[U-Boot-Users] [PATCH][resubmit] QE UEC: Add MII Commands

[David Saada]

Add MII commands to the UEC driver. Note that once a UEC device is selected,
any device on its MDIO bus can be addressed.

Signed-off-by: David Saada <david.saada at ecitele.com>

 uec.c |   53 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

--- a/drivers/qe/uec.c	2008-03-30 16:30:16.342061000 +0300
+++ b/drivers/qe/uec.c	2008-03-31 12:30:13.862288000 +0300
@@ -29,6 +29,7 @@
 #include "uccf.h"
 #include "uec.h"
 #include "uec_phy.h"
+#include "miiphy.h"
 
 #if defined(CONFIG_QE)
 
@@ -125,6 +126,17 @@ static uec_info_t eth4_uec_info = {
 };
 #endif
 
+#define MAXCONTROLLERS	(4)
+
+static struct eth_device *devlist[MAXCONTROLLERS];
+
+static int uec_miiphy_read(char *devname, unsigned char addr,
+			    unsigned char reg, unsigned short *value);
+static int uec_miiphy_write(char *devname, unsigned char addr,
+			     unsigned char reg, unsigned short value);
+u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
+void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
+
 static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
 {
 	uec_t		*uec_regs;
@@ -1334,6 +1346,8 @@ int uec_initialize(int index)
 		return -EINVAL;
 	}
 
+	devlist[index] = dev;
+
 	uec->uec_info = uec_info;
 
 	sprintf(dev->name, "FSL UEC%d", index);
@@ -1356,6 +1370,45 @@ int uec_initialize(int index)
 		return err;
 	}
 
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+	&& !defined(BITBANGMII)
+	miiphy_register(dev->name, uec_miiphy_read, uec_miiphy_write);
+#endif
+
 	return 1;
 }
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+	&& !defined(BITBANGMII)
+
+/*
+ * Read a MII PHY register.
+ *
+ * Returns:
+ *  0 on success
+ */
+static int uec_miiphy_read(char *devname, unsigned char addr,
+			    unsigned char reg, unsigned short *value)
+{
+	*value = uec_read_phy_reg(devlist[0], addr, reg);
+
+	return 0;
+}
+
+/*
+ * Write a MII PHY register.
+ *
+ * Returns:
+ *  0 on success
+ */
+static int uec_miiphy_write(char *devname, unsigned char addr,
+			     unsigned char reg, unsigned short value)
+{
+	uec_write_phy_reg(devlist[0], addr, reg, value);
+
+	return 0;
+}
+
+#endif
+
 #endif /* CONFIG_QE */

-- 
View this message in context: http://www.nabble.com/-PATCH--resubmit--QE-UEC%3A-Add-MII-Commands-tp16394809p16394809.html
Sent from the Uboot - Users mailing list archive at Nabble.com.