[U-Boot] [PATCH v2] OMAP3: Remove legacy NAND defines

[Dirk Behme]

Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.

Signed-off-by: Dirk Behme <dirk.behme at googlemail.com>
---

For Zoom1 it was already removed by

http://lists.denx.de/pipermail/u-boot/2009-April/050150.html
http://lists.denx.de/pipermail/u-boot/2009-April/050871.html

Changes in v2:

- Remove even more legacy NAND defines. Thanks to Tom Rix for the hint.

This version v2 makes all previous versions of this patch obsolete. 

 include/configs/omap3_beagle.h  |   29 -----------------------------
 include/configs/omap3_evm.h     |   29 -----------------------------
 include/configs/omap3_overo.h   |   30 ------------------------------
 include/configs/omap3_pandora.h |   29 -----------------------------
 4 files changed, 117 deletions(-)

Index: u-boot-main/include/configs/omap3_beagle.h
===================================================================
--- u-boot-main.orig/include/configs/omap3_beagle.h
+++ u-boot-main/include/configs/omap3_beagle.h
@@ -135,18 +135,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define SECTORSIZE			512
-
-#define NAND_ALLOW_ERASE_ALL
-#define ADDR_COLUMN			1
-#define ADDR_PAGE			2
-#define ADDR_COLUMN_PAGE		3
-
-#define NAND_ChipID_UNKNOWN		0x00
-#define NAND_MAX_FLOORS			1
-#define NAND_MAX_CHIPS			1
-#define NAND_NO_RB			1
-#define CONFIG_SYS_NAND_WP
 
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
@@ -306,21 +294,4 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-
-#define WRITE_NAND_COMMAND(d, adr)\
-			writel(d, &nand_cs_base->nand_cmd)
-#define WRITE_NAND_ADDRESS(d, adr)\
-			writel(d, &nand_cs_base->nand_adr)
-#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
-#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
-
-/* Other NAND Access APIs */
-#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-#define NAND_WAIT_READY(nand)	udelay(10)
-
 #endif /* __CONFIG_H */
Index: u-boot-main/include/configs/omap3_evm.h
===================================================================
--- u-boot-main.orig/include/configs/omap3_evm.h
+++ u-boot-main/include/configs/omap3_evm.h
@@ -133,18 +133,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
-#define SECTORSIZE			512
-
-#define NAND_ALLOW_ERASE_ALL
-#define ADDR_COLUMN			1
-#define ADDR_PAGE			2
-#define ADDR_COLUMN_PAGE		3
-
-#define NAND_ChipID_UNKNOWN		0x00
-#define NAND_MAX_FLOORS			1
-#define NAND_MAX_CHIPS			1
-#define NAND_NO_RB			1
-#define CONFIG_SYS_NAND_WP
 
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
@@ -299,23 +287,6 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-
-#define WRITE_NAND_COMMAND(d, adr)\
-			writel(d, &nand_cs_base->nand_cmd)
-#define WRITE_NAND_ADDRESS(d, adr)\
-			writel(d, &nand_cs_base->nand_adr)
-#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
-#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
-
-/* Other NAND Access APIs */
-#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-#define NAND_WAIT_READY(nand)	udelay(10)
-
 /*----------------------------------------------------------------------------
  * SMSC9115 Ethernet from SMSC9118 family
  *----------------------------------------------------------------------------
Index: u-boot-main/include/configs/omap3_overo.h
===================================================================
--- u-boot-main.orig/include/configs/omap3_overo.h
+++ u-boot-main/include/configs/omap3_overo.h
@@ -122,19 +122,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
 						/* devices */
-#define SECTORSIZE			512
-
-#define NAND_ALLOW_ERASE_ALL
-#define ADDR_COLUMN			1
-#define ADDR_PAGE			2
-#define ADDR_COLUMN_PAGE		3
-
-#define NAND_ChipID_UNKNOWN		0x00
-#define NAND_MAX_FLOORS			1
-#define NAND_MAX_CHIPS			1
-#define NAND_NO_RB			1
-#define CONFIG_SYS_NAND_WP
-
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"
@@ -293,21 +280,4 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-
-#define WRITE_NAND_COMMAND(d, adr)\
-			writel(d, &nand_cs_base->nand_cmd)
-#define WRITE_NAND_ADDRESS(d, adr)\
-			writel(d, &nand_cs_base->nand_adr)
-#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
-#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
-
-/* Other NAND Access APIs */
-#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-#define NAND_WAIT_READY(nand)	udelay(10)
-
 #endif				/* __CONFIG_H */
Index: u-boot-main/include/configs/omap3_pandora.h
===================================================================
--- u-boot-main.orig/include/configs/omap3_pandora.h
+++ u-boot-main/include/configs/omap3_pandora.h
@@ -125,18 +125,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
 						/* devices */
-#define SECTORSIZE			512
-
-#define NAND_ALLOW_ERASE_ALL
-#define ADDR_COLUMN			1
-#define ADDR_PAGE			2
-#define ADDR_COLUMN_PAGE		3
-
-#define NAND_ChipID_UNKNOWN		0x00
-#define NAND_MAX_FLOORS			1
-#define NAND_MAX_CHIPS			1
-#define NAND_NO_RB			1
-#define CONFIG_SYS_NAND_WP
 
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
@@ -295,21 +283,4 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-
-#define WRITE_NAND_COMMAND(d, adr)\
-			writel(d, &nand_cs_base->nand_cmd)
-#define WRITE_NAND_ADDRESS(d, adr)\
-			writel(d, &nand_cs_base->nand_adr)
-#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
-#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
-
-/* Other NAND Access APIs */
-#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-#define NAND_WAIT_READY(nand)	udelay(10)
-
 #endif				/* __CONFIG_H */