[U-Boot] [PATCH 1/2][Net][ppc4xx] Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
Ben Warren
biggerbadderben at gmail.com
Wed Apr 29 01:50:53 CEST 2009
All in-tree PPC4xx boards now use CONFIG_NET_MULTI
Signed-off-by: Ben Warren <biggerbadderben at gmail.com>
---
include/configs/AR405.h | 1 +
include/configs/CPCIISER4.h | 1 +
include/configs/CRAYL1.h | 1 +
include/configs/DP405.h | 1 +
include/configs/ERIC.h | 1 +
include/configs/EXBITGEN.h | 1 +
include/configs/HUB405.h | 1 +
include/configs/JSE.h | 1 +
include/configs/MIP405.h | 1 +
include/configs/OCRTC.h | 1 +
include/configs/ORSG.h | 1 +
include/configs/PIP405.h | 1 +
include/configs/W7OLMC.h | 1 +
include/configs/W7OLMG.h | 1 +
include/configs/WUH405.h | 1 +
include/configs/csb272.h | 1 +
include/configs/csb472.h | 1 +
include/configs/netstal-common.h | 2 +-
include/configs/sbc405.h | 1 +
19 files changed, 19 insertions(+), 1 deletions(-)
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index 9f19269..73e34bd 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -71,6 +71,7 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
+#define CONFIG_NET_MULTI
/*
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index 3263712..b2679e5 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -54,6 +54,7 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
+#define CONFIG_NET_MULTI
/*
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 150bd29..96bf161 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -45,6 +45,7 @@
#define CONFIG_PHY_ADDR 1 /* PHY address; handling of ENET */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* early setup for 405gp */
#define CONFIG_MISC_INIT_R 1 /* so that a misc_init_r() is called */
+#define CONFIG_NET_MULTI
/* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to
* keep possible initrd ramdisk decompression out. This is in k (1024 bytes)
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 187547d..7eb9357 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -55,6 +55,7 @@
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
+#define CONFIG_NET_MULTI
/*
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
index 201e62a..023f33e 100644
--- a/include/configs/ERIC.h
+++ b/include/configs/ERIC.h
@@ -96,6 +96,7 @@
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
+#define CONFIG_NET_MULTI
/*
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index 4729464..4d08243 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -81,6 +81,7 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
+#define CONFIG_NET_MULTI
/*
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 0e7d2c0..ea502d4 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -60,6 +60,7 @@
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
+#define CONFIG_NET_MULTI
/*
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 8aca1f9..80c70e4 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -135,6 +135,7 @@
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
+#define CONFIG_NET_MULTI
/*
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index a3869c8..8315cfe 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -341,6 +341,7 @@
#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */
#define CONFIG_PHY_CMD_DELAY 40 /* Intel LXT971A needs this */
+#define CONFIG_NET_MULTI
/************************************************************
* RTC
***********************************************************/
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index 2591f1d..860ec52 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -54,6 +54,7 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
+#define CONFIG_NET_MULTI
/*
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 13d6e04..b2e2d41 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -54,6 +54,7 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
+#define CONFIG_NET_MULTI
/*
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 5c4d69b..e214d70 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -281,6 +281,7 @@
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
+#define CONFIG_NET_MULTI
/************************************************************
* RTC
***********************************************************/
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index ceef76e..553845d 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -68,6 +68,7 @@
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
+#define CONFIG_NET_MULTI
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 11e0630..73d6d24 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -68,6 +68,7 @@
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
+#define CONFIG_NET_MULTI
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index 99188bc..5c281a1 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -58,6 +58,7 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
+#define CONFIG_NET_MULTI
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 204aea0..aed6f50 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -184,6 +184,7 @@
#define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */
/* 32usec min. for LXT971A */
#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
+#define CONFIG_NET_MULTI
/*
* RTC configuration
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 9b3a11c..24b961f 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -183,6 +183,7 @@
#define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */
/* 32usec min. for LXT971A */
#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
+#define CONFIG_NET_MULTI
/*
* RTC configuration
diff --git a/include/configs/netstal-common.h b/include/configs/netstal-common.h
index 4d5c1ab..4bed7ae 100644
--- a/include/configs/netstal-common.h
+++ b/include/configs/netstal-common.h
@@ -61,8 +61,8 @@
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
-#if defined(CONFIG_440)
#define CONFIG_NET_MULTI 1
+#if defined(CONFIG_440)
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_SYS_RX_ETH_BUFFER 32 /* number of eth rx buffers */
#else
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index 7197aaf..242f42f 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -62,6 +62,7 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */
+#define CONFIG_NET_MULTI
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=emac(0,0)host:/T221ppc/target/config/sbc405/vxWorks.st " \
--
1.5.6.3
More information about the U-Boot
mailing list