[U-Boot] I2C source clock frequency on MPC8544

Wolfgang Grandegger wg at grandegger.com
Thu Sep 25 15:20:14 CEST 2008


Hello,

the I2C source clock frequency for the MPC8544 is determined in
cpu/mpc85xx/speed.c:

  #elif defined(CONFIG_MPC8544)
        /*
         * On the 8544, the I2C clock is the same as the SEC clock.  This can be
         * either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
         * 4.4.3.3 of the 8544 RM.  Note that this might actually work for all
         * 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the
         * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
         */
        if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
                gd->i2c1_clk = sys_info.freqSystemBus / 3;
        else
                gd->i2c1_clk = sys_info.freqSystemBus / 2;
 
On our MPC8544 the MPC85xx_PORDEVSR2_SEC_CFG is set and the 
diver 3 therefore used. But that seems to be wrong. Measurements show,
that the used divider is 2. Any idea what's going wrong? Is there an
errata for the MPC8544?

Wolfgang.


More information about the U-Boot mailing list