[U-Boot-Users] [PATCH 1/4] PPC: Create and use CONFIG_HIGH_BATS
becky.bruce at freescale.com
becky.bruce at freescale.com
Thu May 8 21:41:22 CEST 2008
From: Becky Bruce <becky.bruce at freescale.com>
Change all code that conditionally operates on high bat
registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
instead of the myriad ways this is done now. Define the option
for every config for which high bats are supported (and
enabled by early boot, on parts where they're not always
enabled)
Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
---
cpu/74xx_7xx/start.S | 6 +++---
cpu/mpc83xx/start.S | 6 +++---
include/configs/Alaska8220.h | 2 ++
include/configs/BC3450.h | 2 ++
include/configs/CPCI750.h | 2 ++
include/configs/IceCube.h | 2 ++
include/configs/MPC8313ERDB.h | 2 ++
include/configs/MPC8315ERDB.h | 1 +
include/configs/MPC8323ERDB.h | 1 +
include/configs/MPC832XEMDS.h | 2 ++
include/configs/MPC8349EMDS.h | 1 +
include/configs/MPC8349ITX.h | 1 +
include/configs/MPC8360EMDS.h | 2 ++
include/configs/MPC8360ERDK.h | 2 ++
include/configs/MPC837XEMDS.h | 1 +
include/configs/MPC837XERDB.h | 2 ++
include/configs/MPC8610HPCD.h | 1 +
include/configs/MPC8641HPCN.h | 1 +
include/configs/PM520.h | 2 ++
include/configs/TB5200.h | 2 ++
include/configs/TOP5200.h | 2 ++
include/configs/TQM5200.h | 2 ++
include/configs/TQM834x.h | 2 ++
include/configs/Total5200.h | 2 ++
include/configs/Yukon8220.h | 2 ++
include/configs/ads5121.h | 2 ++
include/configs/aev.h | 2 ++
include/configs/canmb.h | 2 ++
include/configs/cm5200.h | 2 ++
include/configs/cpci5200.h | 2 ++
include/configs/hmi1001.h | 2 ++
include/configs/inka4x0.h | 2 ++
include/configs/jupiter.h | 2 ++
include/configs/mcc200.h | 2 ++
include/configs/mecp5200.h | 2 ++
include/configs/motionpro.h | 1 +
include/configs/mpc7448hpc2.h | 2 +-
include/configs/munices.h | 1 +
include/configs/o2dnt.h | 2 ++
include/configs/p3mx.h | 1 +
include/configs/pf5200.h | 1 +
include/configs/sbc8349.h | 2 ++
include/configs/smmaco4.h | 2 ++
include/configs/sorcery.h | 2 ++
include/configs/spieval.h | 2 ++
include/configs/uc101.h | 2 ++
include/configs/v38b.h | 2 ++
47 files changed, 84 insertions(+), 7 deletions(-)
diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S
index b5834b9..42b0f72 100644
--- a/cpu/74xx_7xx/start.S
+++ b/cpu/74xx_7xx/start.S
@@ -316,7 +316,7 @@ invalidate_bats:
mtspr IBAT1U, r0
mtspr IBAT2U, r0
mtspr IBAT3U, r0
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
mtspr IBAT4U, r0
mtspr IBAT5U, r0
mtspr IBAT6U, r0
@@ -327,7 +327,7 @@ invalidate_bats:
mtspr DBAT1U, r0
mtspr DBAT2U, r0
mtspr DBAT3U, r0
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
mtspr DBAT4U, r0
mtspr DBAT5U, r0
mtspr DBAT6U, r0
@@ -414,7 +414,7 @@ setup_bats:
mtspr DBAT3U, r3
isync
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
/* IBAT 4 */
addis r4, r0, CFG_IBAT4L at h
ori r4, r4, CFG_IBAT4L at l
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index 309eb30..c182174 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -557,7 +557,7 @@ invalidate_bats:
mtspr IBAT1U, r0
mtspr IBAT2U, r0
mtspr IBAT3U, r0
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
mtspr IBAT4U, r0
mtspr IBAT5U, r0
mtspr IBAT6U, r0
@@ -568,7 +568,7 @@ invalidate_bats:
mtspr DBAT1U, r0
mtspr DBAT2U, r0
mtspr DBAT3U, r0
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
mtspr DBAT4U, r0
mtspr DBAT5U, r0
mtspr DBAT6U, r0
@@ -655,7 +655,7 @@ setup_bats:
mtspr DBAT3U, r3
isync
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
/* IBAT 4 */
addis r4, r0, CFG_IBAT4L at h
ori r4, r4, CFG_IBAT4L at l
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 3f2f614..38b962f 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -31,6 +31,8 @@
#define CONFIG_MPC8220 1
#define CONFIG_ALASKA8220 1 /* ... on Alaska board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
determine the CPU speed. */
#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 706c13e..b7574bf 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -61,6 +61,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 48e29a2..89edbde 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -61,6 +61,8 @@
#undef CONFIG_ECC /* enable ECC support */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* which initialization functions to call for this board */
#define CONFIG_MISC_INIT_R
#define CONFIG_BOARD_PRE_INIT
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 38a0226..ebd5f0d 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -37,6 +37,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 6eec240..482120d 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -466,6 +466,8 @@
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR @ 0x00000000 */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index e0a887c..7a5d0aa 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -453,6 +453,7 @@
/*
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 32f57ac..977c041 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -468,6 +468,7 @@
/*
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index ddefa5e..dd0f256 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -483,6 +483,8 @@
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 364ffac..20eec67 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -616,6 +616,7 @@
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR @ 0x00000000 */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index be8850a..b78fc9f 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -555,6 +555,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CFG_HID0_FINAL CFG_HID0_INIT
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 983575e..fcfbe6f 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -515,6 +515,8 @@
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index a4f6af6..fe0173b 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -419,6 +419,8 @@
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index e92493a..4e159a0 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -502,6 +502,7 @@
/*
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR: cache cacheable */
#define CFG_SDRAM_LOWER CFG_SDRAM_BASE
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index f7e6fd2..29c2490 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -524,6 +524,8 @@
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_SDRAM_LOWER CFG_SDRAM_BASE
#define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000)
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 585411c..a14bd30 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -55,6 +55,7 @@
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported & enabled */
#define CONFIG_ALTIVEC 1
/*
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index a8d0077..6ff4f92 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -67,6 +67,7 @@
#define BANK_INTERLEAVING 0x22000000
#define SUPER_BANK_INTERLEAVING 0x23000000
+#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */
#define CONFIG_ALTIVEC 1
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index ad480a6..ce882e2 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -40,6 +40,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 6cb3022..d21783b 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -42,6 +42,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 1affcfd..086be90 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -50,6 +50,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index bff2edf..bfb478a 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -47,6 +47,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 02a16ac..7eb2d19 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -423,6 +423,8 @@ extern int tqm834x_num_flash_banks;
#define CFG_HID0_FINAL CFG_HID0_INIT
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR 0 - 512M */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 2507d77..94299b5 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -48,6 +48,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index 00c4ff0..1b4195a 100644
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -31,6 +31,8 @@
#define CONFIG_MPC8220 1
#define CONFIG_YUKON8220 1 /* ... on Yukon board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
determine the CPU speed. */
#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index 81e7c1e..f8fadef 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -357,6 +357,8 @@
#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Internal Definitions
*
diff --git a/include/configs/aev.h b/include/configs/aev.h
index e3f810c..c5e4759 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -41,6 +41,8 @@
#define CONFIG_AEVFIFO 1
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index 440972c..2465cda 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -40,6 +40,8 @@
#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index d554348..ef50c7c 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -31,6 +31,8 @@
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
#define CONFIG_CM5200 1 /* ... on CM5200 platform */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Supported commands
*/
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 1b30e51..fffd1fe 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -50,6 +50,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index e5a8897..ad7cf76 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -40,6 +40,8 @@
#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index c89f041..6ec92c3 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -40,6 +40,8 @@
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 0ac3e7e..050feca 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -41,6 +41,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index a9c86f9..e4c3f72 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -40,6 +40,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 49919fb..ccac069 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -50,6 +50,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 1503598..b6843af 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -35,6 +35,7 @@
#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */
#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/*
* BOOTP options
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index f614e67..a218f75 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -39,7 +39,7 @@
#define CONFIG_MPC7448HPC2
#define CONFIG_74xx
-#define CONFIG_750FX /* this option to enable init of extended BATs */
+#define CONFIG_HIGH_BATS /* High BATs supported */
#define CONFIG_ALTIVEC /* undef to disable */
#define CFG_BOARD_NAME "MPC7448 HPC II"
diff --git a/include/configs/munices.h b/include/configs/munices.h
index 38b27bb..e0046ec 100644
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -35,6 +35,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/*
* Command line configuration.
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 8dde1ef..88bdb03 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -37,6 +37,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index 45dc343..77f54d2 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -42,6 +42,7 @@
#if defined (CONFIG_P3M750)
#define CONFIG_750FX /* 750GL/GX/FX */
+#define CONFIG_HIGH_BATS /* High BATs supported */
#define CFG_BOARD_NAME "P3M750"
#define CFG_BUS_HZ 100000000
#define CFG_BUS_CLK CFG_BUS_HZ
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 2ce39c9..c065d33 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -49,6 +49,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/*
* Serial console configuration
*/
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 0ebc674..7481556 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -570,6 +570,8 @@
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR @ 0x00000000 */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 4578cae..3e47eb8 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -42,6 +42,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index b622a30..09b1af7 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -31,6 +31,8 @@
#define CONFIG_MPC8220 1
#define CONFIG_SORCERY 1 /* Sorcery board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to
determine the CPU speed. */
#define CFG_MPC8220_CLKIN 60000000 /* ... running at 60MHz */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 49213dc..69d2d67 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -44,6 +44,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/uc101.h b/include/configs/uc101.h
index dc1d7e1..042750e 100644
--- a/include/configs/uc101.h
+++ b/include/configs/uc101.h
@@ -40,6 +40,8 @@
#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index e24d6f7..c203522 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -46,6 +46,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
--
1.5.4.1
More information about the U-Boot
mailing list