[U-Boot] [PATCHv3 2/3] OMAP3: Remove unused board-types

Sanjeev Premi premi at ti.com
Mon Apr 27 14:38:04 CEST 2009


The board-types defined in struct omap3_sysinfo seem to be
unused. The function display_board_info() is passed
board type as an argument; which is ignored.

This patch removes all uses of board-type, related definitions
and functions.

Signed-off-by: Sanjeev Premi <premi at ti.com>
---
 board/omap3/beagle/beagle.h            |    2 --
 board/omap3/evm/evm.h                  |    2 --
 board/omap3/overo/overo.h              |    2 --
 board/omap3/pandora/pandora.h          |    2 --
 board/omap3/zoom1/zoom1.h              |    2 --
 cpu/arm_cortexa8/omap3/sys_info.c      |   17 -----------------
 include/asm-arm/arch-omap3/omap3.h     |    8 --------
 include/asm-arm/arch-omap3/sys_proto.h |    3 ---
 8 files changed, 0 insertions(+), 38 deletions(-)

diff --git a/board/omap3/beagle/beagle.h b/board/omap3/beagle/beagle.h
index d66f159..5d45f01 100644
--- a/board/omap3/beagle/beagle.h
+++ b/board/omap3/beagle/beagle.h
@@ -24,8 +24,6 @@
 #define _BEAGLE_H_
 
 const omap3_sysinfo sysinfo = {
-	SDP_3430_V1,
-	SDP_3430_V2,
 	DDR_STACKED,
 	"OMAP3 Beagle board",
 #if defined(CONFIG_ENV_IS_IN_ONENAND)
diff --git a/board/omap3/evm/evm.h b/board/omap3/evm/evm.h
index 199824f..4a82a7f 100644
--- a/board/omap3/evm/evm.h
+++ b/board/omap3/evm/evm.h
@@ -24,8 +24,6 @@
 #define _EVM_H_
 
 const omap3_sysinfo sysinfo = {
-	OMAP3EVM_V1,
-	OMAP3EVM_V2,
 	DDR_DISCRETE,
 	"OMAP3 EVM board",
 #if defined(CONFIG_ENV_IS_IN_ONENAND)
diff --git a/board/omap3/overo/overo.h b/board/omap3/overo/overo.h
index e8ccc1d..b595f6a 100644
--- a/board/omap3/overo/overo.h
+++ b/board/omap3/overo/overo.h
@@ -24,8 +24,6 @@
 #define _OVERO_H_
 
 const omap3_sysinfo sysinfo = {
-	SDP_3430_V1,
-	SDP_3430_V2,
 	DDR_STACKED,
 	"Gumstix Overo board",
 #if defined(CONFIG_ENV_IS_IN_ONENAND)
diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h
index dd09f12..8f0838c 100644
--- a/board/omap3/pandora/pandora.h
+++ b/board/omap3/pandora/pandora.h
@@ -24,8 +24,6 @@
 #define _PANDORA_H_
 
 const omap3_sysinfo sysinfo = {
-	SDP_3430_V1,
-	SDP_3430_V2,
 	DDR_STACKED,
 	"OMAP3 Pandora",
 	"NAND",
diff --git a/board/omap3/zoom1/zoom1.h b/board/omap3/zoom1/zoom1.h
index bc8fba8..4f49a41 100644
--- a/board/omap3/zoom1/zoom1.h
+++ b/board/omap3/zoom1/zoom1.h
@@ -28,8 +28,6 @@
 #define _BOARD_ZOOM1_H_
 
 const omap3_sysinfo sysinfo = {
-	SDP_3430_V1,
-	SDP_3430_V2,
 	DDR_STACKED,
 	"OMAP3 Zoom MDK Rev 1",
 	"NAND",
diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
index f13f0be..3f7b5e4 100644
--- a/cpu/arm_cortexa8/omap3/sys_info.c
+++ b/cpu/arm_cortexa8/omap3/sys_info.c
@@ -130,23 +130,6 @@ u32 get_sdr_cs_offset(u32 cs)
 	return offset;
 }
 
-/***********************************************************************
- * get_board_type() - get board type based on current production stats.
- *  - NOTE-1-: 2 I2C EEPROMs will someday be populated with proper info.
- *    when they are available we can get info from there.  This should
- *    be correct of all known boards up until today.
- *  - NOTE-2- EEPROMs are populated but they are updated very slowly.  To
- *    avoid waiting on them we will use ES version of the chip to get info.
- *    A later version of the FPGA migth solve their speed issue.
- ************************************************************************/
-u32 get_board_type(void)
-{
-	if (get_cpu_rev() == CPU_3430_ES2)
-		return sysinfo.board_type_v2;
-	else
-		return sysinfo.board_type_v1;
-}
-
 /***************************************************************************
  *  get_gpmc0_base() - Return current address hardware will be
  *     fetching from. The below effectively gives what is correct, its a bit
diff --git a/include/asm-arm/arch-omap3/omap3.h b/include/asm-arm/arch-omap3/omap3.h
index 8c9656f..d0d2737 100644
--- a/include/asm-arm/arch-omap3/omap3.h
+++ b/include/asm-arm/arch-omap3/omap3.h
@@ -177,14 +177,6 @@ typedef struct gpio {
 #define WIDTH_8BIT		0x0000
 #define WIDTH_16BIT		0x1000	/* bit pos for 16 bit in gpmc */
 
-/* SDP definitions according to FPGA Rev. Is this OK?? */
-#define SDP_3430_V1		0x1
-#define SDP_3430_V2		0x2
-
-/* EVM definitions */
-#define OMAP3EVM_V1		0x1
-#define OMAP3EVM_V2		0x2
-
 /* I2C power management companion definitions */
 #define PWRMGT_ADDR_ID1		0x48
 #define PWRMGT_ADDR_ID2		0x49
diff --git a/include/asm-arm/arch-omap3/sys_proto.h b/include/asm-arm/arch-omap3/sys_proto.h
index 830447b..7361d08 100644
--- a/include/asm-arm/arch-omap3/sys_proto.h
+++ b/include/asm-arm/arch-omap3/sys_proto.h
@@ -22,8 +22,6 @@
 #define _SYS_PROTO_H_
 
 typedef struct {
-	u32 board_type_v1;
-	u32 board_type_v2;
 	u32 mtype;
 	char *board_string;
 	char *nand_string;
@@ -46,7 +44,6 @@ u32 get_sysboot_value(void);
 u32 is_gpmc_muxed(void);
 u32 get_gpmc0_type(void);
 u32 get_gpmc0_width(void);
-u32 get_board_type(void);
 u32 get_sdr_cs_size(u32);
 u32 get_sdr_cs_offset(u32);
 u32 is_running_in_sdram(void);
-- 
1.6.2.1



More information about the U-Boot mailing list