[U-Boot] Build errors u-boot-v2 iMX27
Sascha Hauer
s.hauer at pengutronix.de
Mon Apr 20 18:56:55 CEST 2009
Hi Bill,
On Mon, Apr 20, 2009 at 10:57:49AM -0400, Bill Cook wrote:
> Dear ML,
>
> I'm trying to build u-boot-v2 for an iMX27 based board. I'm getting a
> HW/SW floating point mismatch error and hope someone will point me
> to a solution. Building with:
> make ARCH=arm CROSS_COMPILE=arm-eabi-
> It works along fine until I get an error on each of these files:
> arch/arm/lib/_ashldi3.o
> arch/arm/lib/_ashrdi3.o
> arch/arm/lib/_divsi3.o
> arch/arm/lib/_modsi3.o
> arch/arm/lib/_udivsi3.o
> arch/arm/lib/_umodsi3.o
> arch/arm/lib/_lshrdi3.o
> arch/arm/lib/findbit.o
> arch/arm/lib/io-readsb.o
> arch/arm/lib/io-readsw-armv4.o
> arch/arm/lib/io-writesb.o
> arch/arm/lib/io-writesw-armv4.o
>
> Error is:
>
> arm-eabi-ld: ERROR: arch/arm/lib/_ashldi3.o uses hardware FP, whereas
> arch/arm/lib/built-in.o uses software FP
> arm-eabi-ld: failed to merge target specific data of file
> arch/arm/lib/_ashldi3.o
>
>
> The source files are assembly, any C files have the -msoft-float compile option.
> What gives?
All our toolchains produce soft float by default, so this does not show
up here. U-Boot does not use floating point, so I think we do not have
to care what the compiler produces. Does it help to remove the
-msoft-float from arch/arm/Makefile?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the U-Boot
mailing list