[U-Boot] Pull request u-boot-blackfin.git

[Wolfgang Denk]

Dear Mike Frysinger,

In message <1238779289-6054-1-git-send-email-vapier at gentoo.org> you wrote:
> The following changes since commit dfc91c33957c95da34e3888dc87912d5c15a7603:
>   Wolfgang Denk (1):
>         Merge branch 'master' of git://git.denx.de/u-boot-arm
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-blackfin.git master
> 
> Mike Frysinger (13):
>       Blackfin: bf548-ezkit: new board port
>       Blackfin: bf527-ezkit: new board port
>       Blackfin: bf538f-ezkit: new board port
>       Blackfin: bf526-ezbrd: new board port
>       Blackfin: bf518f-ezbrd: new board port
>       Blackfin: fix crash when booting from external memory
>       Blackfin: bf537-stamp: split CF/IDE code out into dedicated cf-ide.c
>       Blackfin: convert bfin_sdh to legacy mmc
>       Blackfin: drop newline from OTP help
>       Blackfin: do not delay on output bytes
>       Blackfin: add BF538/BF539 SPI portmux handling
>       Blackfin: bf533-stamp: drop old spi flash driver
>       Blackfin: force all boards to HZ of 1000
> 
>  MAINTAINERS                                 |    5 +
>  MAKEALL                                     |    5 +
>  Makefile                                    |    6 +-
>  board/bf518f-ezbrd/.gitignore               |    1 +
>  board/bf518f-ezbrd/Makefile                 |   57 +++++
>  board/bf518f-ezbrd/bf518f-ezbrd.c           |  101 ++++++++
>  board/bf518f-ezbrd/config.mk                |   32 +++
>  board/bf518f-ezbrd/u-boot.lds.S             |  124 ++++++++++
>  board/bf526-ezbrd/.gitignore                |    1 +
>  board/bf526-ezbrd/Makefile                  |   58 +++++
>  board/bf526-ezbrd/bf526-ezbrd.c             |   77 +++++++
>  board/bf526-ezbrd/config.mk                 |   32 +++
>  board/bf526-ezbrd/status-led.c              |   56 +++++
>  board/bf526-ezbrd/u-boot.lds.S              |  124 ++++++++++
>  board/bf527-ezkit/.gitignore                |    1 +
>  board/bf527-ezkit/Makefile                  |   58 +++++
>  board/bf527-ezkit/bf527-ezkit.c             |   77 +++++++
>  board/bf527-ezkit/config.mk                 |   32 +++
>  board/bf527-ezkit/u-boot.lds.S              |  124 ++++++++++
>  board/bf527-ezkit/video.c                   |  317 ++++++++++++++++++++++++++
>  board/bf533-stamp/Makefile                  |    1 -
>  board/bf533-stamp/spi_flash.c               |    2 -
>  board/bf537-stamp/Makefile                  |    1 +
>  board/bf537-stamp/bf537-stamp.c             |   57 +-----
>  board/bf537-stamp/ide-cf.c                  |   66 ++++++
>  board/bf538f-ezkit/.gitignore               |    1 +
>  board/bf538f-ezkit/Makefile                 |   57 +++++
>  board/bf538f-ezkit/bf538f-ezkit.c           |   27 +++
>  board/bf538f-ezkit/config.mk                |   33 +++
>  board/bf538f-ezkit/u-boot.lds.S             |  143 ++++++++++++
>  board/bf548-ezkit/.gitignore                |    1 +
>  board/bf548-ezkit/Makefile                  |   58 +++++
>  board/bf548-ezkit/bf548-ezkit.c             |   79 +++++++
>  board/bf548-ezkit/config.mk                 |   37 +++
>  board/bf548-ezkit/u-boot.lds.S              |  124 ++++++++++
>  board/bf548-ezkit/video.c                   |  327 +++++++++++++++++++++++++++
>  common/cmd_otp.c                            |    2 +-
>  cpu/blackfin/initcode.c                     |    9 +
>  cpu/blackfin/serial.c                       |    4 -
>  cpu/blackfin/start.S                        |    2 +
>  drivers/mmc/bfin_sdh.c                      |   14 +-
>  drivers/spi/bfin_spi.c                      |   18 ++
>  include/asm-blackfin/blackfin-config-post.h |    8 +-
>  include/configs/bf518f-ezbrd.h              |  147 ++++++++++++
>  include/configs/bf526-ezbrd.h               |  190 ++++++++++++++++
>  include/configs/bf527-ezkit.h               |  172 ++++++++++++++
>  include/configs/bf538f-ezkit.h              |  139 ++++++++++++
>  include/configs/bf548-ezkit.h               |  211 +++++++++++++++++
>  48 files changed, 3140 insertions(+), 78 deletions(-)
>  create mode 100644 board/bf518f-ezbrd/.gitignore
>  create mode 100644 board/bf518f-ezbrd/Makefile
>  create mode 100644 board/bf518f-ezbrd/bf518f-ezbrd.c
>  create mode 100644 board/bf518f-ezbrd/config.mk
>  create mode 100644 board/bf518f-ezbrd/u-boot.lds.S
>  create mode 100644 board/bf526-ezbrd/.gitignore
>  create mode 100644 board/bf526-ezbrd/Makefile
>  create mode 100644 board/bf526-ezbrd/bf526-ezbrd.c
>  create mode 100644 board/bf526-ezbrd/config.mk
>  create mode 100644 board/bf526-ezbrd/status-led.c
>  create mode 100644 board/bf526-ezbrd/u-boot.lds.S
>  create mode 100644 board/bf527-ezkit/.gitignore
>  create mode 100644 board/bf527-ezkit/Makefile
>  create mode 100644 board/bf527-ezkit/bf527-ezkit.c
>  create mode 100644 board/bf527-ezkit/config.mk
>  create mode 100644 board/bf527-ezkit/u-boot.lds.S
>  create mode 100644 board/bf527-ezkit/video.c
>  delete mode 100644 board/bf533-stamp/spi_flash.c
>  create mode 100644 board/bf537-stamp/ide-cf.c
>  create mode 100644 board/bf538f-ezkit/.gitignore
>  create mode 100644 board/bf538f-ezkit/Makefile
>  create mode 100644 board/bf538f-ezkit/bf538f-ezkit.c
>  create mode 100644 board/bf538f-ezkit/config.mk
>  create mode 100644 board/bf538f-ezkit/u-boot.lds.S
>  create mode 100644 board/bf548-ezkit/.gitignore
>  create mode 100644 board/bf548-ezkit/Makefile
>  create mode 100644 board/bf548-ezkit/bf548-ezkit.c
>  create mode 100644 board/bf548-ezkit/config.mk
>  create mode 100644 board/bf548-ezkit/u-boot.lds.S
>  create mode 100644 board/bf548-ezkit/video.c
>  create mode 100644 include/configs/bf518f-ezbrd.h
>  create mode 100644 include/configs/bf526-ezbrd.h
>  create mode 100644 include/configs/bf527-ezkit.h
>  create mode 100644 include/configs/bf538f-ezkit.h
>  create mode 100644 include/configs/bf548-ezkit.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
egrep patterns are full regular expressions; it uses a fast  determi-
nistic algorithm that sometimes needs exponential space.
- unix manuals