[U-Boot] MACB and DM9000 support for AT91SAM9260

[Frank v/d Schoot]

Hi All,

We have a board with 2 ethernet ports: one on the macb and the other on a
dm9000-chip. Got them both working under linux but the dm9000 doesn't get a
MAC-address assigned now. I would like to give the dm9000 its MAC-address in
U-Boot via a environment-variable. Because I'm new to U-Boot, I do not see
how I can initialise the dm9000 (eth_init()) and macb (which is initialised
via eth_init() in eth.c). To me it looks like macb & dm9000 driver are using
a different type of driver concept. How can this problem be tackled?

Greetings Frank