[U-Boot] Booting uImage on the mx31

Daniel Mack daniel at caiaq.de
Thu Apr 23 18:11:30 CEST 2009


On Thu, Apr 23, 2009 at 09:20:41AM -0500, alfred steele wrote:
> Any hints?  I hope with, 0x80008000 as the load address on the MX31,
> you eliminate the cause of one probable failure, overlay memory  with
> the existing code on RAM e.g. existing u-boot and the compressed
> kernel image
> 
> mc911x: MAC 92:92:92:bb:bb:bb
> TFTP from server 206.44.18.25; our IP address is 206.44.18.31
> Filename 'uImage_spin2'.
> Load address: 0x80800000
> Loading: #################################################################
>         #################################################
> done
> Bytes transferred = 1665060 (196824 hex)
> ## Booting kernel from Legacy Image at 80800000 ...
>   Image Name:   Linux-2.6.24-140-g68eb4b4
>   Created:      2009-04-23   3:28:44 UTC
>   Image Type:   ARM Linux Kernel Image (uncompressed)
>   Data Size:    1664996 Bytes =  1.6 MB
>   Load Address: 80008000
>   Entry Point:  80008000
>   Verifying Checksum ... OK
>   Loading Kernel Image ... OK
> OK
> 
> Starting kernel ...
> 
> Uncompressing Linux.............................................................
> ............................................... done, booting the kernel.
> 

See http://lists.arm.linux.org.uk/lurker/message/20081210.174754.29691349.en.html



More information about the U-Boot mailing list