[U-Boot-Users] [Patch 08/17] U-Boot-V2:Commands: Unbreak loadb support
Menon, Nishanth
x0nishan at ti.com
Wed May 21 18:28:12 CEST 2008
This patch provides support for loadb and loady and enables the broken feature. xyzModem.c is brought in from U-Boot V1, Lindent, checkpatch and sparse cleaned :).
Signed-off-by: Nishanth Menon<x0nishan at ti.com>
---
commands/Kconfig | 14
commands/Makefile | 1
commands/loadb.c | 182 ++++++++---
commands/xyzModem.c | 792 ++++++++++++++++++++++++++++++++++++++++++++++++++++
lib/Makefile | 1
5 files changed, 932 insertions(+), 58 deletions(-)
Index: u-boot-v2.git/commands/Kconfig
===================================================================
--- u-boot-v2.git.orig/commands/Kconfig 2008-05-20 17:53:55.000000000 -0500
+++ u-boot-v2.git/commands/Kconfig 2008-05-20 17:54:18.000000000 -0500
@@ -121,13 +121,23 @@
endmenu
menu "memory "
+config LOAD_ADDR
+ depends on CMD_LOADB
+ hex
+ prompt "default load address"
+ help
+ Provide the default load address for the platform
config CMD_LOADB
- depends on BROKEN
select CRC16
- tristate
+ bool
prompt "loadb"
+config CMD_LOADY
+ select CRC16
+ bool
+ prompt "loady"
+
config CMD_LOADS
depends on BROKEN
tristate
Index: u-boot-v2.git/commands/Makefile
===================================================================
--- u-boot-v2.git.orig/commands/Makefile 2008-05-20 17:53:55.000000000 -0500
+++ u-boot-v2.git/commands/Makefile 2008-05-20 17:54:18.000000000 -0500
@@ -1,5 +1,6 @@
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-$(CONFIG_CMD_LOADB) += loadb.o xyzModem.o
+obj-$(CONFIG_CMD_LOADY) += loadb.o xyzModem.o
obj-$(CONFIG_CMD_LOADS) += loads.o
obj-$(CONFIG_CMD_ECHO) += echo.o
obj-$(CONFIG_CMD_MEMORY) += mem.o
Index: u-boot-v2.git/commands/loadb.c
===================================================================
--- u-boot-v2.git.orig/commands/loadb.c 2008-05-20 17:53:55.000000000 -0500
+++ u-boot-v2.git/commands/loadb.c 2008-05-20 17:58:05.000000000 -0500
@@ -1,3 +1,12 @@
+/**
+ * @file
+ * @brief LoadB and LoadY support.
+ *
+ * Provides loadb (over Kermit) and LoadY(over Y modem) support to download
+ * images.
+ *
+ * FileName: commands/loadb.c
+ */
/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd at denx.de.
@@ -26,14 +35,16 @@
*/
#include <common.h>
#include <command.h>
-#include <s_record.h>
-#include <net.h>
-#include <exports.h>
#include <xyzModem.h>
+#include <console.h>
+#include <errno.h>
+#include <environment.h>
+#include <cache.h>
-DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_CMD_LOADY
static ulong load_serial_ymodem (ulong offset);
+#endif
#define XON_CHAR 17
#define XOFF_CHAR 19
@@ -50,36 +61,70 @@
#define tochar(x) ((char) (((x) + SPACE) & 0xff))
#define untochar(x) ((int) (((x) - SPACE) & 0xff))
-extern int os_data_count;
-extern int os_data_header[8];
static void set_kerm_bin_mode(unsigned long *);
static int k_recv(void);
static ulong load_serial_bin (ulong offset);
-char his_eol; /* character he needs at end of packet */
-int his_pad_count; /* number of pad chars he needs */
-char his_pad_char; /* pad chars he needs */
-char his_quote; /* quote chars he'll use */
+static char his_eol; /* character he needs at end of packet */
+static int his_pad_count; /* number of pad chars he needs */
+static char his_pad_char; /* pad chars he needs */
+static char his_quote; /* quote chars he'll use */
+
-int do_load_serial_bin (cmd_tbl_t *cmdtp, int argc, char *argv[])
+/**
+ * @brief returns current used console device
+ *
+ * @return console device which is registered with CONSOLE_STDIN and
+ * CONSOLE_STDOUT
+ */
+static struct console_device *get_current_console(void)
+{
+ struct console_device *cdev;
+ /*
+ * Assumption to have BOTH CONSOLE_STDIN AND STDOUT in the
+ * same output console
+ */
+ for_each_console(cdev) {
+ if ((cdev->f_active & (CONSOLE_STDIN | CONSOLE_STDOUT)))
+ return cdev;
+ }
+ return NULL;
+}
+
+/**
+ * @brief provide the loadb(Kermit) or loadY mode support
+ *
+ * @param cmdtp
+ * @param argc
+ * @param argv
+ *
+ * @return success or failure
+ */
+static int do_load_serial_bin(cmd_tbl_t *cmdtp, int argc, char *argv[])
{
ulong offset = 0;
ulong addr;
int load_baudrate, current_baudrate;
int rcode = 0;
char *s;
+ struct console_device *cdev = get_current_console();
+ if (NULL == cdev) {
+ printf("No device with STDIN and STDOUT\n");
+ return -ENODEV;
+ }
- /* pre-set offset from CFG_LOAD_ADDR */
- offset = CFG_LOAD_ADDR;
+ /* pre-set offset from CONFIG_LOAD_ADDR */
+ offset = CONFIG_LOAD_ADDR;
/* pre-set offset from $loadaddr */
- if ((s = getenv("loadaddr")) != NULL) {
+ s = (char *) getenv("loadaddr");
+ if (s != NULL)
offset = simple_strtoul(s, NULL, 16);
- }
- load_baudrate = current_baudrate = gd->baudrate;
+ load_baudrate = current_baudrate =
+ simple_strtoul(cdev->baudrate_string, NULL, 10);
if (argc >= 2) {
offset = simple_strtoul(argv[1], NULL, 16);
@@ -96,15 +141,14 @@
printf ("## Switch baudrate to %d bps and press ENTER ...\n",
load_baudrate);
udelay(50000);
- gd->baudrate = load_baudrate;
- serial_setbrg ();
+ cdev->setbrg(cdev, load_baudrate);
udelay(50000);
for (;;) {
if (getc() == '\r')
break;
}
}
-
+#ifdef CONFIG_CMD_LOADY
if (strcmp(argv[0],"loady")==0) {
printf ("## Ready for binary (ymodem) download "
"to 0x%08lX at %d bps...\n",
@@ -113,7 +157,10 @@
addr = load_serial_ymodem (offset);
- } else {
+ }
+#endif
+#ifdef CONFIG_CMD_LOADB
+ if (strcmp(argv[0],"loadb")==0) {
printf ("## Ready for binary (kermit) download "
"to 0x%08lX at %d bps...\n",
@@ -122,20 +169,18 @@
addr = load_serial_bin (offset);
if (addr == ~0) {
- load_addr = 0;
printf ("## Binary (kermit) download aborted\n");
rcode = 1;
} else {
printf ("## Start Addr = 0x%08lX\n", addr);
- load_addr = addr;
}
}
+#endif
if (load_baudrate != current_baudrate) {
printf ("## Switch baudrate to %d bps and press ESC ...\n",
current_baudrate);
udelay (50000);
- gd->baudrate = current_baudrate;
- serial_setbrg ();
+ cdev->setbrg(cdev, current_baudrate);
udelay (50000);
for (;;) {
if (getc() == 0x1B) /* ESC */
@@ -147,6 +192,14 @@
}
+#ifdef CONFIG_CMD_LOADB
+/**
+ * @brief loadb Support over kermit protocol
+ *
+ * @param offset where to download to
+ *
+ * @return downloaded address
+ */
static ulong load_serial_bin (ulong offset)
{
int size, i;
@@ -175,17 +228,18 @@
return offset;
}
+#endif
-void send_pad (void)
+static void send_pad (void)
{
int count = his_pad_count;
while (count-- > 0)
- putc (his_pad_char);
+ console_putc (CONSOLE_STDOUT, his_pad_char);
}
/* converts escaped kermit char to binary char */
-char ktrans (char in)
+static char ktrans(char in)
{
if ((in & 0x60) == 0x40) {
return (char) (in & ~0x40);
@@ -195,7 +249,7 @@
return in;
}
-int chk1 (char *buffer)
+static int chk1 (char *buffer)
{
int total = 0;
@@ -205,16 +259,16 @@
return (int) ((total + ((total >> 6) & 0x03)) & 0x3f);
}
-void s1_sendpacket (char *packet)
+static void s1_sendpacket (char *packet)
{
send_pad ();
while (*packet) {
- putc (*packet++);
+ console_putc (CONSOLE_STDOUT, *packet++);
}
}
static char a_b[24];
-void send_ack (int n)
+static void send_ack (int n)
{
a_b[0] = START_CHAR;
a_b[1] = tochar (3);
@@ -227,7 +281,7 @@
s1_sendpacket (a_b);
}
-void send_nack (int n)
+static void send_nack (int n)
{
a_b[0] = START_CHAR;
a_b[1] = tochar (3);
@@ -246,14 +300,15 @@
if image is binary, no header is stored in os_data_header.
*/
-void (*os_data_init) (void);
-void (*os_data_char) (char new_char);
+static void (*os_data_init) (void);
+static void (*os_data_char) (char new_char);
static int os_data_state, os_data_state_saved;
-int os_data_count;
+static int os_data_count;
static int os_data_count_saved;
static char *os_data_addr, *os_data_addr_saved;
static char *bin_start_address;
-int os_data_header[8];
+/* FIXME: carry over feature to use this. commented for sparse warning
+static int os_data_header[8]; */
static void bin_data_init (void)
{
os_data_state = 0;
@@ -291,22 +346,22 @@
/* k_data_* simply handles the kermit escape translations */
static int k_data_escape, k_data_escape_saved;
-void k_data_init (void)
+static void k_data_init(void)
{
k_data_escape = 0;
os_data_init ();
}
-void k_data_save (void)
+static void k_data_save(void)
{
k_data_escape_saved = k_data_escape;
os_data_save ();
}
-void k_data_restore (void)
+static void k_data_restore(void)
{
k_data_escape = k_data_escape_saved;
os_data_restore ();
}
-void k_data_char (char new_char)
+static void k_data_char(char new_char)
{
if (k_data_escape) {
/* last char was escape - translate this character */
@@ -324,12 +379,12 @@
}
#define SEND_DATA_SIZE 20
-char send_parms[SEND_DATA_SIZE];
-char *send_ptr;
+static char send_parms[SEND_DATA_SIZE];
+static char *send_ptr;
/* handle_send_packet interprits the protocol info and builds and
sends an appropriate ack for what we can do */
-void handle_send_packet (int n)
+static void handle_send_packet(int n)
{
int length = 3;
int bytes;
@@ -588,11 +643,19 @@
return ((ulong) os_data_addr - (ulong) bin_start_address);
}
+#ifdef CONFIG_CMD_LOADY
static int getcxmodem(void) {
if (tstc())
return (getc());
return -1;
}
+/**
+ * @brief LoadY over ymodem protocol
+ *
+ * @param offset address to download to
+ *
+ * @return address downloaded
+ */
static ulong load_serial_ymodem (ulong offset)
{
int size;
@@ -633,19 +696,26 @@
return offset;
}
+#endif
-U_BOOT_CMD(
- loadb, 3, 0, do_load_serial_bin,
- "loadb - load binary file over serial line (kermit mode)\n",
- "[ off ] [ baud ]\n"
- " - load binary file over serial line"
- " with offset 'off' and baudrate 'baud'\n"
-);
-
-U_BOOT_CMD(
- loady, 3, 0, do_load_serial_bin,
- "loady - load binary file over serial line (ymodem mode)\n",
+static const __maybe_unused char cmd_loadb_help[] =
"[ off ] [ baud ]\n"
" - load binary file over serial line"
- " with offset 'off' and baudrate 'baud'\n"
-);
+ " with offset 'off' and baudrate 'baud'\n";
+#ifdef CONFIG_CMD_LOADB
+U_BOOT_CMD_START(loadb)
+ .maxargs = 3,
+ .cmd = do_load_serial_bin,
+ .usage = "load binary file over serial line (kermit mode)",
+ U_BOOT_CMD_HELP(cmd_loadb_help)
+U_BOOT_CMD_END
+#endif
+
+#ifdef CONFIG_CMD_LOADY
+U_BOOT_CMD_START(loady)
+ .maxargs = 3,
+ .cmd = do_load_serial_bin,
+ .usage = "load binary file over serial line (ymodem mode)",
+ U_BOOT_CMD_HELP(cmd_loadb_help)
+U_BOOT_CMD_END
+#endif
Index: u-boot-v2.git/commands/xyzModem.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ u-boot-v2.git/commands/xyzModem.c 2008-05-20 17:54:18.000000000 -0500
@@ -0,0 +1,792 @@
+/**
+ * @file
+ * @brief RedBoot stream handler for xyzModem protocol
+ *
+ * FileName: commands/xyzModem.c
+ * Originally from U-Boot V1 xyzModem.c
+ */
+/*
+ * 2008 - Nishanth Menon <x0nishan at ti.com>
+ * Modified for sparse and checkpatch.pl compliance
+ */
+/*
+ *==========================================================================
+ *
+ * xyzModem.c
+ *
+ * RedBoot stream handler for xyzModem protocol
+ *
+ *==========================================================================
+ *####ECOSGPLCOPYRIGHTBEGIN####
+ * -------------------------------------------
+ * This file is part of eCos, the Embedded Configurable Operating System.
+ * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+ * Copyright (C) 2002 Gary Thomas
+ *
+ * eCos is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 or (at your option) any later version.
+ *
+ * eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+ * WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with eCos; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * As a special exception, if other files instantiate templates or use macros
+ * or inline functions from this file, or you compile this file and link it
+ * with other works to produce a work based on this file, this file does not
+ * by itself cause the resulting work to be covered by the GNU General Public
+ * License. However the source code for this file must still be made available
+ * in accordance with section (3) of the GNU General Public License.
+ *
+ * This exception does not invalidate any other reasons why a work based on
+ * this file might be covered by the GNU General Public License.
+ *
+ * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+ * at http: *sources.redhat.com/ecos/ecos-license/
+ * -------------------------------------------
+ *####ECOSGPLCOPYRIGHTEND####
+ *==========================================================================
+ *#####DESCRIPTIONBEGIN####
+ *
+ * Author(s): gthomas
+ * Contributors: gthomas, tsmith, Yoshinori Sato
+ * Date: 2000-07-14
+ * Purpose:
+ * Description:
+ *
+ * This code is part of RedBoot (tm).
+ *
+ *####DESCRIPTIONEND####
+ *
+ *==========================================================================
+ */
+#include <common.h>
+#include <xyzModem.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <console.h>
+#include <crc.h>
+
+/* Assumption - run xyzModem protocol over the console port */
+
+/* Values magic to the protocol */
+#define SOH 0x01
+#define STX 0x02
+#define EOT 0x04
+#define ACK 0x06
+#define BSP 0x08
+#define NAK 0x15
+#define CAN 0x18
+#define EOF 0x1A /* ^Z for DOS officionados */
+
+#define USE_YMODEM_LENGTH
+
+/* Data & state local to the protocol */
+static struct {
+#ifdef REDBOOT
+ hal_virtual_comm_table_t *__chan;
+#else
+ int *__chan;
+#endif
+ unsigned char pkt[1024], *bufp;
+ unsigned char blk, cblk, crc1, crc2;
+ unsigned char next_blk; /* Expected block */
+ int len, mode, total_retries;
+ int total_SOH, total_STX, total_CAN;
+ bool crc_mode, at_eof, tx_ack;
+#ifdef USE_YMODEM_LENGTH
+ unsigned long file_length, read_length;
+#endif
+} xyz;
+
+#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */
+#define xyzModem_MAX_RETRIES 20
+#define xyzModem_MAX_RETRIES_WITH_CRC 10
+/* Wait for 3 CAN before quitting */
+#define xyzModem_CAN_COUNT 3
+
+#ifndef REDBOOT /*SB */
+typedef int cyg_int32;
+static int CYGACC_COMM_IF_GETC_TIMEOUT(char chan, char *c)
+{
+#define DELAY 20
+ unsigned long counter = 0;
+ while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT * 1000 / DELAY)) {
+ udelay(DELAY);
+ counter++;
+ }
+ if (tstc()) {
+ *c = getc();
+ return 1;
+ }
+ return 0;
+}
+
+static void CYGACC_COMM_IF_PUTC(char x, char y)
+{
+ console_putc(CONSOLE_STDOUT, y);
+}
+
+/* Validate a hex character */
+static inline bool _is_hex(char c)
+{
+ return (((c >= '0') && (c <= '9')) ||
+ ((c >= 'A') && (c <= 'F')) || ((c >= 'a') && (c <= 'f')));
+}
+
+/* Convert a single hex nibble */
+static inline int _from_hex(char c)
+{
+ int ret = 0;
+
+ if ((c >= '0') && (c <= '9'))
+ ret = (c - '0');
+ else if ((c >= 'a') && (c <= 'f'))
+ ret = (c - 'a' + 0x0a);
+ else if ((c >= 'A') && (c <= 'F'))
+ ret = (c - 'A' + 0x0A);
+
+ return ret;
+}
+
+/* Convert a character to lower case */
+static inline char _tolower(char c)
+{
+ if ((c >= 'A') && (c <= 'Z'))
+ c = (c - 'A') + 'a';
+ return c;
+}
+
+/* Parse (scan) a number */
+static bool parse_num(char *s, unsigned long *val, char **es, char *delim)
+{
+ bool first = true;
+ int radix = 10;
+ char c;
+ unsigned long result = 0;
+ int digit;
+
+ while (*s == ' ')
+ s++;
+ while (*s) {
+ if (first && (s[0] == '0') && (_tolower(s[1]) == 'x')) {
+ radix = 16;
+ s += 2;
+ }
+ first = false;
+ c = *s++;
+ if (_is_hex(c))
+ digit = _from_hex(c);
+ if (_is_hex(c) && (digit < radix)) {
+ /* Valid digit */
+#ifdef CYGPKG_HAL_MIPS
+ /* FIXME: tx49 compiler generates 0x2539018 for
+ * MUL which isn't any good. */
+ if (16 == radix)
+ result = result << 4;
+ else
+ result = 10 * result;
+ result += digit;
+#else
+ result = (result * radix) + digit;
+#endif
+ } else {
+ if (delim != (char *)0) {
+ /* See if this character is one of the
+ * delimiters */
+ char *dp = delim;
+ while (*dp && (c != *dp))
+ dp++;
+ if (*dp)
+ break; /* Found a good delimiter */
+ }
+ return false; /* Malformatted number */
+ }
+ }
+ *val = result;
+ if (es != (char **)0)
+ *es = s;
+ return true;
+}
+
+#endif
+
+#define USE_SPRINTF
+#ifdef DEBUG
+#ifndef USE_SPRINTF
+/*
+ * Note: this debug setup only works if the target platform has two serial ports
+ * available so that the other one (currently only port 1) can be used for debug
+ * messages.
+ */
+static int zm_dprintf(char *fmt, ...)
+{
+ int cur_console;
+ va_list args;
+
+ va_start(args, fmt);
+#ifdef REDBOOT
+ cur_console =
+ CYGACC_CALL_IF_SET_CONSOLE_COMM
+ (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
+ CYGACC_CALL_IF_SET_CONSOLE_COMM(1);
+#endif
+ diag_vprintf(fmt, args);
+#ifdef REDBOOT
+ CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console);
+#endif
+}
+
+static void zm_flush(void)
+{
+}
+
+#else
+/*
+ * Note: this debug setup works by storing the strings in a fixed buffer
+ */
+#define FINAL
+#ifdef FINAL
+static char *zm_out = (char *)0x00380000;
+static char *zm_out_start = (char *)0x00380000;
+#else
+static char zm_buf[8192];
+static char *zm_out = zm_buf;
+static char *zm_out_start = zm_buf;
+
+#endif
+static int zm_dprintf(char *fmt, ...)
+{
+ int len;
+ va_list args;
+
+ va_start(args, fmt);
+ len = diag_vsprintf(zm_out, fmt, args);
+ zm_out += len;
+ return len;
+}
+
+static void zm_flush(void)
+{
+#ifdef REDBOOT
+ char *p = zm_out_start;
+ while (*p)
+ mon_write_char(*p++);
+#endif
+ zm_out = zm_out_start;
+}
+#endif
+
+static void zm_dump_buf(void *buf, int len)
+{
+#ifdef REDBOOT
+ diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0);
+#else
+
+#endif
+}
+
+static unsigned char zm_buf[2048];
+static unsigned char *zm_bp;
+
+static void zm_new(void)
+{
+ zm_bp = zm_buf;
+}
+
+static void zm_save(unsigned char c)
+{
+ *zm_bp++ = c;
+}
+
+static void zm_dump(int line)
+{
+ zm_dprintf("Packet at line: %d\n", line);
+ zm_dump_buf(zm_buf, zm_bp - zm_buf);
+}
+
+#define ZM_DEBUG(x) x
+#else
+#define ZM_DEBUG(x)
+#endif
+
+/* Wait for the line to go idle */
+static void xyzModem_flush(void)
+{
+ int res;
+ char c;
+ while (true) {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
+ if (!res)
+ return;
+ }
+}
+
+static int xyzModem_get_hdr(void)
+{
+ char c;
+ int res;
+ bool hdr_found = false;
+ int i, can_total, hdr_chars;
+ unsigned short cksum;
+
+ ZM_DEBUG(zm_new());
+ /* Find the start of a header */
+ can_total = 0;
+ hdr_chars = 0;
+
+ if (xyz.tx_ack) {
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
+ xyz.tx_ack = false;
+ }
+ while (!hdr_found) {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
+ ZM_DEBUG(zm_save(c));
+ if (res) {
+ hdr_chars++;
+ switch (c) {
+ case SOH:
+ xyz.total_SOH++;
+ case STX:
+ if (c == STX)
+ xyz.total_STX++;
+ hdr_found = true;
+ break;
+ case CAN:
+ xyz.total_CAN++;
+ ZM_DEBUG(zm_dump(__LINE__));
+ if (++can_total == xyzModem_CAN_COUNT) {
+ return xyzModem_cancel;
+ } else {
+ /* Wait for multiple CAN to avoid
+ * early quits */
+ break;
+ }
+ case EOT:
+ /* EOT only supported if no noise */
+ if (hdr_chars == 1) {
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
+ ZM_DEBUG(zm_dprintf
+ ("ACK on EOT #%d\n",
+ __LINE__));
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_eof;
+ }
+ default:
+ /* Ignore, waiting for start of header */
+ ;
+ }
+ } else {
+ /* Data stream timed out */
+ xyzModem_flush(); /* Toss any current input */
+ ZM_DEBUG(zm_dump(__LINE__));
+ CYGACC_CALL_IF_DELAY_US((cyg_int32) 250000);
+ return xyzModem_timeout;
+ }
+ }
+
+ /* Header found, now read the data */
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.blk);
+ ZM_DEBUG(zm_save(xyz.blk));
+ if (!res) {
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_timeout;
+ }
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.cblk);
+ ZM_DEBUG(zm_save(xyz.cblk));
+ if (!res) {
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_timeout;
+ }
+ xyz.len = (c == SOH) ? 128 : 1024;
+ xyz.bufp = xyz.pkt;
+ for (i = 0; i < xyz.len; i++) {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
+ ZM_DEBUG(zm_save(c));
+ if (res) {
+ xyz.pkt[i] = c;
+ } else {
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_timeout;
+ }
+ }
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc1);
+ ZM_DEBUG(zm_save(xyz.crc1));
+ if (!res) {
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_timeout;
+ }
+ if (xyz.crc_mode) {
+ res =
+ CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc2);
+ ZM_DEBUG(zm_save(xyz.crc2));
+ if (!res) {
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_timeout;
+ }
+ }
+ ZM_DEBUG(zm_dump(__LINE__));
+ /* Validate the message */
+ if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) {
+ ZM_DEBUG(zm_dprintf
+ ("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk,
+ (xyz.blk ^ xyz.cblk)));
+ ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len));
+ xyzModem_flush();
+ return xyzModem_frame;
+ }
+ /* Verify checksum/CRC */
+ if (xyz.crc_mode) {
+ cksum = cyg_crc16(xyz.pkt, xyz.len);
+ if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) {
+ ZM_DEBUG(zm_dprintf
+ ("CRC error - recvd: %02x%02x, computed: %x\n",
+ xyz.crc1, xyz.crc2, cksum & 0xFFFF));
+ return xyzModem_cksum;
+ }
+ } else {
+ cksum = 0;
+ for (i = 0; i < xyz.len; i++)
+ cksum += xyz.pkt[i];
+ if (xyz.crc1 != (cksum & 0xFF)) {
+ ZM_DEBUG(zm_dprintf
+ ("Checksum error - recvd: %x, computed: %x\n",
+ xyz.crc1, cksum & 0xFF));
+ return xyzModem_cksum;
+ }
+ }
+ /* If we get here, the message passes [structural] muster */
+ return 0;
+}
+
+int xyzModem_stream_open(connection_info_t *info, int *err)
+{
+#ifdef REDBOOT
+ int console_chan;
+#endif
+ int stat = 0;
+ int retries = xyzModem_MAX_RETRIES;
+ int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
+
+/* ZM_DEBUG(zm_out = zm_out_start); */
+#ifdef xyzModem_zmodem
+ if (info->mode == xyzModem_zmodem) {
+ *err = xyzModem_noZmodem;
+ return -1;
+ }
+#endif
+
+#ifdef REDBOOT
+ /* Set up the I/O channel. Note: this allows for using a different
+ * port in the future */
+ console_chan =
+ CYGACC_CALL_IF_SET_CONSOLE_COMM
+ (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
+ if (info->chan >= 0)
+ CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan);
+ else
+ CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
+
+ xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS();
+
+ CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
+ CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT,
+ xyzModem_CHAR_TIMEOUT);
+#else
+/* TODO: CHECK ! */
+ int dummy;
+ xyz.__chan = &dummy;
+#endif
+ xyz.len = 0;
+ xyz.crc_mode = true;
+ xyz.at_eof = false;
+ xyz.tx_ack = false;
+ xyz.mode = info->mode;
+ xyz.total_retries = 0;
+ xyz.total_SOH = 0;
+ xyz.total_STX = 0;
+ xyz.total_CAN = 0;
+#ifdef USE_YMODEM_LENGTH
+ xyz.read_length = 0;
+ xyz.file_length = 0;
+#endif
+
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
+
+ if (xyz.mode == xyzModem_xmodem) {
+ /* X-modem doesn't have an information header - exit here */
+ xyz.next_blk = 1;
+ return 0;
+ }
+
+ while (retries-- > 0) {
+ stat = xyzModem_get_hdr();
+ if (stat == 0) {
+ /* Y-modem file information header */
+ if (xyz.blk == 0) {
+#ifdef USE_YMODEM_LENGTH
+ /* skip filename */
+ while (*xyz.bufp++) ;
+ /* get the length */
+ parse_num((char *)xyz.bufp, &xyz.file_length,
+ NULL, " ");
+#endif
+ /* The rest of the file name data block
+ * quietly discarded
+ */
+ xyz.tx_ack = true;
+ }
+ xyz.next_blk = 1;
+ xyz.len = 0;
+ return 0;
+ } else if (stat == xyzModem_timeout) {
+ if (--crc_retries <= 0)
+ xyz.crc_mode = false;
+ /* Extra delay for startup */
+ CYGACC_CALL_IF_DELAY_US(5 * 100000);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,
+ (xyz.crc_mode ? 'C' : NAK));
+ xyz.total_retries++;
+ ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
+ }
+ if (stat == xyzModem_cancel)
+ break;
+ }
+ *err = stat;
+ ZM_DEBUG(zm_flush());
+ return -1;
+}
+
+int xyzModem_stream_read(char *buf, int size, int *err)
+{
+ int stat, total, len;
+ int retries;
+
+ total = 0;
+ stat = xyzModem_cancel;
+ /* Try and get 'size' bytes into the buffer */
+ while (!xyz.at_eof && (size > 0)) {
+ if (xyz.len == 0) {
+ retries = xyzModem_MAX_RETRIES;
+ while (retries-- > 0) {
+ stat = xyzModem_get_hdr();
+ if (stat == 0) {
+ if (xyz.blk == xyz.next_blk) {
+ xyz.tx_ack = true;
+ ZM_DEBUG(zm_dprintf
+ ("ACK block %d (%d)\n",
+ xyz.blk, __LINE__));
+ xyz.next_blk =
+ (xyz.next_blk + 1) & 0xFF;
+
+#if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH)
+ if (xyz.mode == xyzModem_xmodem
+ || xyz.file_length == 0) {
+#else
+ if (1) {
+#endif
+ /* WARNING - Leaving formatting aside for code
+ * clarity */
+ /* Data blocks can be padded with ^Z (EOF) characters */
+ /* This code tries to detect and remove them */
+ if ((xyz.bufp[xyz.len - 1] == EOF)
+ && (xyz.bufp[xyz.len - 2] == EOF)
+ && (xyz.bufp[xyz.len - 3] == EOF)) {
+ while (xyz.len &&
+ (xyz.bufp[xyz.len - 1] == EOF))
+ xyz.len--;
+ }
+ }
+#ifdef USE_YMODEM_LENGTH
+ /* WARNING - Leaving formatting aside for code
+ * clarity */
+ /*
+ * See if accumulated length exceeds that of the file.
+ * If so, reduce size (i.e., cut out pad bytes)
+ * Only do this for Y-modem (and Z-modem should it ever
+ * be supported since it can fall back to Y-modem mode).
+ */
+ if (xyz.mode != xyzModem_xmodem
+ && 0 != xyz.file_length) {
+ xyz.read_length += xyz.len;
+ if (xyz.read_length > xyz.file_length)
+ xyz.len -= (xyz.read_length -
+ xyz.file_length);
+ }
+#endif
+ break;
+ } else if (xyz.blk ==
+ ((xyz.next_blk - 1) &
+ 0xFF)) {
+ /* Just re-ACK this so sender
+ * will get on with it */
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,
+ ACK);
+ /* Need new header */
+ continue;
+ } else
+ stat = xyzModem_sequence;
+ }
+ if (stat == xyzModem_cancel)
+ break;
+ if (stat == xyzModem_eof) {
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
+ ZM_DEBUG(zm_dprintf
+ ("ACK (%d)\n", __LINE__));
+ if (xyz.mode == xyzModem_ymodem) {
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,
+ (xyz.
+ crc_mode ?
+ 'C' :
+ NAK));
+ xyz.total_retries++;
+ ZM_DEBUG(zm_dprintf
+ ("Reading Final Header\n"));
+ stat = xyzModem_get_hdr();
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,
+ ACK);
+ ZM_DEBUG(zm_dprintf
+ ("FINAL ACK (%d)\n",
+ __LINE__));
+ }
+ xyz.at_eof = true;
+ break;
+ }
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,
+ (xyz.crc_mode ? 'C' : NAK));
+ xyz.total_retries++;
+ ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
+ }
+ if (stat < 0) {
+ *err = stat;
+ xyz.len = -1;
+ return total;
+ }
+ }
+ /* Don't "read" data from the EOF protocol package */
+ if (!xyz.at_eof) {
+ len = xyz.len;
+ if (size < len)
+ len = size;
+ memcpy(buf, xyz.bufp, len);
+ size -= len;
+ buf += len;
+ total += len;
+ xyz.len -= len;
+ xyz.bufp += len;
+ }
+ }
+ return total;
+}
+
+void xyzModem_stream_close(int *err)
+{
+ diag_printf
+ ("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets,"
+ " %d retries\n",
+ xyz.crc_mode ? "CRC" : "Cksum", xyz.total_SOH, xyz.total_STX,
+ xyz.total_CAN, xyz.total_retries);
+ ZM_DEBUG(zm_flush());
+}
+
+/* Need to be able to clean out the input buffer, so have to take the */
+/* getc */
+void xyzModem_stream_terminate(bool abort, int (*getc) (void))
+{
+ int c;
+
+ if (abort) {
+ ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n"));
+ switch (xyz.mode) {
+ case xyzModem_xmodem:
+ case xyzModem_ymodem:
+ /* The X/YMODEM Spec seems to suggest that multiple CAN
+ * followed by an equal number of Backspaces is a
+ * friendly way to get the other end to abort. */
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
+ /* Now consume the rest of what's waiting on the line.*/
+ ZM_DEBUG(zm_dprintf("Flushing serial line.\n"));
+ xyzModem_flush();
+ xyz.at_eof = true;
+ break;
+#ifdef xyzModem_zmodem
+ case xyzModem_zmodem:
+ /* Might support it some day I suppose. */
+#endif
+ break;
+ }
+ } else {
+ ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n"));
+ /*
+ * Consume any trailing crap left in the inbuffer from
+ * previous recieved blocks. Since very few files are an
+ * exact multiple of the transfer block size, there will
+ * almost always be some gunk here.
+ * If we don't eat it now, RedBoot will think the user typed it.
+ */
+ ZM_DEBUG(zm_dprintf("Trailing gunk:\n"));
+ while ((c = (*getc) ()) > -1) ;
+ ZM_DEBUG(zm_dprintf("\n"));
+ /*
+ * Make a small delay to give terminal programs like minicom
+ * time to get control again after their file transfer program
+ * exits.
+ */
+ CYGACC_CALL_IF_DELAY_US((cyg_int32) 250000);
+ }
+}
+
+char *xyzModem_error(int err)
+{
+ switch (err) {
+ case xyzModem_access:
+ return "Can't access file";
+ break;
+ case xyzModem_noZmodem:
+ return "Sorry, zModem not available yet";
+ break;
+ case xyzModem_timeout:
+ return "Timed out";
+ break;
+ case xyzModem_eof:
+ return "End of file";
+ break;
+ case xyzModem_cancel:
+ return "Cancelled";
+ break;
+ case xyzModem_frame:
+ return "Invalid framing";
+ break;
+ case xyzModem_cksum:
+ return "CRC/checksum error";
+ break;
+ case xyzModem_sequence:
+ return "Block sequence error";
+ break;
+ default:
+ return "Unknown error";
+ break;
+ }
+}
+
+/*
+ * RedBoot interface
+ */
+#if 0 /* SB */
+GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
+ xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error);
+RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem);
+RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem);
+#endif
Index: u-boot-v2.git/lib/Makefile
===================================================================
--- u-boot-v2.git.orig/lib/Makefile 2008-05-20 17:53:55.000000000 -0500
+++ u-boot-v2.git/lib/Makefile 2008-05-20 17:54:18.000000000 -0500
@@ -19,6 +19,7 @@
obj-$(CONFIG_BZLIB) += bzlib.o bzlib_crctable.o bzlib_decompress.o bzlib_huffman.o bzlib_randtable.o
obj-$(CONFIG_ZLIB) += zlib.o gunzip.o
obj-$(CONFIG_CRC32) += crc32.o
+obj-$(CONFIG_CRC16) += crc16.o
obj-$(CONFIG_CMDLINE_EDITING) += readline.o
obj-$(CONFIG_SIMPLE_READLINE) += readline_simple.o
obj-$(CONFIG_GLOB) += fnmatch.o
More information about the U-Boot
mailing list