[U-Boot] [patch u-boot git 2/5] davinci: cpu-specific build uses conditional make syntax

[David Brownell]

From: David Brownell <dbrownell at users.sourceforge.net>

Update cpu/arm926ejs/davinci/Makefile to use COBJ-y type syntax.
Add the first conditional: for EMAC driver support.  Not all
chips have an EMAC; and boards might not use it, anyway.

This doesn't touch PHY configuration; that should eventually
become conditional too.

Signed-off-by: David Brownell <dbrownell at users.sourceforge.net>
---
 cpu/arm926ejs/davinci/Makefile |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/cpu/arm926ejs/davinci/Makefile
+++ b/cpu/arm926ejs/davinci/Makefile
@@ -27,15 +27,17 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).a
 
-COBJS	= timer.o ether.o lxt972.o dp83848.o psc.o
+COBJS-y				+= timer.o psc.o
+COBJS-$(CONFIG_DRIVER_TI_EMAC)	+= ether.o lxt972.o dp83848.o
+
 SOBJS	= reset.o
 
 ifndef CONFIG_SKIP_LOWLEVEL_INIT
 SOBJS	+= lowlevel_init.o
 endif
 
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y) $(SOBJS))
 START	:= $(addprefix $(obj),$(START))
 
 all:	$(obj).depend $(LIB)