[U-Boot] Writing a YAFFS image to NAND

[Mike Frysinger]

On Friday 03 April 2009 14:54:06 Scott Wood wrote:
> Peter Barada wrote:
> > Is there support in the 2009.03 version of U-boot to allow writing a
> > YAFFS image created by mkyaffs2image to NAND, including the meta-data in
> > the OOB?
>
> Not that I know of (unless something in cmd_yaffs2.c can do it).
>
> > Looking over the nand write/read commands, they look to ignore the OOB
> > data interleaved in the image (i.e. 2048+16 bytes per page for
> > large-block NAND).  I did see a patch from fmandarino on the list, but
> > that doesn't look to be in the 2009.03 codebase.
>
> That was several years ago; if someone wants to submit a proper patch
> against current u-boot (without the pre-2.6.18 support, or at least with
> the newer format being the default), I'll apply it.  Better yet would be
> a more general mechanism whereby the user specifies how many OOB bytes
> are interleaved in the supplied image, without any specific knowledege
> of yaffs.

i'm in windows atm so i cant post a proper patch, but this link should be 
useful:
http://blackfin.uclinux.org/git/?p=readonly-mirrors/u-
boot.git;a=commitdiff;h=b71bce9d98776f4b5aeecfae151f8961a6ef8e98
-mike