[U-Boot-Users] [PATCH V2] PPC4xx: Unify ECC Initialization Routines

Grant Erickson gerickson at nuovations.com
Sat May 17 09:16:20 CEST 2008


This patch continues laying the ground work for moving out-of-assembly
and unifying the SDRAM initialization code for PowerPC 405EX[r]-based
boards.

To do so, this deduces by one the number of nearly-identical DRAM ECC
initialization implementations for PowerPC 4xx processors utilizing a
DDR/DDR2 SDRAM controller by merging two of them into a common, shared
implementation.

The last revision of this patch failed to compile on 440ERX/GPX
systems, so the appropriate preprocessor wrappers were added to
address it.

Signed-off-by: Grant Erickson <gerickson at nuovations.com>
---
 cpu/ppc4xx/44x_spd_ddr.c |   51 ++------------------
 cpu/ppc4xx/Makefile      |    1 +
 cpu/ppc4xx/ecc.c         |  119 ++++++++++++++++++++++++++++++++++++++++++++++
 cpu/ppc4xx/ecc.h         |   42 ++++++++++++++++
 cpu/ppc4xx/sdram.c       |   46 +-----------------
 5 files changed, 170 insertions(+), 89 deletions(-)
 create mode 100644 cpu/ppc4xx/ecc.c
 create mode 100644 cpu/ppc4xx/ecc.h

diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index b9cf5cb..7f04ca6 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -53,6 +53,10 @@
 #include <ppc4xx.h>
 #include <asm/mmu.h>
 
+#ifdef CONFIG_DDR_ECC
+#include "ecc.h"
+#endif
+
 #if defined(CONFIG_SPD_EEPROM) &&					\
 	(defined(CONFIG_440GP) || defined(CONFIG_440GX) ||		\
 	 defined(CONFIG_440EP) || defined(CONFIG_440GR))
@@ -296,10 +300,6 @@ static void program_tr0(unsigned long *dimm_populated,
 			unsigned long num_dimm_banks);
 static void program_tr1(void);
 
-#ifdef CONFIG_DDR_ECC
-static void program_ecc(unsigned long num_bytes);
-#endif
-
 static unsigned long program_bxcr(unsigned long *dimm_populated,
 				  unsigned char *iic0_dimm_addr,
 				  unsigned long num_dimm_banks);
@@ -418,7 +418,7 @@ long int spd_sdram(void) {
 	/*
 	 * If ecc is enabled, initialize the parity bits.
 	 */
-	program_ecc(total_size);
+	ecc_init(CFG_SDRAM_BASE, total_size);
 #endif
 
 	return total_size;
@@ -1402,45 +1402,4 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
 
 	return(bank_base_addr);
 }
-
-#ifdef CONFIG_DDR_ECC
-static void program_ecc(unsigned long num_bytes)
-{
-	unsigned long bank_base_addr;
-	unsigned long current_address;
-	unsigned long end_address;
-	unsigned long address_increment;
-	unsigned long cfg0;
-
-	/*
-	 * get Memory Controller Options 0 data
-	 */
-	mfsdram(mem_cfg0, cfg0);
-
-	/*
-	 * reset the bank_base address
-	 */
-	bank_base_addr = CFG_SDRAM_BASE;
-
-	if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) {
-		mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_GEN);
-
-		if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32)
-			address_increment = 4;
-		else
-			address_increment = 8;
-
-		current_address = (unsigned long)(bank_base_addr);
-		end_address = (unsigned long)(bank_base_addr) + num_bytes;
-
-		while (current_address < end_address) {
-			*((unsigned long*)current_address) = 0x00000000;
-			current_address += address_increment;
-		}
-
-		mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
-			SDRAM_CFG0_MCHK_CHK);
-	}
-}
-#endif /* CONFIG_DDR_ECC */
 #endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 178c5c6..800bb41 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -45,6 +45,7 @@ COBJS	+= cpu.o
 COBJS	+= cpu_init.o
 COBJS	+= denali_data_eye.o
 COBJS	+= denali_spd_ddr2.o
+COBJS	+= ecc.o
 COBJS	+= fdt.o
 COBJS	+= gpio.o
 COBJS	+= i2c.o
diff --git a/cpu/ppc4xx/ecc.c b/cpu/ppc4xx/ecc.c
new file mode 100644
index 0000000..dd45b50
--- /dev/null
+++ b/cpu/ppc4xx/ecc.c
@@ -0,0 +1,119 @@
+/*
+ *    Copyright (c) 2008 Nuovation System Designs, LLC
+ *	Grant Erickson <gerickson at nuovations.com>
+ *
+ *    Copyright (c) 2005-2007 DENX Software Engineering, GmbH
+ *	Stefan Roese <sr at denx.de>
+ *
+ *    Copyright (c) 2002 Artesyn Technology
+ *	Jun Gu <jung at artesyncp.com>
+ *
+ *    Copyright (c) 2001 Wave 7 Optics
+ *	Bill Hunter <williamhunter at attbi.com>x
+ *
+ *    See file CREDITS for list of people who contributed to this
+ *    project.
+ *
+ *    This program is free software; you can redistribute it and/or
+ *    modify it under the terms of the GNU General Public License as
+ *    published by the Free Software Foundation; either version 2 of
+ *    the License, or (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will abe useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ *    MA 02111-1307 USA
+ *
+ *    Description:
+ *	This file implements generic DRAM ECC initialization for
+ *	PowerPC processors using a SDRAM DDR/DDR2 controller,
+ *	including the 405EX(r), 440GP/GX/EP/GR, 440SP(E), and
+ *	460EX/GT.
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/processor.h>
+
+#include "ecc.h"
+
+#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
+#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC)
+/*
+ *  void ecc_init()
+ *
+ *  Description:
+ *    This routine initializes a range of DRAM ECC memory with known
+ *    data and enables ECC checking.
+ *
+ *  TO DO:
+ *    Improve performance by utilizing cache.
+ *
+ *  Input(s):
+ *    start - A pointer to the start of memory covered by ECC requiring
+ *	      initialization.
+ *    size  - The size, in bytes, of the memory covered by ECC requiring
+ *	      initialization.
+ *
+ *  Output(s):
+ *    start - A pointer to the start of memory covered by ECC with
+ *	      CFG_ECC_PATTERN written to all locations and ECC data
+ *	      primed.
+ *
+ *  Returns:
+ *    N/A
+ */
+void ecc_init(unsigned long * const start, unsigned long size)
+{
+	const unsigned long pattern = CFG_ECC_PATTERN;
+	unsigned * const end = (unsigned long * const)((long)start + size);
+	unsigned long * current = start;
+	unsigned long mcopt1;
+	long increment;
+
+	if (start >= end)
+		return;
+
+	mfsdram(SDRAM_MCOPT1, mcopt1);
+
+	/* Enable ECC generation without checking or reporting */
+
+	mtsdram(SDRAM_MCOPT1, ((mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) |
+			       SDRAM_MCOPT1_MCHK_GEN));
+
+	increment = sizeof(u32);
+
+#if defined(CONFIG_440)
+	/*
+	 * Look at the geometry of SDRAM (data width) to determine whether we
+	 * can skip words when writing.
+	 */
+
+	if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) != SDRAM_MCOPT1_DMWD_32)
+		increment = sizeof(u64);
+#endif /* defined(CONFIG_440) */
+
+	while (current < end) {
+		*current = pattern;
+		 current = (unsigned long *)((long)current + increment);
+	}
+
+	/* Wait until the writes are finished. */
+
+	sync();
+	eieio();
+
+	/* Enable ECC generation with checking and no reporting */
+
+	mtsdram(SDRAM_MCOPT1, ((mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) |
+			       SDRAM_MCOPT1_MCHK_CHK));
+}
+#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */
+#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
diff --git a/cpu/ppc4xx/ecc.h b/cpu/ppc4xx/ecc.h
new file mode 100644
index 0000000..da1c4fd
--- /dev/null
+++ b/cpu/ppc4xx/ecc.h
@@ -0,0 +1,42 @@
+/*
+ *    Copyright (c) 2008 Nuovation System Designs, LLC
+ *	Grant Erickson <gerickson at nuovations.com>
+ *
+ *    Copyright (c) 2007 DENX Software Engineering, GmbH
+ *	Stefan Roese <sr at denx.de>
+ *
+ *    See file CREDITS for list of people who contributed to this
+ *    project.
+ *
+ *    This program is free software; you can redistribute it and/or
+ *    modify it under the terms of the GNU General Public License as
+ *    published by the Free Software Foundation; either version 2 of
+ *    the License, or (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will abe useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ *    MA 02111-1307 USA
+ *
+ *    Description:
+ *	This file implements ECC initialization for PowerPC processors
+ *	using the SDRAM DDR2 controller, including the 405EX(r),
+ *	440SP(E), 460EX and 460GT.
+ *
+ */
+
+#ifndef _ECC_H_
+#define _ECC_H_
+
+#if !defined(CFG_ECC_PATTERN)
+#define	CFG_ECC_PATTERN	0x00000000
+#endif /* !defined(CFG_ECC_PATTERN) */
+
+extern void ecc_init(unsigned long * const start, unsigned long size);
+
+#endif /* _ECC_H_ */
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index 2724d91..bd0a827 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -31,6 +31,9 @@
 #include <ppc4xx.h>
 #include <asm/processor.h>
 #include "sdram.h"
+#ifdef CONFIG_SDRAM_ECC
+#include "ecc.h"
+#endif
 
 #ifdef CONFIG_SDRAM_BANK0
 
@@ -332,49 +335,6 @@ static void sdram_tr1_set(int ram_address, int* tr1_value)
 	*tr1_value = (first_good + last_bad) / 2;
 }
 
-#ifdef CONFIG_SDRAM_ECC
-static void ecc_init(ulong start, ulong size)
-{
-	ulong	current_addr;		/* current byte address */
-	ulong	end_addr;		/* end of memory region */
-	ulong	addr_inc;		/* address skip between writes */
-	ulong	cfg0_reg;		/* for restoring ECC state */
-
-	/*
-	 * TODO: Enable dcache before running this test (speedup)
-	 */
-
-	mfsdram(mem_cfg0, cfg0_reg);
-	mtsdram(mem_cfg0, (cfg0_reg & ~SDRAM_CFG0_MEMCHK) | SDRAM_CFG0_MEMCHK_GEN);
-
-	/*
-	 * look at geometry of SDRAM (data width) to determine whether we
-	 * can skip words when writing
-	 */
-	if ((cfg0_reg & SDRAM_CFG0_DRAMWDTH) == SDRAM_CFG0_DRAMWDTH_32)
-		addr_inc = 4;
-	else
-		addr_inc = 8;
-
-	current_addr = start;
-	end_addr = start + size;
-
-	while (current_addr < end_addr) {
-		*((ulong *)current_addr) = 0x00000000;
-		current_addr += addr_inc;
-	}
-
-	/*
-	 * TODO: Flush dcache and disable it again
-	 */
-
-	/*
-	 * Enable ecc checking and parity errors
-	 */
-	mtsdram(mem_cfg0, (cfg0_reg & ~SDRAM_CFG0_MEMCHK) | SDRAM_CFG0_MEMCHK_CHK);
-}
-#endif
-
 /*
  * Autodetect onboard DDR SDRAM on 440 platforms
  *
-- 
1.5.4.3




More information about the U-Boot mailing list