[U-Boot] [PATCH v2 10/17] Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()

Ben Warren biggerbadderben at gmail.com
Mon Sep 1 07:57:35 CEST 2008


    Affected boards:
        AmigaOneG3SE

    Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben at gmail.com>
---
 board/MAI/AmigaOneG3SE/AmigaOneG3SE.c |    9 +++++++++
 board/MAI/AmigaOneG3SE/enet.c         |    1 +
 include/netdev.h                      |    1 +
 net/eth.c                             |    4 ----
 4 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
index e118563..4d44001 100644
--- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
+++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
@@ -26,6 +26,7 @@
 #include <common.h>
 #include <command.h>
 #include <pci.h>
+#include <netdev.h>
 #include "articiaS.h"
 #include "memio.h"
 #include "via686.h"
@@ -111,3 +112,11 @@ void pci_init_board (void)
 	articiaS_pci_init ();
 #endif
 }
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_3COM)
+	eth_3com_initialize(bis);
+#endif
+	return 0;
+}
diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c
index 5a90cc5..0b4dfe6 100644
--- a/board/MAI/AmigaOneG3SE/enet.c
+++ b/board/MAI/AmigaOneG3SE/enet.c
@@ -28,6 +28,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 
diff --git a/include/netdev.h b/include/netdev.h
index 666d12d..0c16dd6 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -42,6 +42,7 @@ int cpu_eth_init(bd_t *bis);
 
 /* Driver initialization prototypes */
 int bfin_EMAC_initialize(bd_t *bis);
+int eth_3com_initialize (bd_t * bis);
 int greth_initialize(bd_t *bis);
 void gt6426x_eth_initialize(bd_t *bis);
 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
diff --git a/net/eth.c b/net/eth.c
index 99efa16..c4d7b63 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -43,7 +43,6 @@ extern int au1x00_enet_initialize(bd_t*);
 extern int dc21x4x_initialize(bd_t*);
 extern int e1000_initialize(bd_t*);
 extern int eepro100_initialize(bd_t*);
-extern int eth_3com_initialize(bd_t*);
 extern int fec_initialize(bd_t*);
 extern int inca_switch_initialize(bd_t*);
 extern int mpc5xxx_fec_initialize(bd_t*);
@@ -219,9 +218,6 @@ int eth_initialize(bd_t *bis)
 #ifdef CONFIG_TULIP
 	dc21x4x_initialize(bis);
 #endif
-#ifdef CONFIG_3COM
-	eth_3com_initialize(bis);
-#endif
 	if (!eth_devices) {
 		puts ("No ethernet found.\n");
 		show_boot_progress (-64);
-- 
1.5.4.3



More information about the U-Boot mailing list