+ size_val = ffs(gd->bd->bi_flashsize) - 21;
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
mtdcr(ebccfga, pb2cr);
@@ -286,20 +265,22 @@ int misc_init_r(void)
mfsdr(SDR0_USB2H0CR, usb2h0cr);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
- /* An 8-bit/60MHz interface is the only possible alternative
- when connecting the Device to the PHY */
+ /*
+ * An 8-bit/60MHz interface is the only possible alternative
+ * when connecting the Device to the PHY
+ */
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
- usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
@@ -309,7 +290,7 @@ int misc_init_r(void)
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mtsdr(SDR0_USB2H0CR, usb2h0cr);
- /*clear resets*/
+ /* clear resets */
udelay(1000);
mtsdr(SDR0_SRST1, 0x00000000);
udelay(1000);
@@ -317,18 +298,18 @@ int misc_init_r(void)
printf("USB: Host\n");
- } else if ((strcmp(act, "dev") == 0) || (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
- /*-------------------PATCH-------------------------------*/
+ } else if ((strcmp(act, "dev") == 0) ||
+ (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
udelay (1000);
@@ -344,7 +325,6 @@ int misc_init_r(void)
udelay (1000);
mtsdr(SDR0_SRST1, 0x60306000);
- /*-------------------PATCH-------------------------------*/
/* SDR Setting */
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
@@ -353,23 +333,23 @@ int misc_init_r(void)
mfsdr(SDR0_PFC1, sdr0_pfc1);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
- usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
- sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
mtsdr(SDR0_USB2H0CR, usb2h0cr);
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
@@ -453,43 +433,42 @@ void pmc440_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
}
#endif
-/*************************************************************************
- * pci_pre_init
- *
- * This routine is called just prior to registering the hose and gives
- * the board the opportunity to check things. Returning a value of zero
- * indicates that things are bad & PCI initialization should be aborted.
+/*
+ * pci_pre_init
*
- * Different boards may wish to customize the pci controller structure
- * (add regions, override default access routines, etc) or perform
- * certain pre-initialization actions.
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
*
- ************************************************************************/
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ */
#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long addr;
- /*-------------------------------------------------------------------------+
- | Set priority for all PLB3 devices to 0.
- | Set PLB3 arbiter to fair mode.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set priority for all PLB3 devices to 0.
+ * Set PLB3 arbiter to fair mode.
+ */
mfsdr(sdr_amp1, addr);
mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb3_acr);
mtdcr(plb3_acr, addr | 0x80000000);
- /*-------------------------------------------------------------------------+
- | Set priority for all PLB4 devices to 0.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set priority for all PLB4 devices to 0.
+ */
mfsdr(sdr_amp0, addr);
mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
mtdcr(plb4_acr, addr);
- /*-------------------------------------------------------------------------+
- | Set Nebula PLB4 arbiter to fair mode.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set Nebula PLB4 arbiter to fair mode.
+ */
/* Segment0 */
addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
@@ -586,10 +565,10 @@ void pci_target_init(struct pci_controller *hose)
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
CFG_PCI_SUBSYS_VENDORID);
-#if 0 /* disabled for PMC405 backward compatibility */
+ /* disabled for PMC405 backward compatibility */
/* Configure command register as bus master */
- pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
-#endif
+ /* pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); */
+
/* 240nS PCI clock */
pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
@@ -621,20 +600,19 @@ void pci_target_init(struct pci_controller *hose)
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-/*************************************************************************
- * pci_master_init
- *
- ************************************************************************/
+/*
+ * pci_master_init
+ */
#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
- /*--------------------------------------------------------------------------+
- | Write the PowerPC440 EP PCI Configuration regs.
- | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
- | Enable PowerPC440 EP to act as a PCI memory target (PTM).
- +--------------------------------------------------------------------------*/
+ /*
+ * Write the PowerPC440 EP PCI Configuration regs.
+ * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ */
if (is_monarch()) {
pci_read_config_word(0, PCI_COMMAND, &temp_short);
pci_write_config_word(0, PCI_COMMAND,
@@ -644,7 +622,6 @@ void pci_master_init(struct pci_controller *hose)
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
-
static void wait_for_pci_ready(void)
{
int i;
@@ -671,22 +648,19 @@ static void wait_for_pci_ready(void)
}
}
-
-/*************************************************************************
- * is_pci_host
- *
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
+/*
+ * is_pci_host
*
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
*
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
*
- ************************************************************************/
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
#if defined(CONFIG_PCI)
int is_pci_host(struct pci_controller *hose)
{
@@ -703,6 +677,7 @@ int is_pci_host(struct pci_controller *hose)
return 0;
}
#endif /* defined(CONFIG_PCI) */
+
#if defined(CONFIG_POST)
/*
* Returns 1 if keys pressed to start the power-on long-running tests
@@ -714,7 +689,6 @@ int post_hotkeys_pressed(void)
}
#endif /* CONFIG_POST */
-
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
@@ -735,17 +709,19 @@ void reset_phy(void)
#endif
#if defined(CFG_EEPROM_WREN)
-/* Input: <dev_addr> I2C address of EEPROM device to enable.
- * <state> -1: deliver current state
+/*
+ * Input: <dev_addr> I2C address of EEPROM device to enable.
+ * <state> -1: deliver current state
* 0: disable write
* 1: enable write
- * Returns: -1: wrong device address
- * 0: dis-/en- able done
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
* 0/1: current state if <state> was -1.
*/
int eeprom_write_enable(unsigned dev_addr, int state)
{
- if ((CFG_I2C_EEPROM_ADDR != dev_addr) && (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
+ if ((CFG_I2C_EEPROM_ADDR != dev_addr) &&
+ (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
return -1;
} else {
switch (state) {
@@ -769,9 +745,9 @@ int eeprom_write_enable(unsigned dev_addr, int state)
}
#endif /* #if defined(CFG_EEPROM_WREN) */
-
#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
-int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt)
{
unsigned end = offset + cnt;
unsigned blk_off;
@@ -780,7 +756,8 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un
#if defined(CFG_EEPROM_WREN)
eeprom_write_enable(dev_addr, 1);
#endif
- /* Write data until done or would cross a write page boundary.
+ /*
+ * Write data until done or would cross a write page boundary.
* We must write the address again when changing pages
* because the address counter only increments within a page.
*/
@@ -802,7 +779,8 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un
#define BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
#define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
- maxlen = BOOT_EEPROM_PAGE_SIZE - BOOT_EEPROM_PAGE_OFFSET(blk_off);
+ maxlen = BOOT_EEPROM_PAGE_SIZE -
+ BOOT_EEPROM_PAGE_OFFSET(blk_off);
if (maxlen > I2C_RXTX_LEN)
maxlen = I2C_RXTX_LEN;
@@ -825,14 +803,15 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un
return rcode;
}
-
-int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt)
{
unsigned end = offset + cnt;
unsigned blk_off;
int rcode = 0;
- /* Read data until done or would cross a page boundary.
+ /*
+ * Read data until done or would cross a page boundary.
* We must write the address again when changing pages
* because the next page may be in a different device.
*/
@@ -866,7 +845,6 @@ int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, un
return rcode;
}
-
#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT)
int usb_board_init(void)
{
@@ -876,7 +854,8 @@ int usb_board_init(void)
if ((act == NULL || strcmp(act, "hostdev") == 0) &&
!(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT))
/* enable power on USB socket */
- out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
+ out_be32((void*)GPIO1_OR,
+ in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
for (i=0; i<1000; i++)
udelay(1000);
--
1.5.3
More information about the U-Boot
mailing list