[U-Boot] [PATCH] mtd: nand: new base driver for memory mapped nand devices
Mike Frysinger
vapier at gentoo.org
Sun Apr 12 03:26:42 CEST 2009
The BF537-STAMP Blackfin board had a driver for working with NAND devices
that are simply memory mapped. Since there is nothing Blackfin specific
about this, generalize the driver a bit so that everyone can leverage it.
Signed-off-by: Mike Frysinger <vapier at gentoo.org>
CC: Scott Wood <scottwood at freescale.com>
---
board/bf537-stamp/Makefile | 1 -
board/bf537-stamp/nand.c | 100 -------------------------------------
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/nand_plat.c | 66 ++++++++++++++++++++++++
include/configs/bf537-stamp.h | 43 +++++-----------
include/configs/bfin_adi_common.h | 3 +
6 files changed, 84 insertions(+), 130 deletions(-)
delete mode 100644 board/bf537-stamp/nand.c
create mode 100644 drivers/mtd/nand/nand_plat.c
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index 1dbf406..6da04e3 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a
COBJS-y := $(BOARD).o cmd_bf537led.o
COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o
COBJS-$(CONFIG_CMD_EEPROM) += spi_flash.o
-COBJS-$(CONFIG_CMD_NAND) += nand.o
COBJS-$(CONFIG_POST) += post.o post-memory.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c
deleted file mode 100644
index 181e83d..0000000
--- a/board/bf537-stamp/nand.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-#include <nand.h>
-
-#define CONCAT(a,b,c,d) a ## b ## c ## d
-#define PORT(a,b) CONCAT(pPORT,a,b,)
-
-#ifndef CONFIG_NAND_GPIO_PORT
-#define CONFIG_NAND_GPIO_PORT F
-#endif
-
-/*
- * hardware specific access to control-lines
- */
-static void bfin_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- register struct nand_chip *this = mtd->priv;
- u32 IO_ADDR_W = (u32) this->IO_ADDR_W;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- if (ctrl & NAND_CLE)
- IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_CLE;
- else
- IO_ADDR_W = CONFIG_SYS_NAND_BASE;
- if (ctrl & NAND_ALE)
- IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_ALE;
- else
- IO_ADDR_W = CONFIG_SYS_NAND_BASE;
- this->IO_ADDR_W = (void __iomem *) IO_ADDR_W;
- }
- this->IO_ADDR_R = this->IO_ADDR_W;
-
- /* Drain the writebuffer */
- SSYNC();
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
-}
-
-int bfin_device_ready(struct mtd_info *mtd)
-{
- int ret = (*PORT(CONFIG_NAND_GPIO_PORT, IO) & BFIN_NAND_READY) ? 1 : 0;
- SSYNC();
- return ret;
-}
-
-/*
- * Board-specific NAND initialization. The following members of the
- * argument are board-specific (per include/linux/mtd/nand.h):
- * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
- * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
- * - cmd_ctrl: hardwarespecific function for accesing control-lines
- * - dev_ready: hardwarespecific function for accesing device ready/busy line
- * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
- * only be provided if a hardware ECC is available
- * - ecc.mode: mode of ecc, see defines
- * - chip_delay: chip dependent delay for transfering data from array to
- * read regs (tR)
- * - options: various chip options. They can partly be set to inform
- * nand_scan about special functionality. See the defines for further
- * explanation
- * Members with a "?" were not set in the merged testing-NAND branch,
- * so they are not set here either.
- */
-int board_nand_init(struct nand_chip *nand)
-{
- *PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY;
- *PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY;
- *PORT(CONFIG_NAND_GPIO_PORT, IO_INEN) |= BFIN_NAND_READY;
-
- nand->cmd_ctrl = bfin_hwcontrol;
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->dev_ready = bfin_device_ready;
- nand->chip_delay = 30;
-
- return 0;
-}
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 5974d77..46ad901 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -41,6 +41,7 @@ COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o
COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o
COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
+COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o
endif
COBJS := $(COBJS-y)
diff --git a/drivers/mtd/nand/nand_plat.c b/drivers/mtd/nand/nand_plat.c
new file mode 100644
index 0000000..e39503b
--- /dev/null
+++ b/drivers/mtd/nand/nand_plat.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2006-2009 Analog Devices Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#include <nand.h>
+
+#ifdef NAND_PLAT_WRITE_CMD
+static void cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ NAND_PLAT_WRITE_CMD(cmd, this);
+ else
+ NAND_PLAT_WRITE_ADR(cmd, this);
+
+ /* Drain the writebuffer */
+ sync();
+}
+#else
+# define cmd_ctrl NULL
+#endif
+
+#ifdef NAND_PLAT_DEV_READY
+static int dev_ready(struct mtd_info *mtd)
+{
+ return NAND_PLAT_DEV_READY((struct nand_chip *)mtd->priv);
+}
+#else
+# define dev_ready NULL
+#endif
+
+int board_nand_init(struct nand_chip *nand)
+{
+ NAND_PLAT_INIT();
+
+ nand->cmd_ctrl = cmd_ctrl;
+ nand->dev_ready = dev_ready;
+ nand->ecc.mode = NAND_ECC_SOFT;
+
+ return 0;
+}
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 3e5862d..91159c0 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -136,36 +136,21 @@
/*
* NAND Settings
*/
-/* #define CONFIG_BF537_NAND */
-#ifdef CONFIG_BF537_NAND
-# define CONFIG_CMD_NAND
-#endif
-
-#define CONFIG_SYS_NAND_ADDR 0x20212000
-#define CONFIG_SYS_NAND_BASE CONFIG_SYS_NAND_ADDR
+/* #define CONFIG_NAND_PLAT */
+#define CONFIG_SYS_NAND_BASE 0x20212000
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define SECTORSIZE 512
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-#define NAND_ChipID_UNKNOWN 0x00
-#define NAND_MAX_FLOORS 1
-#define BFIN_NAND_READY PF3
-
-#define NAND_WAIT_READY(nand) \
- do { \
- int timeout = 0; \
- while (!(*pPORTFIO & PF3)) \
- if (timeout++ > 100000) \
- break; \
- } while (0)
-
-#define BFIN_NAND_CLE (1 << 2) /* A2 -> Command Enable */
-#define BFIN_NAND_ALE (1 << 1) /* A1 -> Address Enable */
-#define WRITE_NAND_COMMAND(d, adr) bfin_write8(adr | BFIN_NAND_CLE, d)
-#define WRITE_NAND_ADDRESS(d, adr) bfin_write8(adr | BFIN_NAND_ALE, d)
-#define WRITE_NAND(d, adr) bfin_write8(adr, d)
-#define READ_NAND(adr) bfin_read8(adr)
+
+#define BFIN_NAND_CLE(chip) ((unsigned long)chip->IO_ADDR_W | (1 << 2))
+#define BFIN_NAND_ALE(chip) ((unsigned long)chip->IO_ADDR_W | (1 << 1))
+#define BFIN_NAND_READY PF3
+
+#define NAND_PLAT_WRITE_CMD(cmd, chip) bfin_write8(BFIN_NAND_CLE(chip), cmd)
+#define NAND_PLAT_WRITE_ADR(cmd, chip) bfin_write8(BFIN_NAND_ALE(chip), cmd)
+#define NAND_PLAT_DEV_READY(chip) ((*pPORTFIO & BFIN_NAND_READY) ? 1 : 0)
+#define NAND_PLAT_INIT() \
+ *pPORTF_FER &= ~BFIN_NAND_READY; \
+ *pPORTFIO_DIR &= ~BFIN_NAND_READY; \
+ *pPORTFIO_INEN |= BFIN_NAND_READY;
/*
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 030e63c..fa96dcf 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -38,6 +38,9 @@
# define CONFIG_CMD_USB_STORAGE
# define CONFIG_DOS_PARTITION
# endif
+# ifdef CONFIG_NAND_PLAT
+# define CONFIG_CMD_NAND
+# endif
# ifdef CONFIG_POST
# define CONFIG_CMD_DIAG
# endif
--
1.6.2.2
More information about the U-Boot
mailing list