[U-Boot] Updating u-boot through tftp

[alex889]

Hi,
I'm running u-boot on TI's davinci DM365,
I'm trying to update the u-boot from the u-boot, using these commands:

tftp 0x80700000 u-boot-1.3.4_ipnc_dm36x_xxx.bin 
nand erase 0x2C000 0x20000  
nand write 0x80700000 0x2C000 0x20000   

but when i try to run the erase command, i'm getting this error:

DM365 EVM :>nand erase 0x2c000 0x20000
NAND erase: device 0 offset 0x2c000, size 0x20000
NAND 256MiB 3,3V 8-bit: MTD Erase failure: -22

How can i do it? is this part locked?
Thanks,
Alex                                                
-- 
View this message in context: http://www.nabble.com/-U-Boot--Updating-u-boot-through-tftp-tp24825617p24825617.html
Sent from the Uboot - Users mailing list archive at Nabble.com.