[U-Boot-Users] [PATCH] MMC: Consolidate MMC/SD command definitions

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Wed May 21 23:32:11 CEST 2008


>  		MMC_CMDAT_R1 | MMC_CMDAT_READ | MMC_CMDAT_BLOCK |
>  		MMC_CMDAT_DATA_EN);
>  
> @@ -568,7 +568,7 @@ mmc_init(int verbose)
>  	MMC_SPI = MMC_SPI_DISABLE;
>  
>  	/* reset */
> -	mmc_cmd(MMC_CMD_RESET, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0);
> +	mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0);
>  	udelay(200000);
>  	retries = 3;
>  	while (retries--) {
> @@ -578,7 +578,7 @@ mmc_init(int verbose)
>  			break;
>  		}
>  
> -		resp = mmc_cmd(SD_CMD_APP_OP_COND, 0x0020, 0, MMC_CMDAT_R3 | (retries < 2 ? 0 : MMC_CMDAT_INIT));	/* Select 3.2-3.3 and 3.3-3.4V */
> +		resp = mmc_cmd(SD_CMD_APP_SEND_OP_COND, 0x0020, 0, MMC_CMDAT_R3 | (retries < 2 ? 0 : MMC_CMDAT_INIT));	/* Select 3.2-3.3 and 3.3-3.4V */
Please split it
>  		if (resp[0] & 0x80000000) {
>  			mmc_dev.if_type = IF_TYPE_SD;
>  			debug("Detected SD card\n");
> @@ -616,7 +616,7 @@ mmc_init(int verbose)
>  		memcpy(cid_resp, resp, sizeof(cid_resp));
>  
>  		/* MMC exists, get CSD too */
> -		resp = mmc_cmd(MMC_CMD_SET_RCA, 0, 0, MMC_CMDAT_R1);
> +		resp = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, 0, 0, MMC_CMDAT_R1);
>  		if (IF_TYPE_SD == mmc_dev.if_type)
>  			rca = ((resp[0] & 0xffff0000) >> 16);
>  		resp = mmc_cmd(MMC_CMD_SEND_CSD, rca, 0, MMC_CMDAT_R2);
> diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h
> index b9304b1..9954680 100644
> --- a/include/asm-arm/arch-pxa/mmc.h
> +++ b/include/asm-arm/arch-pxa/mmc.h
> @@ -110,23 +110,6 @@
>  #define MMC_DEFAULT_RCA			1
>  
>  #define MMC_BLOCK_SIZE			512
> -#define MMC_CMD_RESET			0
> -#define MMC_CMD_SEND_OP_COND		1
> -#define MMC_CMD_ALL_SEND_CID 		2
> -#define MMC_CMD_SET_RCA			3
> -#define MMC_CMD_SELECT_CARD		7
> -#define MMC_CMD_SEND_CSD 		9
> -#define MMC_CMD_SEND_CID 		10
> -#define MMC_CMD_SEND_STATUS		13
> -#define MMC_CMD_SET_BLOCKLEN		16
Best Regards,
J




More information about the U-Boot mailing list