[U-Boot] [PATCH] OMAP3: Print correct silicon revision
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Wed Apr 22 23:20:31 CEST 2009
On 21:53 Tue 21 Apr , Sanjeev Premi wrote:
> The function display_board_info() displays the silicon
> revision as 2 - based on the return value from get_cpu_rev().
>
> This is incorrect as the current Si version is 3.1
>
> This patch displays the correct version; but does not
> change get_cpu_rev() to minimize the code impact.
>
> Signed-off-by: Sanjeev Premi <premi at ti.com>
> ---
> cpu/arm_cortexa8/omap3/sys_info.c | 37 +++++++++++++++++++++++++++++++++++--
> 1 files changed, 35 insertions(+), 2 deletions(-)
>
> diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
> index b385b91..8c6a4d6 100644
> --- a/cpu/arm_cortexa8/omap3/sys_info.c
> +++ b/cpu/arm_cortexa8/omap3/sys_info.c
> @@ -36,6 +36,8 @@ static gpmc_csx_t *gpmc_cs_base = (gpmc_csx_t *)GPMC_CONFIG_CS0_BASE;
> static sdrc_t *sdrc_base = (sdrc_t *)OMAP34XX_SDRC_BASE;
> static ctrl_t *ctrl_base = (ctrl_t *)OMAP34XX_CTRL_BASE;
>
> +static char omap_revision[8] = "";
why 8?
you only have 5 chars
so
static char omap_revision[6] = "";
will be enough
> +
> /*****************************************************************
> * dieid_num_r(void) - read and set die ID
> *****************************************************************/
> @@ -90,6 +92,36 @@ u32 get_cpu_rev(void)
>
> }
>
why not this
in the cpu header
#define ES20 1
#define ES21 2
#define ES30 3
#define ES31 4
> +/**
> + * Converts cpu revision into a string
> + */
> +void set_omap_revision(void)
char* get_str_omap_revision(void)
{
u32 idcode;
ctrl_id_t *id_base;
if (omap_revision[0] != '\0')
return omap_revision;
if (get_cpu_rev() == CPU_3430_ES1) {
strcat (omap_revision, "ES1.0");
}
else {
id_base = (ctrl_id_t *)OMAP34XX_ID_L4_IO_BASE;
idcode = readl(&id_base->idcode) >> 28;
switch(idcode) {
case ES20:
strcat (omap_revision, "ES2.0");
break;
case ES21:
strcat (omap_revision, "ES2.1");
break;
case ES30:
strcat (omap_revision, "ES3.0");
break;
case ES31:
strcat (omap_revision, "ES3.1");
break;
default:
strcat (str_rev, "ES??");
}
return omap_revision;
}
Best Regards,
J.
More information about the U-Boot
mailing list