[U-Boot-Users] [PATCH] Fix lwmon5 dsp POST sequence.

sascha.laue at liebherr.com sascha.laue at liebherr.com
Fri May 30 09:48:28 CEST 2008


From: Sascha Laue <sascha.laue at liebherr.com>


Signed-off-by: Sascha Laue <sascha.laue at liebherr.com>
---
 post/board/lwmon5/dsp.c |   21 +++++++++++++++++++--
 1 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/post/board/lwmon5/dsp.c b/post/board/lwmon5/dsp.c
index a96ac7d..bc12e42 100644
--- a/post/board/lwmon5/dsp.c
+++ b/post/board/lwmon5/dsp.c
@@ -33,20 +33,37 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define DSP_STATUS_REG 0xC4000008
+#define DSP_STATUS_REG     0xC4000008
+#define FPGA_STATUS_REG    0xC400000C
 
 int dsp_post_test(int flags)
 {
+	uint   old_value;
 	uint   read_value;
 	int    ret;
+	
+	/* momorize fpga status */
+	old_value = in_be32((void *)FPGA_STATUS_REG);
+	/* enable outputs */
+	out_be32((void *)FPGA_STATUS_REG, 0x30);
+	
+	/* generate sync signal */
+	out_be32((void *)DSP_STATUS_REG, 0x300);
+	udelay(5);
+	out_be32((void *)DSP_STATUS_REG, 0);
+	udelay(500);
 
+	/* read status */	
 	ret = 0;
 	read_value = in_be32((void *)DSP_STATUS_REG) & 0x3;
-	if (read_value != 0x3) {
+	if (!(read_value & 0x3)) {
 		post_log("\nDSP status read %08X\n", read_value);
 		ret = 1;
 	}
 
+	/* restore fpga status */
+	out_be32((void *)FPGA_STATUS_REG, old_value);
+
 	return ret;
 }
 
-- 
1.5.2.4





More information about the U-Boot mailing list