[U-Boot] [PATCH v2] Add Intel E1000 PCIE card support

[Wolfgang Denk]

Dear Roy Zang,

In message <1249018442.19764.4.camel at rock.ap.freescale.net> you wrote:
> 
> Based on Intel PRO/1000 Network Driver 7.3.20-k2
>   Add Intel E1000 PCIE card support. The following cards are added:
>   INTEL_82571EB_COPPER
>   INTEL_82571EB_FIBER,
>   INTEL_82571EB_SERDES
>   INTEL_82571EB_QUAD_COPPER
>   INTEL_82571PT_QUAD_COPPER
>   INTEL_82571EB_QUAD_FIBER
>   INTEL_82571EB_QUAD_COPPER_LOWPROFILE
>   INTEL_82571EB_SERDES_DUAL
>   INTEL_82571EB_SERDES_QUAD
>   INTEL_82572EI_COPPER
>   INTEL_82572EI_FIBER
>   INTEL_82572EI_SERDES
>   INTEL_82572EI
>   INTEL_82573E
>   INTEL_82573E_IAMT
>   INTEL_82573L
>   INTEL_82546GB_QUAD_COPPER_KSP3
>   INTEL_80003ES2LAN_COPPER_DPT
>   INTEL_80003ES2LAN_SERDES_DPT
>   INTEL_80003ES2LAN_COPPER_SPT
>   INTEL_80003ES2LAN_SERDES_SPT
> 
>  82571EB_COPPER dual ports,
>  82572EI single port,
>  82572EI_COPPER single port PCIE cards
>  and
>  82545EM_COPPER,
>  82541GI_LF
>  pci cards are tested on both  P2020 board
>  and MPC8544DS board.
> 
>  Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>

Unfortunately your driver causes build warnings on the AP1000 board:

e1000.c:131: warning: 'e1000_read_eeprom' used but never defined
e1000.c:2012: warning: 'e1000_set_phy_mode' defined but not used

Please provide a fix.  Thanks in advance.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Suffocating together ... would create heroic camaraderie.
	-- Khan Noonian Singh, "Space Seed", stardate 3142.8