[U-Boot] [U-boot] U-Boot 2009.03 booting problem

Kim Phillips kim.phillips at freescale.com
Thu Apr 9 18:50:27 CEST 2009


On Thu, 9 Apr 2009 05:32:29 -0700 (PDT)
rudresh <rudresh.tk at lntemsys.com> wrote:

> 
> Hi All,
> 
> I am try to use the u-boot version 2009 for MPC8313ERB broad, when i load
> the u-boot.bin to board using JTAG and restart the board at that time its
> not booting properly . its generated following error what may be the
> problem.
> 
> U-Boot 2009.03 (Apr 22 2009 - 04:59:44) MPC83XX
> 
> Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
> 
> CPU:   e300c3, MPC8313E, Rev: 1.0 at 333.333 MHz, CSB: 166.667 MHz
> Board: Freescale MPC8313ERDB
> I2C:   ready
> DRAM:  128 MB
> FLASH: 16 MB
> NAND:  256 MiB
> *** Warning - bad CRC, using default environment
> 
> In:    serial
> Out:   serial
> Err:   serial
> Machine check in kernel mode.
> Caused by (from msr): regs 07f36df0 Unknown values in msr
> NIP: 07FE9474 XER: 00000000 LR: 07FE946C REGS: 07f36df0 TRAP: 0200 DAR:
> 00000000

can you turn on debugging and/or somehow find out what code is at or
around the NIP address above?

Also, how, if any, is this board different from Freescale's
MPC8313ERDB?  earlier you state it is a custom board...

Kim


More information about the U-Boot mailing list