[U-Boot] NAND JFFS2 support in U-Boot 2009.03

[cmfairfa at rockwellcollins.com]

Hi,
In previous versions of U-Boot, there were options for writing JFFS2 file 
systems to NAND (i.e., nand write.jffs2).

Is this command no longer supported in the latest U-Boot release or is the 
command the same as the nand write command?

In other words, was there something special about the" nand write.jffs2" 
command? or is the same thing accomplished by just doing a ""nand write" 
command and specifying the RAM address where a JFFS2 filesystem was 
downloaded?

Thanks.



Christopher M. Fairfax
Sr. Software Engineer
Rockwell Collins
+1 540-428-3344
+1 540-428-3301
cmfairfa at rockwellcollins.com
This message contains PRIVILEGED AND PROPRIETARY INFORMATION intended 
solely for the use of the addressee(s) named above.  Any disclosure, 
distribution, copying or use of the information by others is strictly 
prohibited.  If you have received this message in error, please advise the 
sender by immediate reply and delete the original message.  Thank you.