[U-Boot-Users] [PATCH] Add support for Marvell 88E1118 phy to drivers/net/tsec.c
Ben Warren
biggerbadderben at gmail.com
Fri May 23 08:21:41 CEST 2008
Hi Ron,
Ron Madrid wrote:
> Add support for Marvell 88E1118 phy to
> drivers/net/tsec.c
>
> Signed-off-by: Ron Madrid <ron_madrid at sbcglobal.net>
>
> --- clean_u-boot-1.3.3/drivers/net/tsec.c 2008-05-19
> 03:47:11.000000000 -0700
> +++ u-boot-1.3.3/drivers/net/tsec.c 2008-05-20
> 12:40:14.000000000 -0700
>
The content of this patch looks OK, but the patch itself is mangled.
Please use git tools to create your patches, then re-submit.
> @@ -1128,6 +1128,36 @@ struct phy_info
> phy_info_M88E1111S = {
> },
> };
>
> +struct phy_info phy_info_M88E1118 = {
> + 0x01410e1,
> + "Marvell 88E1118",
> + 4,
> + (struct phy_cmd[]){ /* config */
> + /* Reset and configure the PHY */
> + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> + {0x16, 0x0002, NULL}, /* Change Page Number */
> + {0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */
> + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
> + {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
> + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* startup */
> + {0x16, 0x0000, NULL}, /* Change Page Number */
> + /* Status is read once to clear old link state */
> + {MIIM_STATUS, miim_read, NULL},
> + /* Auto-negotiate */
> + /* Read the status */
> + {MIIM_88E1011_PHY_STATUS, miim_read,
> + &mii_parse_88E1011_psr},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* shutdown */
> + {miim_end,}
> + },
> +};
> +
> static unsigned int m88e1145_setmode(uint mii_reg,
> struct tsec_private *priv)
> {
> uint mii_data = read_phy_reg(priv, mii_reg);
> @@ -1492,6 +1522,7 @@ struct phy_info *phy_info[] = {
> &phy_info_BCM5464S,
> &phy_info_M88E1011S,
> &phy_info_M88E1111S,
> + &phy_info_M88E1118,
> &phy_info_M88E1145,
> &phy_info_M88E1149S,
> &phy_info_dm9161,
>
>
>
regards,
Ben
More information about the U-Boot
mailing list