[U-Boot-Users] [PATCH] MPC85xx: Change traps.c to not reference non-addressable memory

becky.bruce at freescale.com becky.bruce at freescale.com
Wed May 14 20:10:04 CEST 2008


From: Becky Bruce <becky.bruce at freescale.com>

Currently, END_OF_RAM is used by the trap code to determine if
we should attempt to access the stack pointer or not. However,
on systems with a lot of RAM, only a subset of the RAM is
guaranteed to be mapped in and accessible.  Change END_OF_RAM
to use get_effective_memsize() instead of using the raw ram
size out of the bd.

Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
---
 cpu/mpc85xx/traps.c |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c
index 2381fb0..fd36658 100644
--- a/cpu/mpc85xx/traps.c
+++ b/cpu/mpc85xx/traps.c
@@ -50,10 +50,12 @@ int (*debugger_exception_handler)(struct pt_regs *) = 0;
 extern unsigned long search_exception_table(unsigned long);
 
 /*
- * End of memory as shown by board info and determined by DDR setup.
+ * End of addressable memory.  This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
  */
-#define END_OF_MEM	(gd->bd->bi_memstart + gd->bd->bi_memsize)
-
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
 
 static __inline__ void set_tsr(unsigned long val)
 {
-- 
1.5.4.1





More information about the U-Boot mailing list