[U-Boot] [PATCH] ppc4xx: Disable POST memory test on NAND-booting Sequoia

[Stefan Roese]

Don't run the memory POST on the NAND-booting version. It will
overwrite part of the U-Boot image which is already loaded from NAND
to SDRAM. We were just lucky that it booted at all with this SDRAM
test enabled.

Signed-off-by: Stefan Roese <sr at denx.de>
---
 include/configs/sequoia.h |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index a3e2fce..fa226b2 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -301,13 +301,24 @@
 #define CONFIG_SYS_POST_FPU_ON		0
 #endif
 
+/*
+ * Don't run the memory POST on the NAND-booting version. It will
+ * overwrite part of the U-Boot image which is already loaded from NAND
+ * to SDRAM.
+ */
+#if defined(CONFIG_NAND_U_BOOT)
+#define CONFIG_SYS_POST_MEMORY_ON	0
+#else
+#define CONFIG_SYS_POST_MEMORY_ON	CONFIG_SYS_POST_MEMORY
+#endif
+
 /* POST support */
 #define CONFIG_POST		(CONFIG_SYS_POST_CACHE	   | \
 				 CONFIG_SYS_POST_CPU	   | \
 				 CONFIG_SYS_POST_ETHER	   | \
-				 CONFIG_SYS_POST_FPU_ON   | \
+				 CONFIG_SYS_POST_FPU_ON    | \
 				 CONFIG_SYS_POST_I2C	   | \
-				 CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_MEMORY_ON | \
 				 CONFIG_SYS_POST_SPR	   | \
 				 CONFIG_SYS_POST_UART)
 
-- 
1.6.2.3