[U-Boot-Users] u-boot dos not autostart commands

[Alexei Babich]

Hi all.
I have PXA270 board with embedded by vendor bootleader - "U-Boot 1.3.0".
I define that environment:
---
$ printenv
baudrate=115200
bootdelay=3
bootargs=video=pxafb:mode:800x480-16,active,pixclock:37000,left:100,right:1,hsynclen:10,upper:20,lower:1,vsynclen:10,outputen:1,pixclockpol:0 root=/dev/sda1 rootdelay=20 console=ttyS0,115200
bootcmd=cp.b 01e00000 a1000000 13216e
stdin=serial
stdout=serial
stderr=serial

Environment size: 298/262140 bytes
---
But after power on, I cannot see countdown & run bootcmd.
If I 'run bootcmd' by hand - that works OK. But not automatically after power on.
Can anybody tell me, how I can solve this ?

Thank you.
-- 
Regards,
Alexei Babich, chematic engineer, OOO NPP "Rezonans", Chelyabinsk, Russia
http://www.rez.ru
Jabber ID: impatt at jabber.ru