[U-Boot-Users] Loading a kernel on MX31ADS using U-boot

[Guennadi Liakhovetski]

On Wed, 14 May 2008, Jens Gehrlein wrote:

> Apart from that, verify that your console=
> > command line parameter is correct, your machine ID matches, and that you
> > don't have a jtag debugger like bdi2000 connected when you're trying to
> > boot.
> 
> I have the same problem on our board: I don't see the console outputs if the
> BDI2000 cable is connected to the target, although the BDI is in mode "reset
> run". Do have an idea why?

No, I don't know "why", but that's exactly why I've mentioned it above - I 
had the same problem here and I spent about half a day trying to figure 
out why it didn't boot.

Thanks
Guennadi
---
Guennadi Liakhovetski