[U-Boot] [PATCH] P2020RDB Support Added

[Kumar Gala]

On Aug 5, 2009, at 2:59 AM, Poonam Aggrwal wrote:

> The code base adds P1 & P2 RDB platforms support.
> The folder and file names can cater to future SOCs of P1/P2 family.
> P1 & P2 processors are 85xx platforms, part of Freescale QorIQ series.
>
> Tested following on P2020RDB:
> 1. eTSECs
> 2. DDR, NAND, NOR, I2C.
>
> Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
> ---
> - Based of u-boot version 2009.08-rc1
> - Incorporated comments of Wolfgang.
> - PCIe support  not included, will send as separate patch after some  
> more
>  cleanup in generic 85xx.
> - get_ram_size implementation will be added as a separate patch over  
> this.
> MAINTAINERS                           |    4 +
> MAKEALL                               |    1 +
> Makefile                              |    5 +
> board/freescale/p1_p2_rdb/Makefile    |   52 +++
> board/freescale/p1_p2_rdb/config.mk   |   32 ++
> board/freescale/p1_p2_rdb/ddr.c       |  244 +++++++++++++++
> board/freescale/p1_p2_rdb/law.c       |   37 +++
> board/freescale/p1_p2_rdb/p1_p2_rdb.c |  223 +++++++++++++
> board/freescale/p1_p2_rdb/tlb.c       |   83 +++++
> board/freescale/p1_p2_rdb/u-boot.lds  |  143 +++++++++
> doc/README.p2020rdb                   |  145 +++++++++
> include/configs/P1_P2_RDB.h           |  553 ++++++++++++++++++++++++ 
> +++++++++
> 12 files changed, 1522 insertions(+), 0 deletions(-)
> create mode 100644 board/freescale/p1_p2_rdb/Makefile
> create mode 100644 board/freescale/p1_p2_rdb/config.mk
> create mode 100644 board/freescale/p1_p2_rdb/ddr.c
> create mode 100644 board/freescale/p1_p2_rdb/law.c
> create mode 100644 board/freescale/p1_p2_rdb/p1_p2_rdb.c
> create mode 100644 board/freescale/p1_p2_rdb/tlb.c
> create mode 100644 board/freescale/p1_p2_rdb/u-boot.lds
> create mode 100644 doc/README.p2020rdb
> create mode 100644 include/configs/P1_P2

applied to 85xx next

- k