[U-Boot] [PATCH 7/7 v7] ARM: Add support for S3C6400 based SMDK6400 board

[Wolfgang Denk]

Dear Guennadi Liakhovetski,

In message <Pine.LNX.4.64.0808111732140.30591 at axis700.grange> you wrote:
> SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
> driver for it too. The board can also boot from the NOR flash, but due to
> hardware limitations it can only address 64KiB on it, which is not enough
> for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.

Can you please check the compiler options? This is what I get with
ELDK 4.1 for ARM:

	-> ./MAKEALL smdk6400
	cc1: error: invalid option 'eabi'
	cc1: error: invalid option 'string'
	...


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"...all the  good  computer  designs  are  bootlegged;  the  formally
planned  products,  if  they  are built at all, are dogs!" - David E.
Lundstrom, "A Few Good Men From Univac", MIT Press, 1987