[U-Boot] [PATCH] at91: add support for PM9261 board

[Wolfgang Denk]

Dear Ilko Iliev,

In message <12260566511023-git-send-email-iliev at ronetix.at> you wrote:
> This patch adds support for the PM9261 board of Ronetix GmbH (www.ronetix.at)
> 
> Signed-off-by: Ilko Iliev <iliev at ronetix.at>
> ---
>  MAKEALL                                     |    1 +
>  Makefile                                    |    3 +
>  board/ronetix/pm9261/Makefile               |   60 +++++
>  board/ronetix/pm9261/config.mk              |    1 +
>  board/ronetix/pm9261/pm9261.c               |  352 +++++++++++++++++++++++++
>  board/ronetix/pm9261/pm9261_led.c           |   79 ++++++
>  board/ronetix/pm9261/pm9261_lowlevel_init.S |  368 +++++++++++++++++++++++++++
>  board/ronetix/pm9261/pm9261_nand.c          |   79 ++++++
>  board/ronetix/pm9261/pm9261_partition.c     |   47 ++++
>  include/configs/pm9261.h                    |  266 ++++++++++++++++++++
>  10 files changed, 1265 insertions(+), 0 deletions(-)
>  mode change 100755 => 100644 MAKEALL
>  create mode 100644 board/ronetix/pm9261/Makefile
>  create mode 100644 board/ronetix/pm9261/config.mk
>  create mode 100644 board/ronetix/pm9261/pm9261.c
>  create mode 100644 board/ronetix/pm9261/pm9261_led.c
>  create mode 100644 board/ronetix/pm9261/pm9261_lowlevel_init.S
>  create mode 100644 board/ronetix/pm9261/pm9261_nand.c
>  create mode 100644 board/ronetix/pm9261/pm9261_partition.c
>  create mode 100644 include/configs/pm9261.h

Jean-Christophe says he asked you for a cleaned up / rebased version
of this patch. Will you submit one any time soon?