[U-Boot] [PATCH 1/2] Fix the incorrect DDR clk freq reporting on 8536DS

[Jason Jin]

On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
The display is still sync mode DDR freq. This patch try to fix
this. The display DDR freq is now the actual freq in both
sync and async mode.

Signed-off-by: Jason Jin <Jason.jin at freescale.com>
---
 cpu/mpc85xx/cpu.c            |    3 ++-
 cpu/mpc85xx/speed.c          |    3 ++-
 include/asm-ppc/immap_85xx.h |    7 +++++++
 include/configs/MPC8536DS.h  |    2 +-
 4 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 67e81c0..f15b0a8 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -85,7 +85,8 @@ int checkcpu (void)
 	struct cpu_type *cpu;
 #ifdef CONFIG_DDR_CLK_FREQ
 	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+	u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+		>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 #else
 	u32 ddr_ratio = 0;
 #endif
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 1cda1e3..485ba20 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -54,7 +54,8 @@ void get_sys_info (sys_info_t * sysInfo)
 
 #ifdef CONFIG_DDR_CLK_FREQ
 	{
-		u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+		u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+			>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 		if (ddr_ratio != 0x7)
 			sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
 	}
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 559d6ea..50c9dde 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1552,6 +1552,13 @@ typedef struct par_io {
  */
 typedef struct ccsr_gur {
 	uint	porpllsr;	/* 0xe0000 - POR PLL ratio status register */
+#ifdef CONFIG_MPC8536
+#define MPC85xx_PORPLLSR_DDR_RATIO	0x3e000000
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	25
+#else
+#define MPC85xx_PORPLLSR_DDR_RATIO	0x00003e00
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	9
+#endif
 	uint	porbmsr;	/* 0xe0004 - POR boot mode status register */
 #define MPC85xx_PORBMSR_HA		0x00070000
 	uint	porimpscr;	/* 0xe0008 - POR I/O impedance status and control register */
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 365818c..310c669 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -59,7 +59,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #endif
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0) /* sysclk for MPC85xx */
-/* #define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0) /\* ddrclk for MPC85xx *\/ FIXME-8536*/
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0)
 #define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */
 #define CONFIG_GET_CLK_FROM_ICS307	  /* decode sysclk and ddrclk freq
 					     from ICS307 instead of switches */
-- 
1.5.4