[U-Boot-Users] problem with upgrading u-boot version

[Gary Jennejohn]

On Thu, 22 May 2008 09:23:44 -0400
"Stuart Wood" <stuart.wood at labxtechnologies.com> wrote:

> Hi All,
> 
> I'm currently porting our u-boot implementation that is about 2 years old
> to the current git repository, and I've hit a snag during linking.
> 
> It can't find my 'board_nand_init' function. It defined in my nand.c and it
> is being compiled. So what could I have missed in reconfiguring my board?
> 
> I'm getting this error:
> 
> make[1]: Leaving directory `/home/stuart/ArmLinux/u-boot_git/board/mix_evm'
> UNDEF_SYM=`arm-linux-objdump -x board/mix_evm/libmix_evm.a
> lib_generic/libgeneric.a cpu/arm920t/libarm920t.a
> cpu/arm920t/ep93xx/libep93xx.a lib_arm/libarm.a fs/cramfs/libcramfs.a
> fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a
> fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a
> drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a
> drivers/dma/libdma.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a
> drivers/input/libinput.a drivers/misc/libmisc.a drivers/mtd/libmtd.a
> drivers/mtd/nand/libnand.a drivers/mtd/nand_legacy/libnand_legacy.a
> drivers/mtd/onenand/libonenand.a drivers/net/libnet.a
> drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a
> drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a
> drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a
> common/libcommon.a libfdt/libfdt.a api/libapi.a post/libpost.a | \
>                 sed  -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
>                 cd /home/stuart/ArmLinux/u-boot_git && arm-linux-ld -Bstatic
> -T /home/stuart/ArmLinux/u-boot_git/board/mix_evm/u-boot.lds  -Ttext
> 0xE5400000 $UNDEF_SYM cpu/arm920t/start.o \
>                         --start-group lib_generic/libgeneric.a
> cpu/arm920t/libarm920t.a cpu/arm920t/ep93xx/libep93xx.a lib_arm/libarm.a
> fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a
> fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a
> drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a
> drivers/dma/libdma.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a
> drivers/input/libinput.a drivers/misc/libmisc.a drivers/mtd/libmtd.a
> drivers/mtd/nand/libnand.a drivers/mtd/nand_legacy/libnand_legacy.a
> drivers/mtd/onenand/libonenand.a drivers/net/libnet.a
> drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a
> drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a
> drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a
> common/libcommon.a libfdt/libfdt.a api/libapi.a post/libpost.a
> board/mix_evm/libmix_evm.a --end-group -L
> /opt/buildroot/lib/gcc/arm-linux-uclibc/3.4.6 -lgcc \
>                         -Map u-boot.map -o u-boot
> drivers/mtd/nand/libnand.a(nand.o): In function `nand_init_chip':
> /home/stuart/ArmLinux/u-boot_git/drivers/mtd/nand/nand.c:50: undefined
> reference to `board_nand_init'
> make: *** [u-boot] Error 1
> 

How big is your nand.o?  Do you have an ifdef in the file which is
not defined and perhaps preventing the code from being compiled?

---
Gary Jennejohn