[U-Boot-Users] [Patch 12/17] U-Boot-V2:ARM:OMAP3: Add support for OMAP3 Silicon files
Menon, Nishanth
x0nishan at ti.com
Wed May 21 18:29:31 CEST 2008
This patch introduces support for OMAP3430 clocking infrastructure. Please note that SRAM based configuration requires GPMC values to be updated before returning to caller- TBD.
Signed-off-by: Nishanth Menon<x0nishan at ti.com>
---
arch/arm/mach-omap/omap3_clock.c | 378 ++++++++++++++++++++++++++++++++
arch/arm/mach-omap/omap3_clock_core.S | 312 ++++++++++++++++++++++++++
arch/arm/mach-omap/s32k_clksource.c | 80 ++++++
include/asm-arm/arch-omap/clocks.h | 48 ++++
include/asm-arm/arch-omap/omap3-clock.h | 124 ++++++++++
5 files changed, 942 insertions(+)
Index: u-boot-v2.git/arch/arm/mach-omap/omap3_clock.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ u-boot-v2.git/arch/arm/mach-omap/omap3_clock.c 2008-05-20 17:53:04.000000000 -0500
@@ -0,0 +1,378 @@
+/**
+ * @file
+ * @brief OMAP DPLL and various clock configuration
+ *
+ * FileName: arch/arm/mach-omap/omap3_clock.c
+ *
+ * @ref prcm_init This is the second level clock init for PRCM as defined in
+ * clocks.h -- called from SRAM, or Flash (using temp SRAM stack).
+ *
+ * During reconfiguring the clocks while in SDRAM/Flash, we can have invalid
+ * clock configuration to which ARM instruction/data fetch ops can fail.
+ * This critical path is handled by relocating the relevant functions in
+ * omap3_clock_core.S to OMAP's ISRAM and executing it there.
+ *
+ * @warning: IMPORTANT: These functions run from ISRAM stack, so no bss sections
+ * should be used: functions cannot use global variables/switch constructs.
+ *
+ * Originally from http://linux.omap.com/pub/bootloader/3430sdp/u-boot-v1.tar.gz
+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2 at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/silicon.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/timers.h>
+#include <asm/arch/sys_info.h>
+#include <asm/arch/syslib.h>
+
+/* Following functions are exported from omap3_clock_core.S */
+#ifdef CONFIG_OMAP3_COPY_CLOCK_SRAM
+/* A.K.A go_to_speed */
+static void (*f_lock_pll) (u32, u32, u32, u32);
+#endif
+/* Helper functions */
+static u32 get_osc_clk_speed(void);
+static void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel);
+static void per_clocks_enable(void);
+
+/**
+ * @brief Determine reference oscillator speed
+ *
+ * This is based on known 32kHz clock and gptimer.
+ *
+ * @return clock speed S38_4M, S26M S24M S19_2M S13M S12M
+ */
+static u32 get_osc_clk_speed(void)
+{
+ u32 start, cstart, cend, cdiff, val;
+
+ val = __raw_readl(PRM_REG(CLKSRC_CTRL));
+ /* If SYS_CLK is being divided by 2, remove for now */
+ val = (val & (~BIT7)) | BIT6;
+ __raw_writel(val, PRM_REG(CLKSRC_CTRL));
+
+ /* enable timer2 */
+ val = __raw_readl(CM_REG(CLKSEL_WKUP)) | BIT0;
+ __raw_writel(val, CM_REG(CLKSEL_WKUP)); /* select sys_clk for GPT1 */
+
+ /* Enable I and F Clocks for GPT1 */
+ val = __raw_readl(CM_REG(ICLKEN_WKUP)) | BIT0 | BIT2;
+ __raw_writel(val, CM_REG(ICLKEN_WKUP));
+ val = __raw_readl(CM_REG(FCLKEN_WKUP)) | BIT0;
+ __raw_writel(val, CM_REG(FCLKEN_WKUP));
+
+ __raw_writel(0, OMAP_GPTIMER1_BASE + TLDR); /* start counting at 0 */
+ __raw_writel(GPT_EN, OMAP_GPTIMER1_BASE + TCLR); /* enable clock */
+ /* enable 32kHz source *//* enabled out of reset */
+ /* determine sys_clk via gauging */
+
+ start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */
+ while (__raw_readl(S32K_CR) < start) ; /* dead loop till start time */
+ /* get start sys_clk count */
+ cstart = __raw_readl(OMAP_GPTIMER1_BASE + TCRR);
+ while (__raw_readl(S32K_CR) < (start + 20)) ; /* wait for 40 cycles */
+ /* get end sys_clk count */
+ cend = __raw_readl(OMAP_GPTIMER1_BASE + TCRR);
+ cdiff = cend - cstart; /* get elapsed ticks */
+
+ /* based on number of ticks assign speed */
+ if (cdiff > 19000)
+ return (S38_4M);
+ else if (cdiff > 15200)
+ return (S26M);
+ else if (cdiff > 13000)
+ return (S24M);
+ else if (cdiff > 9000)
+ return (S19_2M);
+ else if (cdiff > 7600)
+ return (S13M);
+ else
+ return (S12M);
+}
+
+/**
+ * @brief Returns the sys_clkin_sel field value
+ *
+ * This is based on input oscillator clock frequency.
+ *
+ * @param[in] osc_clk - Oscilaltor Clock to OMAP
+ * @param[out] sys_clkin_sel - returns the sys_clk selection
+ *
+ * @return void
+ */
+static void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
+{
+ if (osc_clk == S38_4M)
+ *sys_clkin_sel = 4;
+ else if (osc_clk == S26M)
+ *sys_clkin_sel = 3;
+ else if (osc_clk == S19_2M)
+ *sys_clkin_sel = 2;
+ else if (osc_clk == S13M)
+ *sys_clkin_sel = 1;
+ else if (osc_clk == S12M)
+ *sys_clkin_sel = 0;
+}
+
+/**
+ * @brief Inits clocks for PRCM
+ *
+ * This is called from SRAM, or Flash (using temp SRAM stack).
+ * if CONFIG_OMAP3_COPY_CLOCK_SRAM is defined, @ref go_to_speed
+ *
+ * @return void
+ */
+void prcm_init(void)
+{
+ int xip_safe;
+ u32 osc_clk = 0, sys_clkin_sel = 0;
+ u32 clk_index, sil_index;
+ struct dpll_param *dpll_param_p;
+#ifdef CONFIG_OMAP3_COPY_CLOCK_SRAM
+ int p0, p1, p2, p3;
+ f_lock_pll = (void *)(OMAP_SRAM_INTVECT + OMAP_SRAM_INTVECT_COPYSIZE);
+#endif
+
+ xip_safe = running_in_sram();
+
+ /* Gauge the input clock speed and find out the sys_clkin_sel
+ * value corresponding to the input clock.
+ */
+ osc_clk = get_osc_clk_speed();
+ get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
+ /* set input crystal speed */
+ sr32(PRM_REG(CLKSEL), 0, 3, sys_clkin_sel);
+
+ /* If the input clock is greater than 19.2M always divide/2 */
+ if (sys_clkin_sel > 2) {
+ /* input clock divider */
+ sr32(PRM_REG(CLKSRC_CTRL), 6, 2, 2);
+ clk_index = sys_clkin_sel / 2;
+ } else {
+ /* input clock divider */
+ sr32(PRM_REG(CLKSRC_CTRL), 6, 2, 1);
+ clk_index = sys_clkin_sel;
+ }
+
+ /* The DPLL tables are defined according to sysclk value and
+ * silicon revision. The clk_index value will be used to get
+ * the values for that input sysclk from the DPLL param table
+ * and sil_index will get the values for that SysClk for the
+ * appropriate silicon rev.
+ */
+ if (get_cpu_rev() >= CPU_ES2)
+ sil_index = 1;
+ /* Unlock MPU DPLL (slows things down, and needed later) */
+ sr32(CM_REG(CLKEN_PLL_MPU), 0, 3, PLL_LOW_POWER_BYPASS);
+ wait_on_value(BIT0, 0, CM_REG(IDLEST_PLL_MPU), LDELAY);
+
+ /* Getting the base address of Core DPLL param table */
+ dpll_param_p = (struct dpll_param *) get_core_dpll_param();
+ /* Moving it to the right sysclk and ES rev base */
+ dpll_param_p = dpll_param_p + MAX_SIL_INDEX * clk_index + sil_index;
+ if (xip_safe) {
+ /* CORE DPLL */
+ /* sr32(CM_REG(CLKSEL2_EMU)) set override to work when asleep */
+ sr32(CM_REG(CLKEN_PLL), 0, 3, PLL_FAST_RELOCK_BYPASS);
+ wait_on_value(BIT0, 0, CM_REG(IDLEST_CKGEN), LDELAY);
+ /* For 3430 ES1.0 Errata 1.50, default value directly doesnt
+ work. write another value and then default value. */
+ sr32(CM_REG(CLKSEL1_EMU), 16, 5, CORE_M3X2 + 1); /* m3x2 */
+ sr32(CM_REG(CLKSEL1_EMU), 16, 5, CORE_M3X2); /* m3x2 */
+ sr32(CM_REG(CLKSEL1_PLL), 27, 2, dpll_param_p->m2); /* Set M2 */
+ sr32(CM_REG(CLKSEL1_PLL), 16, 11, dpll_param_p->m); /* Set M */
+ sr32(CM_REG(CLKSEL1_PLL), 8, 7, dpll_param_p->n); /* Set N */
+ sr32(CM_REG(CLKSEL1_PLL), 6, 1, 0); /* 96M Src */
+ sr32(CM_REG(CLKSEL_CORE), 8, 4, CORE_SSI_DIV); /* ssi */
+ sr32(CM_REG(CLKSEL_CORE), 4, 2, CORE_FUSB_DIV); /* fsusb */
+ sr32(CM_REG(CLKSEL_CORE), 2, 2, CORE_L4_DIV); /* l4 */
+ sr32(CM_REG(CLKSEL_CORE), 0, 2, CORE_L3_DIV); /* l3 */
+ sr32(CM_REG(CLKSEL_GFX), 0, 3, GFX_DIV); /* gfx */
+ sr32(CM_REG(CLKSEL_WKUP), 1, 2, WKUP_RSM); /* reset mgr */
+ sr32(CM_REG(CLKEN_PLL), 4, 4, dpll_param_p->fsel); /* FREQSEL */
+ sr32(CM_REG(CLKEN_PLL), 0, 3, PLL_LOCK); /* lock mode */
+ wait_on_value(BIT0, 1, CM_REG(IDLEST_CKGEN), LDELAY);
+ } else if (running_in_flash()) {
+#ifdef CONFIG_OMAP3_COPY_CLOCK_SRAM
+ /* if running from flash,
+ * jump to small relocated code area in SRAM.
+ */
+ p0 = __raw_readl(CM_REG(CLKEN_PLL));
+ sr32((u32) &p0, 0, 3, PLL_FAST_RELOCK_BYPASS);
+ sr32((u32) &p0, 4, 4, dpll_param_p->fsel); /* FREQSEL */
+
+ p1 = __raw_readl(CM_REG(CLKSEL1_PLL));
+ sr32((u32) &p1, 27, 2, dpll_param_p->m2); /* Set M2 */
+ sr32((u32) &p1, 16, 11, dpll_param_p->m); /* Set M */
+ sr32((u32) &p1, 8, 7, dpll_param_p->n); /* Set N */
+ sr32((u32) &p1, 6, 1, 0); /* set source for 96M */
+ p2 = __raw_readl(CM_REG(CLKSEL_CORE));
+ sr32((u32) &p2, 8, 4, CORE_SSI_DIV); /* ssi */
+ sr32((u32) &p2, 4, 2, CORE_FUSB_DIV); /* fsusb */
+ sr32((u32) &p2, 2, 2, CORE_L4_DIV); /* l4 */
+ sr32((u32) &p2, 0, 2, CORE_L3_DIV); /* l3 */
+
+ p3 = CM_REG(IDLEST_CKGEN);
+
+ (*f_lock_pll) (p0, p1, p2, p3);
+#else
+ /***Oopps.. Wrong .config!! *****/
+ hang();
+#endif
+ }
+
+ /* PER DPLL */
+ sr32(CM_REG(CLKEN_PLL), 16, 3, PLL_STOP);
+ wait_on_value(BIT1, 0, CM_REG(IDLEST_CKGEN), LDELAY);
+
+ /* Getting the base address to PER DPLL param table */
+ /* Set N */
+ dpll_param_p = (struct dpll_param *) get_per_dpll_param();
+ /* Moving it to the right sysclk base */
+ dpll_param_p = dpll_param_p + clk_index;
+ /* Errata 1.50 Workaround for 3430 ES1.0 only */
+ /* If using default divisors, write default divisor + 1
+ and then the actual divisor value */
+ /* Need to change it to silicon and revisino check */
+ if (1) {
+ sr32(CM_REG(CLKSEL1_EMU), 24, 5, PER_M6X2 + 1); /* set M6 */
+ sr32(CM_REG(CLKSEL1_EMU), 24, 5, PER_M6X2); /* set M6 */
+ sr32(CM_REG(CLKSEL_CAM), 0, 5, PER_M5X2 + 1); /* set M5 */
+ sr32(CM_REG(CLKSEL_CAM), 0, 5, PER_M5X2); /* set M5 */
+ sr32(CM_REG(CLKSEL_DSS), 0, 5, PER_M4X2 + 1); /* set M4 */
+ sr32(CM_REG(CLKSEL_DSS), 0, 5, PER_M4X2); /* set M4 */
+ sr32(CM_REG(CLKSEL_DSS), 8, 5, PER_M3X2 + 1); /* set M3 */
+ sr32(CM_REG(CLKSEL_DSS), 8, 5, PER_M3X2); /* set M3 */
+ /* set M2 */
+ sr32(CM_REG(CLKSEL3_PLL), 0, 5, dpll_param_p->m2 + 1);
+ sr32(CM_REG(CLKSEL3_PLL), 0, 5, dpll_param_p->m2); /* set M2 */
+ } else {
+ sr32(CM_REG(CLKSEL1_EMU), 24, 5, PER_M6X2); /* set M6 */
+ sr32(CM_REG(CLKSEL_CAM), 0, 5, PER_M5X2); /* set M5 */
+ sr32(CM_REG(CLKSEL_DSS), 0, 5, PER_M4X2); /* set M4 */
+ sr32(CM_REG(CLKSEL_DSS), 8, 5, PER_M3X2); /* set M3 */
+ sr32(CM_REG(CLKSEL3_PLL), 0, 5, dpll_param_p->m2); /* set M2 */
+ }
+ sr32(CM_REG(CLKSEL2_PLL), 8, 11, dpll_param_p->m); /* set m */
+ sr32(CM_REG(CLKSEL2_PLL), 0, 7, dpll_param_p->n); /* set n */
+ sr32(CM_REG(CLKEN_PLL), 20, 4, dpll_param_p->fsel); /* FREQSEL */
+ sr32(CM_REG(CLKEN_PLL), 16, 3, PLL_LOCK); /* lock mode */
+ wait_on_value(BIT1, 2, CM_REG(IDLEST_CKGEN), LDELAY);
+
+ /* Getting the base address to MPU DPLL param table */
+ dpll_param_p = (struct dpll_param *) get_mpu_dpll_param();
+ /* Moving it to the right sysclk and ES rev base */
+ dpll_param_p = dpll_param_p + MAX_SIL_INDEX * clk_index + sil_index;
+ /* MPU DPLL (unlocked already) */
+ sr32(CM_REG(CLKSEL2_PLL_MPU), 0, 5, dpll_param_p->m2); /* Set M2 */
+ sr32(CM_REG(CLKSEL1_PLL_MPU), 8, 11, dpll_param_p->m); /* Set M */
+ sr32(CM_REG(CLKSEL1_PLL_MPU), 0, 7, dpll_param_p->n); /* Set N */
+ sr32(CM_REG(CLKEN_PLL_MPU), 4, 4, dpll_param_p->fsel); /* FREQSEL */
+ sr32(CM_REG(CLKEN_PLL_MPU), 0, 3, PLL_LOCK); /* lock mode */
+ wait_on_value(BIT0, 1, CM_REG(IDLEST_PLL_MPU), LDELAY);
+
+ /* Getting the base address to IVA DPLL param table */
+ dpll_param_p = (struct dpll_param *) get_iva_dpll_param();
+ /* Moving it to the right sysclk and ES rev base */
+ dpll_param_p = dpll_param_p + MAX_SIL_INDEX * clk_index + sil_index;
+ /* IVA DPLL (set to 12*20=240MHz) */
+ sr32(CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_STOP);
+ wait_on_value(BIT0, 0, CM_REG(IDLEST_PLL_IVA2), LDELAY);
+ sr32(CM_REG(CLKSEL2_PLL_IVA2), 0, 5, dpll_param_p->m2); /* set M2 */
+ sr32(CM_REG(CLKSEL1_PLL_IVA2), 8, 11, dpll_param_p->m); /* set M */
+ sr32(CM_REG(CLKSEL1_PLL_IVA2), 0, 7, dpll_param_p->n); /* set N */
+ sr32(CM_REG(CLKEN_PLL_IVA2), 4, 4, dpll_param_p->fsel); /* FREQSEL */
+ sr32(CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_LOCK); /* lock mode */
+ wait_on_value(BIT0, 1, CM_REG(IDLEST_PLL_IVA2), LDELAY);
+
+ /* Set up GPTimers to sys_clk source only */
+ sr32(CM_REG(CLKSEL_PER), 0, 8, 0xff);
+ sr32(CM_REG(CLKSEL_WKUP), 0, 1, 1);
+
+ sdelay(5000);
+
+ /* Enable Peripheral Clocks */
+ per_clocks_enable();
+}
+
+/**
+ * @brief Enable the clks & power for perifs
+ *
+ * GPT2 Sysclk, ICLK,FCLK, 32k Sync is enabled by default
+ * Uses CONFIG_OMAP_CLOCK_UART to enable UART clocks
+ * Uses CONFIG_OMAP_CLOCK_I2C to enable I2C clocks
+ * Uses CONFIG_OMAP_CLOCK_ALL to enable All Clocks!
+ * - Not a wise idea in most cases
+ *
+ * @return void
+ */
+static void per_clocks_enable(void)
+{
+ /* Enable GP2 timer. */
+ sr32(CM_REG(CLKSEL_PER), 0, 1, 0x1); /* GPT2 = sys clk */
+ sr32(CM_REG(ICLKEN_PER), 3, 1, 0x1); /* ICKen GPT2 */
+ sr32(CM_REG(FCLKEN_PER), 3, 1, 0x1); /* FCKen GPT2 */
+ /* Enable the ICLK for 32K Sync Timer as its used in udelay */
+ sr32(CM_REG(ICLKEN_WKUP), 2, 1, 0x1);
+
+#ifdef CONFIG_OMAP_CLOCK_UART
+ /* Enable UART1 clocks */
+ sr32(CM_REG(FCLKEN1_CORE), 13, 1, 0x1);
+ sr32(CM_REG(ICLKEN1_CORE), 13, 1, 0x1);
+#endif
+#ifdef CONFIG_OMAP_CLOCK_I2C
+ /* Turn on all 3 I2C clocks */
+ sr32(CM_REG(FCLKEN1_CORE), 15, 3, 0x7);
+ sr32(CM_REG(ICLKEN1_CORE), 15, 3, 0x7); /* I2C1,2,3 = on */
+#endif
+
+#ifdef CONFIG_OMAP_CLOCK_ALL
+#define FCK_IVA2_ON 0x00000001
+#define FCK_CORE1_ON 0x03fffe29
+#define ICK_CORE1_ON 0x3ffffffb
+#define ICK_CORE2_ON 0x0000001f
+#define FCK_WKUP_ON 0x000000e9
+#define ICK_WKUP_ON 0x0000003f
+#define FCK_DSS_ON 0x00000005 /* tv+dss1 (not dss2) */
+#define ICK_DSS_ON 0x00000001
+#define FCK_CAM_ON 0x00000001
+#define ICK_CAM_ON 0x00000001
+#define FCK_PER_ON 0x0003ffff
+#define ICK_PER_ON 0x0003ffff
+ sr32(CM_REG(FCLKEN_IVA2), 0, 32, FCK_IVA2_ON);
+ sr32(CM_REG(FCLKEN1_CORE), 0, 32, FCK_CORE1_ON);
+ sr32(CM_REG(ICLKEN1_CORE), 0, 32, ICK_CORE1_ON);
+ sr32(CM_REG(ICLKEN2_CORE), 0, 32, ICK_CORE2_ON);
+ sr32(CM_REG(FCLKEN_WKUP), 0, 32, FCK_WKUP_ON);
+ sr32(CM_REG(ICLKEN_WKUP), 0, 32, ICK_WKUP_ON);
+ sr32(CM_REG(FCLKEN_DSS), 0, 32, FCK_DSS_ON);
+ sr32(CM_REG(ICLKEN_DSS), 0, 32, ICK_DSS_ON);
+ sr32(CM_REG(FCLKEN_CAM), 0, 32, FCK_CAM_ON);
+ sr32(CM_REG(ICLKEN_CAM), 0, 32, ICK_CAM_ON);
+ sr32(CM_REG(FCLKEN_PER), 0, 32, FCK_PER_ON);
+ sr32(CM_REG(ICLKEN_PER), 0, 32, ICK_PER_ON);
+#endif
+ /* Settle down my friend */
+ sdelay(1000);
+}
Index: u-boot-v2.git/arch/arm/mach-omap/omap3_clock_core.S
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ u-boot-v2.git/arch/arm/mach-omap/omap3_clock_core.S 2008-05-20 17:47:25.000000000 -0500
@@ -0,0 +1,312 @@
+/**
+ * @file
+ * @brief Provides PRCM divisors and SRAM execution code.
+ *
+ * FileName: arch/arm/mach-omap/omap3_clock_core.S
+ *
+ * This provides two things:
+ * @li @ref omap3_clock.c cannot have switch or global variables.
+ * This file provides the constant data for the file to use.
+ *
+ * @li @ref prcm_init cannot execute certain critical clock
+ * configurations while running in SDRAM/Flash. This provides
+ * relocation and execution capability for the same.
+ *
+ * Orignally from http://linux.omap.com/pub/bootloader/3430sdp/u-boot-v1.tar.gz
+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2 at ti.com>
+ * Nishanth Menon <x0nishan at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/silicon.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/gpmc.h>
+
+#ifdef CONFIG_OMAP3_COPY_CLOCK_SRAM
+/**
+ * @fn void cpy_clk_code(u32 R1)
+ *
+ * @brief cpy_clk_code: relocates clock code into SRAM where its safer to
+ * execute
+ *
+ * @param[in] R1 = SRAM destination address.
+ *
+ * @return void
+ */
+.global cpy_clk_code
+ cpy_clk_code:
+ /* Copy DPLL code into SRAM */
+ adr r0, go_to_speed /* get addr of clock setting code */
+ mov r2, #384 /* r2 size to copy (div by 32 bytes) */
+ mov r1, r1 /* r1 <- dest address (passed in) */
+ add r2, r2, r0 /* r2 <- source end address */
+next2:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end address [r2] */
+ bne next2
+ mov pc, lr /* back to caller */
+
+/**
+ * @fn void go_to_speed(u32 R0, u32 R1, u32 R3)
+ *
+ * @brief go_to_speed: Function which configures the clocks
+ * Moves to bypass, -Commits clock dividers, -puts dpll at speed
+ * -executed from SRAM.
+ * @warning Note: If core unlocks/relocks and SDRAM is running fast already
+ * it gets confused. A reset of the controller gets it back. Taking
+ * away its L3 when its not in self refresh seems bad for it.
+ * Normally, this code runs from flash before SDR is init so that
+ * should be ok.
+ *
+ * @param[in] R1 = SRAM destination address.
+ * @param[in] R0 = CM_CLKEN_PLL-bypass value
+ * @param[in] R1 = CM_CLKSEL1_PLL-m, n, and divider values
+ * @param[in] R2 = CM_CLKSEL_CORE-divider values
+ * @param[in] R3 = CM_IDLEST_CKGEN - addr dpll lock wait
+ *
+ * @return void
+ */
+.global go_to_speed
+ go_to_speed:
+ stmfd sp!, {r4-r6}
+
+ /* move into fast relock bypass */
+ ldr r4, pll_ctl_add
+ str r0, [r4]
+wait1:
+ ldr r5, [r3] /* get status */
+ and r5, r5, #0x1 /* isolate core status */
+ cmp r5, #0x1 /* still locked? */
+ beq wait1 /* if lock, loop */
+
+ /* set new dpll dividers _after_ in bypass */
+ ldr r5, pll_div_add1
+ str r1, [r5] /* set m, n, m2 */
+ ldr r5, pll_div_add2
+ str r2, [r5] /* set l3/l4/.. dividers*/
+ ldr r5, pll_div_add3 /* wkup */
+ ldr r2, pll_div_val3 /* rsm val */
+ str r2, [r5]
+ ldr r5, pll_div_add4 /* gfx */
+ ldr r2, pll_div_val4
+ str r2, [r5]
+ ldr r5, pll_div_add5 /* emu */
+ ldr r2, pll_div_val5
+ str r2, [r5]
+
+#if 0
+ /* FIXME: now prepare GPMC (flash) for new dpll speed
+ * For NOR/NAND/OneNAND boot ->make this as Kconfig?
+ */
+ /* flash needs to be stable when we jump back to it */
+ ldr r6, flash_cfg_offset
+ ldr r5, flash_cfg_addr /* CFG1 */
+ ldr r2, flash_cfg1_val
+ str r2, [r5]
+ add r5, r5, r6 /* CFG2 */
+ ldr r2, flash_cfg2_val
+ str r2, [r5]
+ add r5, r5, r6 /* CFG3 */
+ ldr r2, flash_cfg3_val
+ str r2, [r5]
+ add r5, r5, r6 /* CFG4 */
+ ldr r2, flash_cfg4_val
+ str r2, [r5]
+ add r5, r5, r6 /* CFG5 */
+ ldr r2, flash_cfg5_val
+ str r2, [r5]
+ add r5, r5, r6 /* CFG6 */
+ ldr r2, flash_cfg6_val
+ str r2, [r5]
+#endif /* Debug */
+
+ /* lock DPLL3 and wait a bit */
+ orr r0, r0, #0x7 /* set up for lock mode */
+ str r0, [r4] /* lock */
+ nop /* ARM slow at this point working at sys_clk */
+ nop
+ nop
+ nop
+wait2:
+ ldr r5, [r3] /* get status */
+ and r5, r5, #0x1 /* isolate core status */
+ cmp r5, #0x1 /* still locked? */
+ bne wait2 /* if lock, loop */
+ nop
+ nop
+ nop
+ nop
+ ldmfd sp!, {r4-r6}
+ mov pc, lr /* back to caller, locked */
+
+_go_to_speed: .word go_to_speed
+
+/* these constants need to be close for PIC code */
+/* FIXME: The Nor has to be in the Flash Base CS0 for this condition to happen*/
+#if 0
+flash_cfg_addr:
+ .word GPMC_REG(CONFIG1_0)
+flash_cfg_offset:
+ .word GPMC_REG(CONFIG2_0) - GPMC_REG(CONFIG1_0)
+flash_cfg1_val:
+ .word CONFIG_VALUE_GPMC_CONFIG1
+flash_cfg2_val:
+ .word CONFIG_VALUE_GPMC_CONFIG2
+flash_cfg3_val:
+ .word CONFIG_VALUE_GPMC_CONFIG3
+flash_cfg4_val:
+ .word CONFIG_VALUE_GPMC_CONFIG4
+flash_cfg5_val:
+ .word CONFIG_VALUE_GPMC_CONFIG5
+flash_cfg6_val:
+ .word CONFIG_VALUE_GPMC_CONFIG6
+#endif
+pll_ctl_add:
+ .word CM_CLKEN_PLL
+pll_div_add1:
+ .word CM_CLKSEL1_PLL
+pll_div_add2:
+ .word CM_CLKSEL_CORE
+pll_div_add3:
+ .word CM_CLKSEL_WKUP
+pll_div_val3:
+ .word (WKUP_RSM << 1)
+pll_div_add4:
+ .word CM_CLKSEL_GFX
+pll_div_val4:
+ .word (GFX_DIV << 0)
+pll_div_add5:
+ .word CM_CLKSEL1_EMU
+pll_div_val5:
+ .word CLSEL1_EMU_VAL
+
+#endif /* OMAP3_CLOCK_COPY_SRAM */
+
+ /* the literal pools origin */
+ .ltorg
+
+/* DPLL(1-4) PARAM TABLES */
+/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal
+ * OPP (1.2V). The fields are defined according to dpll_param
+ * struct(omap3_clock.c). MAX index is as per omap3_clock.h
+ */
+
+mpu_dpll_param:
+/* 12MHz */
+/* ES2 */
+.word 0x0FA,0x05,0x07,0x01
+
+/* 13MHz */
+/* ES2 */
+.word 0x1F4,0x0C,0x03,0x01
+
+/* 19.2MHz */
+/* ES2 */
+.word 0x271,0x17,0x03,0x01
+
+/* 26MHz */
+/* ES2 */
+.word 0x0FA,0x0C,0x07,0x01
+
+/* 38.4MHz */
+/* ES2 */
+.word 0x271,0x2F,0x03,0x01
+
+.globl get_mpu_dpll_param
+get_mpu_dpll_param:
+ adr r0, mpu_dpll_param
+ mov pc, lr
+
+iva_dpll_param:
+/* 12MHz */
+/* ES2 */
+.word 0x0B4,0x05,0x07,0x01
+
+/* 13MHz */
+/* ES2 */
+.word 0x168,0x0C,0x03,0x01
+
+/* 19.2MHz */
+/* ES2 */
+.word 0x0E1,0x0B,0x06,0x01
+
+/* 26MHz */
+/* ES2 */
+.word 0x0B4,0x0C,0x07,0x01
+
+/* 38.4MHz */
+/* ES2 */
+.word 0x0E1,0x17,0x06,0x01
+
+.globl get_iva_dpll_param
+get_iva_dpll_param:
+ adr r0, iva_dpll_param
+ mov pc, lr
+
+core_dpll_param:
+/* 12MHz */
+/* ES2 */
+.word 0x0A6,0x05,0x07,0x01
+
+/* 13MHz */
+/* ES2 */
+.word 0x14C,0x0C,0x03,0x01
+
+/* 19.2MHz */
+/* ES2 */
+.word 0x19F,0x17,0x03,0x01
+
+/* 26MHz */
+/* ES2 */
+.word 0x0A6,0x0C,0x07,0x01
+
+/* 38.4MHz */
+/* ES2 */
+.word 0x19F,0x2F,0x03,0x01
+
+.globl get_core_dpll_param
+get_core_dpll_param:
+ adr r0, core_dpll_param
+ mov pc, lr
+
+/* PER DPLL values are same for both ES1 and ES2 */
+per_dpll_param:
+/* 12MHz */
+.word 0xD8,0x05,0x07,0x09
+
+/* 13MHz */
+.word 0x1B0,0x0C,0x03,0x09
+
+/* 19.2MHz */
+.word 0xE1,0x09,0x07,0x09
+
+/* 26MHz */
+.word 0xD8,0x0C,0x07,0x09
+
+/* 38.4MHz */
+.word 0xE1,0x13,0x07,0x09
+
+.globl get_per_dpll_param
+get_per_dpll_param:
+ adr r0, per_dpll_param
+ mov pc, lr
Index: u-boot-v2.git/arch/arm/mach-omap/s32k_clksource.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ u-boot-v2.git/arch/arm/mach-omap/s32k_clksource.c 2008-05-20 17:47:25.000000000 -0500
@@ -0,0 +1,80 @@
+/**
+ * @file
+ * @brief Provide @ref clocksource functionality for OMAP
+ *
+ * FileName: arch/arm/mach-omap/s32k_clksource.c
+ *
+ * @ref clocksource provides a neat architecture. all we do is
+ * To loop in with Sync 32Khz clock ticking away at 32768hz on OMAP.
+ * Sync 32Khz clock is an always ON clock.
+ *
+ */
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ * Nishanth Menon <x0nishan at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <clock.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/silicon.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/timers.h>
+#include <asm/arch/sys_info.h>
+#include <asm/arch/syslib.h>
+
+/**
+ * @brief Provide a simple clock read
+ *
+ * Nothing is simpler.. read direct from clock and provide it
+ * to the caller.
+ *
+ * @return S32K clock counter
+ */
+static uint64_t s32k_clocksource_read(void)
+{
+ return __raw_readl(S32K_CR);
+}
+
+/* A bit obvious isn't it? */
+static struct clocksource s32k_cs = {
+ .read = s32k_clocksource_read,
+ .mask = 0xffffffff,
+ .shift = 10,
+};
+
+/**
+ * @brief Initialize the Clock
+ *
+ * There is nothing to do on OMAP as SYNC32K clock is
+ * always on, and we do a simple data structure initialization.
+ * 32K clock gives 32768 ticks a seconds
+ *
+ * @return result of @ref init_clock
+ */
+static int s32k_clocksource_init(void)
+{
+ s32k_cs.mult = clocksource_hz2mult(S32K_FREQUENCY, s32k_cs.shift);
+
+ return init_clock(&s32k_cs);
+}
+
+/* Run me at boot time */
+core_initcall(s32k_clocksource_init);
Index: u-boot-v2.git/include/asm-arm/arch-omap/omap3-clock.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ u-boot-v2.git/include/asm-arm/arch-omap/omap3-clock.h 2008-05-20 17:53:07.000000000 -0500
@@ -0,0 +1,124 @@
+/**
+ * @file
+ * @brief Contains the PRM and CM definitions
+ *
+ * FileName: include/asm-arm/arch-omap/omap3-clock.h
+ *
+ * Originally from http://linux.omap.com/pub/bootloader/3430sdp/u-boot-v1.tar.gz
+ *
+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2 at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OMAP343X_CLOCKS_H_
+#define _OMAP343X_CLOCKS_H_
+
+/** CM Clock Regs Wrapper */
+#define CM_REG(REGNAME) (OMAP_CM_BASE + CM_##REGNAME)
+
+#define CM_FCLKEN_IVA2 0X0000
+#define CM_CLKEN_PLL_IVA2 0X0004
+#define CM_IDLEST_PLL_IVA2 0X0024
+#define CM_CLKSEL1_PLL_IVA2 0X0040
+#define CM_CLKSEL2_PLL_IVA2 0X0044
+#define CM_CLKEN_PLL_MPU 0X0904
+#define CM_IDLEST_PLL_MPU 0X0924
+#define CM_CLKSEL1_PLL_MPU 0X0940
+#define CM_CLKSEL2_PLL_MPU 0X0944
+#define CM_FCLKEN1_CORE 0X0A00
+#define CM_ICLKEN1_CORE 0X0A10
+#define CM_ICLKEN2_CORE 0X0A14
+#define CM_CLKSEL_CORE 0X0A40
+#define CM_FCLKEN_GFX 0X0B00
+#define CM_ICLKEN_GFX 0X0B10
+#define CM_CLKSEL_GFX 0X0B40
+#define CM_FCLKEN_WKUP 0X0C00
+#define CM_ICLKEN_WKUP 0X0C10
+#define CM_CLKSEL_WKUP 0X0C40
+#define CM_IDLEST_WKUP 0X0C20
+#define CM_CLKEN_PLL 0X0D00
+#define CM_IDLEST_CKGEN 0X0D20
+#define CM_CLKSEL1_PLL 0X0D40
+#define CM_CLKSEL2_PLL 0X0D44
+#define CM_CLKSEL3_PLL 0X0D48
+#define CM_FCLKEN_DSS 0X0E00
+#define CM_ICLKEN_DSS 0X0E10
+#define CM_CLKSEL_DSS 0X0E40
+#define CM_FCLKEN_CAM 0X0F00
+#define CM_ICLKEN_CAM 0X0F10
+#define CM_CLKSEL_CAM 0X0f40
+#define CM_FCLKEN_PER 0X1000
+#define CM_ICLKEN_PER 0X1010
+#define CM_CLKSEL_PER 0X1040
+#define CM_CLKSEL1_EMU 0X1140
+
+/** PRM Clock Regs */
+#define PRM_REG(REGNAME) (OMAP_PRM_BASE + PRM_##REGNAME)
+#define PRM_CLKSEL 0x0D40
+#define PRM_RSTCTRL 0x1250
+#define PRM_CLKSRC_CTRL 0x1270
+
+/*************** Clock Values */
+#define PLL_STOP 1 /* PER & IVA */
+#define PLL_LOW_POWER_BYPASS 5 /* MPU, IVA & CORE */
+#define PLL_FAST_RELOCK_BYPASS 6 /* CORE */
+#define PLL_LOCK 7 /* MPU, IVA, CORE & PER */
+
+/* The following configurations are OPP and SysClk value independant
+ * and hence are defined here.
+ */
+
+/* CORE DPLL */
+#define CORE_M3X2 2 /* 332MHz : CM_CLKSEL1_EMU */
+#define CORE_SSI_DIV 3 /* 221MHz : CM_CLKSEL_CORE */
+#define CORE_FUSB_DIV 2 /* 41.5MHz: */
+#define CORE_L4_DIV 2 /* 83MHz : L4 */
+#define CORE_L3_DIV 2 /* 166MHz : L3 {DDR} */
+#define GFX_DIV 2 /* 83MHz : CM_CLKSEL_GFX */
+#define WKUP_RSM 2 /* 41.5MHz: CM_CLKSEL_WKUP */
+
+/* PER DPLL */
+#define PER_M6X2 3 /* 288MHz: CM_CLKSEL1_EMU */
+#define PER_M5X2 4 /* 216MHz: CM_CLKSEL_CAM */
+#define PER_M4X2 9 /* 96MHz : CM_CLKSEL_DSS-dss1 */
+#define PER_M3X2 16 /* 54MHz : CM_CLKSEL_DSS-tv */
+
+#define CLSEL1_EMU_VAL ((CORE_M3X2 << 16) | (PER_M6X2 << 24) | (0x0a50))
+
+#define MAX_SIL_INDEX 1
+
+#ifndef __ASSEMBLY__
+void prcm_init(void);
+/* Used to index into DPLL parameter tables -See TRM for further details */
+struct dpll_param {
+ unsigned int m;
+ unsigned int n;
+ unsigned int fsel;
+ unsigned int m2;
+};
+/* External functions see omap3_clock_core.S */
+extern struct dpll_param *get_mpu_dpll_param(void);
+extern struct dpll_param *get_iva_dpll_param(void);
+extern struct dpll_param *get_core_dpll_param(void);
+extern struct dpll_param *get_per_dpll_param(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* endif _OMAP343X_CLOCKS_H_ */
Index: u-boot-v2.git/include/asm-arm/arch-omap/clocks.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ u-boot-v2.git/include/asm-arm/arch-omap/clocks.h 2008-05-20 17:47:25.000000000 -0500
@@ -0,0 +1,48 @@
+/**
+ * @file
+ * @brief Generic Clock wrapper header.
+ *
+ * FileName: include/asm-arm/arch-omap/clocks.h
+ *
+ * This includes each of the architecture Clock definitions under it.
+ *
+ * Originally from http://linux.omap.com/pub/bootloader/3430sdp/u-boot-v1.tar.gz
+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2 at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __OMAP_CLOCKS_H_
+#define __OMAP_CLOCKS_H_
+
+#define LDELAY 12000000
+
+/* Standard defines for Various clocks */
+#define S12M 12000000
+#define S13M 13000000
+#define S19_2M 19200000
+#define S24M 24000000
+#define S26M 26000000
+#define S38_4M 38400000
+
+#ifdef CONFIG_ARCH_OMAP3
+#include <asm/arch/omap3-clock.h>
+#endif
+
+#endif /* __OMAP_CLOCKS_H_ */
More information about the U-Boot
mailing list