[U-Boot] [PATCH 2/3]: arm: Kirkwood: Check the error summary bit for error detection

[Prafulla Wadaskar]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de 
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Wolfgang Denk
> Sent: Thursday, August 06, 2009 2:37 AM
> To: Ben Warren
> Cc: U-Boot ML
> Subject: Re: [U-Boot] [PATCH 2/3]: arm: Kirkwood: Check the 
> error summary bit for error detection
> 
> Dear Ben,
> 
> In message <20090702150303.53c40e14 at marrow.netinsight.se> 
> Simon Kagstrom wrote:
> > Check the error summary bit for error detection
> > 
> > The Marvell documentation for the 88f6281 states that the 
> error coding 
> > is only valid if the error summary and last frame bits in 
> the transmit 
> > descriptor status field are set. This patch adds checks for 
> these for 
> > transmit (I would get transmit errors on bootp with the 
> current check, 
> > which I believe are spurious).
> > 
> > Signed-off-by: Simon Kagstrom <simon.kagstrom at netinsight.net>
> > ---
> >  drivers/net/kirkwood_egiga.c |    4 +++-
> >  drivers/net/kirkwood_egiga.h |    1 +
> >  2 files changed, 4 insertions(+), 1 deletions(-)
> 
> Ping?
This patch is already applied
Regards..
Prafulla . .

> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: 
> wd at denx.de It's hard to make a program foolproof because 
> fools are so ingenious.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>