[U-Boot] [PATCH] 440spe MQ initialization

Prodyut Hazarika phazarika at amcc.com
Tue Sep 23 17:37:44 CEST 2008


Hi Yuri,

> Is it OK, or should we remove these strings from the Linux driver,
> assuming U-Boot has already done this ?

Please go ahead and remove these from the linux driver. And I think this driver has not been submitted to the powerpc tree, since I still don't see it in Josh's or Linus's tree.
 
Thanks,
Prodyut
 


> From: Stefan Roese [mailto:sr at denx.de]
> Sent: Tue 9/23/2008 2:43 AM
> To: Yuri Tikhonov
> Cc: u-boot at lists.denx.de; Prodyut Hazarika; Olga Buchonina
> Subject: Re: [U-Boot] [PATCH] 440spe MQ initialization

> On Tuesday 23 September 2008, Yuri Tikhonov wrote:
>>  BTW, when I said "recommended by AMCC" in the patch description I
>> referred to the following information forwarded to me by Wolfgang
>> Denk on Tue Mar 18 2008:
>>
>> ---
>> Dear Yuri,
>>
>> here is some additional (and hopefully helpful) information from AMCC
>>
>> regarding the observed hangs on the katmai board:
>> > If possible, can you please check if you still see the lock up when
>> > you program MQ as follows:
>> > set value in HB and if you are using LL also as follows:
>> > MQ0_CF1H  = 0x80001C80
>> > MQ0_CF1L  =  0x80001C80
>> > Additionally, make sure that your PLB settings are:
>> > PLB0_ACR  = 0xDF000000 ( 4 deep read and 2 deep write)
>> > PLB1_ACR =  0xDF000000 ( 4 deep read and 2 deep write)
>> > Please let me know if this fixes the issue.
>> > I also would like to know how you are programming your DMA and how
>> > is the traffic is pipelined.
>> > Regards,
>> > Olga Buchonina
>> > AMCC PowerPC Applications Engineering

> Understood. I just would like to see an ACK from AMCC on this since they just
> updated this MQ init code.

> Best regards,
> Stefan

> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
> =====================================================================


 --
 Yuri Tikhonov, Senior Software Engineer
 Emcraft Systems, www.emcraft.com




More information about the U-Boot mailing list