[U-Boot] [PATCH v2] PQ2FADS: Enable PCI.
Scott Wood
scottwood at freescale.com
Fri Apr 3 22:26:45 CEST 2009
PCI on PQ2FADS is very similar to PCI on MPC8272ADS.
Signed-off-by: Scott Wood <scottwood at freescale.com>
---
Removed an inadvertent change to an 8272ads ifdef.
cpu/mpc8260/pci.c | 2 ++
include/configs/MPC8260ADS.h | 17 +++++++++++++----
2 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c
index f1e9bb4..6a14ba4 100644
--- a/cpu/mpc8260/pci.c
+++ b/cpu/mpc8260/pci.c
@@ -258,6 +258,8 @@ void pci_mpc8250_init (struct pci_controller *hose)
immap->im_siu_conf.sc_siumcr =
(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
| SIUMCR_LBPC01;
+#elif defined(CONFIG_ADSTYPE) && CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
+/* nothing to do for this board here */
#elif defined CONFIG_MPC8272
immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
~SIUMCR_BBD &
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 21210eb..c75fbb4 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -69,6 +69,13 @@
#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
#define CONFIG_MPC8272 1
+#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
+/*
+ * Actually MPC8275, but the code is littered with ifdefs that
+ * apply to both, or which use this ifdef to assume board-specific
+ * details. :-(
+ */
+#define CONFIG_MPC8272 1
#else
#define CONFIG_MPC8260 1
#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
@@ -178,7 +185,7 @@
#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */
/*PCI*/
-#ifdef CONFIG_MPC8272
+#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_BOOTDELAY 0
@@ -246,7 +253,6 @@
#elif CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
#undef CONFIG_CMD_SDRAM
#undef CONFIG_CMD_I2C
- #undef CONFIG_CMD_PCI
#else
#undef CONFIG_CMD_PCI
@@ -320,7 +326,7 @@
#define CONFIG_SYS_IMMR 0xF0000000
#define CONFIG_SYS_BCSR 0xF4500000
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
+#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
#define CONFIG_SYS_PCI_INT 0xF8200000
#endif
#define CONFIG_SYS_SDRAM_BASE 0x00000000
@@ -415,6 +421,9 @@
#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PCI_INT | 0x1801) /* PCI interrupt controller */
#define CONFIG_SYS_OR3_PRELIM 0xFFFF8010
+#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
+#define CONFIG_SYS_BR8_PRELIM (CONFIG_SYS_PCI_INT | 0x1801) /* PCI interrupt controller */
+#define CONFIG_SYS_OR8_PRELIM 0xFFFF8010
#endif
#define CONFIG_SYS_RMR RMR_CSRE
@@ -449,7 +458,7 @@
#define CONFIG_SYS_RESET_ADDRESS 0x04400000
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
+#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
/* PCI Memory map (if different from default map */
#define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */
--
1.5.6.rc1.6.gc53ad
More information about the U-Boot
mailing list