[U-Boot-Users] [PATCH] Fixed reset for syscon3

[HarryCheng]

I have a customized MPC8548 board with several hardware reset source (to
HRESET AG17), and the trigger signal is a GPIO pin instead of the default
HRESET_REQ (AG16). the patch simply replaces the HRESET_REQ by the certain
pin of GUR registers on both cpu/mpc85xx/cpu.c of the u-boot and
arch/powerpc/platforms/85xx/misc.c of the linux.

For your reference. BRs

HarryCheng


wd wrote:
> 
> In message <1210361475.20678.14.camel at laptop> you wrote:
>>
>> There must be some mechanism to reset the board if the HRESET_REQ is
>> connected. If not connected, the board design must accomplish it in
>> another way. Then the platform code should take care of that.
> 
> Thanks a lot.
> 
> I see only a 1k pull-up in the schematics, nothing else.
> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> "The number  of  Unix  installations  has  grown  to  10,  with  more
> expected."    - The Unix Programmer's Manual, 2nd Edition, June, 1972
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
> Don't miss this year's exciting event. There's still time to save $100. 
> Use priority code J8TL2D2. 
> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 
> 

-- 
View this message in context: http://www.nabble.com/-PATCH--Fixed-reset-for-syscon3-tp17149919p17300422.html
Sent from the Uboot - Users mailing list archive at Nabble.com.