[U-Boot-Users] [PATCH v2] 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it

[Kumar Gala]

Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---

Fix warning that the first version introduced.

- k

 cpu/mpc85xx/cpu.c |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 9873383..58d23f4 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -75,8 +75,12 @@ int checkcpu (void)
 	uint ver;
 	uint major, minor;
 	int i;
-	u32 ddr_ratio;
+#ifdef CONFIG_DDR_CLK_FREQ
 	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+#else
+	u32 ddr_ratio = 0;
+#endif

 	svr = get_svr();
 	ver = SVR_SOC_VER(svr);
@@ -118,7 +122,7 @@ int checkcpu (void)
 	puts("Clock Configuration:\n");
 	printf("       CPU:%4lu MHz, ", DIV_ROUND_UP(sysinfo.freqProcessor,1000000));
 	printf("CCB:%4lu MHz,\n", DIV_ROUND_UP(sysinfo.freqSystemBus,1000000));
-	ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+
 	switch (ddr_ratio) {
 	case 0x0:
 		printf("       DDR:%4lu MHz (%lu MT/s data rate), ",
-- 
1.5.4.5